Daily Papers

Large language model (LLM)-based agent applications often incur high response time. Speculative decoding is a promising solution to improve the inference efficiency of LLM agents without impacting generation quality. However, state-of-the-art speculative decoding algorithms exhibit substantial speed degradation under large batch sizes, limiting their effectiveness to deploy in real-world agent applications. In this work, we first present a systematic analysis of speculative decoding for LLM agents and identify two dominant factors of speedup degradation: high rejection rate of speculative tokens, and under-utilization of dynamic token budgets.B ased on these observations, we propose AgentSpec, a speculative decoding algorithm that addresses the limitations of existing methods for LLM agents. AgentSpec incorporates structure-isolated drafting that constrains speculation to semantically coherent segments of the agent workflow, reducing the drafts of irrelevant semantic paths and achieving an extremely low rejection rate. Moreover, AgentSpec adopts redundancy-aware budget allocation that exploits agent-level information to better utilize the dynamically-free token budget during the agent inference. We implement and evaluate AgentSpec on five different workloads and four different models from four different LLM families in vLLM. Our results demonstrate the superiority of AgentSpec over state-of-the-arts.

Block drafters propose several tokens in one forward pass, before earlier target tokens are realised. Their rejection mixes two losses: missing within-block path information and imperfect modelling of observable information. Accepted length cannot distinguish them. We separate the two with an information floor, the minimum expected rejection at a specified conditioning order; rejection above this floor is the model gap. Estimating both from target rollouts across four domains, four open-weight targets, and a frontier API target yields three findings. First, the all-parallel floor reaches 0.286 at the final slot on Qwen3-4B, limiting even the best proposal to 71% per-slot acceptance. Second, one realised token removes 86--100% of this floor, a locality also recovered by an independent mutual-information analysis. Third, current drafters remain far above their floors: the final-slot model gap accounts for 43--64% of DFlash rejection and 85--92% of DSpark's oracle-conditioned rejection. These findings separate the value of short-range conditioning from proposal quality. Guided by this distinction, we replace a context-independent predecessor correction with a prefix-attention head that reads committed context conditional on the predecessor. With supporting backbone components, the resulting Qwen3-4B drafter improves mean serving accepted length by 3.83% over the released DSpark checkpoint across nine tasks, without increasing the conditioning order.

Speculative decoding accelerates LLM inference by drafting a tree of candidate continuations and verifying it in one target forward. Existing drafters fall into two camps with opposite weaknesses. Autoregressive drafters such as EAGLE-3 preserve dependence along each draft path but call the drafter once per tree depth, making drafting a non-trivial share of per-iteration latency. Parallel drafters cut drafter calls by predicting multiple future positions in one forward, but each position is predicted without seeing the others, producing paths the verifier rejects. In this paper, we propose SpecBlock, a block-iterative drafter that combines path dependence with cheap drafting. Each drafter forward produces K dependent positions and we call this a block. The draft tree grows through repeated block expansions. Two mechanisms explicitly carry path dependence to keep later draft positions accurate. Within each block, a layer-wise shift carries the previous position's hidden state into every decoder layer. Across blocks, each new block can start from any position of the previous block, inheriting its hidden state to extend the path. To spend verifier budget where acceptance is likely, a co-trained rank head replaces the fixed top-k tree by allocating per-position branching during drafting. To avoid training the drafter on prefixes it never produces at inference, a valid-prefix mask drops the loss at later positions once an earlier one is wrong. Beyond static drafting, a cost-aware bandit at deployment uses free verifier feedback to update the drafter selectively, only when the expected throughput gain exceeds the update cost. Experiments show that SpecBlock improves mean speedup by 8-13% over EAGLE-3 at 44-52% of its drafting cost, and cost-aware adaptation extends this lead to 11-19%.

Block-diffusion drafters like dFlash generate an entire block of draft tokens in a single forward pass, drastically reducing the overhead of multiple-token drafting in speculative decoding. The crucial final step of the single-pass discrete denoising process involves using the logit distribution at each position to sample conditionally independent tokens. The resulting draft is thus a set of per-position marginals, rather than a joint distribution: no draft token is guaranteed to depend on its predecessors. Such independently sampled marginals tend to produce sequences with tokens that are individually likely, but jointly improbable under the target model's distribution, which verifies each token conditionally. This can cause early rejection and limits acceptance length. To address this, we propose xPress as a means to restore the missing causality in diffusion drafters. xPress is a lightweight causal refiner that reconciles the whole diffusion block at once through parallel refinement, restoring and propagating causal dependencies across the draft without a token-by-token loop. On Qwen3-8B, across seven math, code, and chat benchmarks, xPress raises acceptance length by about 30% on average (up to +56%) and its end-to-end decoding throughput by about 1.3 on average (up to 1.7) compared to the original dFlash diffusion drafter.

Accelerating inference in Large Language Models (LLMs) is critical for real-time interactions, as they have been widely incorporated into real-world services. Speculative decoding, a fully algorithmic solution, has gained attention for improving inference speed by drafting and verifying tokens, thereby generating multiple tokens in a single forward pass. However, current drafting strategies usually require significant fine-tuning or have inconsistent performance across tasks. To address these challenges, we propose Hierarchy Drafting (HD), a novel lossless drafting approach that organizes various token sources into multiple databases in a hierarchical framework based on temporal locality. In the drafting step, HD sequentially accesses multiple databases to obtain draft tokens from the highest to the lowest locality, ensuring consistent acceleration across diverse tasks and minimizing drafting latency. Our experiments on Spec-Bench using LLMs with 7B and 13B parameters demonstrate that HD outperforms existing database drafting methods, achieving robust inference speedups across model sizes, tasks, and temperatures.

Addressing a structural-engineering request requires more than a single answer; it requires a chain of interdependent artifacts: interpreted requirements, a computable model, validation records, solver outputs, code-check records, and a final report. Evaluations centered on question answering or script generation rarely verify this complete evidence chain and may therefore reward fluent outputs even when the underlying engineering workflow is incomplete, internally inconsistent, or non-executable. To address this limitation, we present StructureClaw, an artifact-centered workbench in which LLM agents operate through governed engineering skills, typed tools, shared artifact state, and local analysis backends. We also introduce StructureClaw-Bench, an executable benchmark of 150 controlled scenarios spanning standard workflow execution, interactive robustness, and multimodal structural-model reconstruction. A scenario succeeds only when all required artifact- and execution-level assertions pass in a single run. Across ten agent-model configurations, each evaluated on the same 50 standard cases, the average Success Rate rises from 56.8% with the generic-skill baseline to 88.6% with the full automatic workflow. The interactive and multimodal evaluations identify two prominent remaining challenges: safe handling of invalid numerical inputs and fixture-consistent reconstruction of structural models. These findings show that artifact-centered evaluation can expose workflow-level failures that are difficult to identify from final responses alone, providing a more rigorous basis for evaluating and improving structural-engineering agents. The code and benchmark are available at https://github.com/structureclaw/structureclaw.

Three-dimensional building generation is vital for applications in gaming, virtual reality, and digital twins, yet current methods face challenges in producing diverse, structured, and hierarchically coherent buildings. We propose BuildingBlock, a hybrid approach that integrates generative models, procedural content generation (PCG), and large language models (LLMs) to address these limitations. Specifically, our method introduces a two-phase pipeline: the Layout Generation Phase (LGP) and the Building Construction Phase (BCP). LGP reframes box-based layout generation as a point-cloud generation task, utilizing a newly constructed architectural dataset and a Transformer-based diffusion model to create globally consistent layouts. With LLMs, these layouts are extended into rule-based hierarchical designs, seamlessly incorporating component styles and spatial structures. The BCP leverages these layouts to guide PCG, enabling local-customizable, high-quality structured building generation. Experimental results demonstrate BuildingBlock's effectiveness in generating diverse and hierarchically structured buildings, achieving state-of-the-art results on multiple benchmarks, and paving the way for scalable and intuitive architectural workflows.

Generating realistic interior furniture layouts that strictly adhere to architectural constraints (e.g., walls, doors, and windows) remains a fundamental challenge in automated spatial design. Existing approaches, primarily based on one-shot generation using diffusion models or Large Language Models (LLMs), lack explicit mechanisms for intermediate geometric constraint verification, often resulting in structural collisions and functionally infeasible arrangements under complex room constraints. To address these challenges, we propose Agentic Designer, a progressive, multi-agent framework that formulates structure-aware interior layout generation as an iterative and constraint-verified decision process. By decomposing layout synthesis into modular stages of proposal, verification, and adjustment, the framework coordinates three specialized agents, a Generator, an Evaluator, and a Refiner, through a Progressive Consensus Mechanism. This mechanism enforces stepwise geometric validation and correction before each placement is committed, thereby preventing error accumulation. To facilitate this structure-aware paradigm and standardize evaluation, we establish InStruct, a comprehensive benchmark that integrates a dataset comprising over 18,000 high-quality, parametrically annotated samples with a novel suite of structure-centric metrics. Extensive quantitative evaluations, qualitative analyses, and user studies show that Agentic Designer significantly outperforms state-of-the-art methods, demonstrating substantial improvements in strict structural adherence and functional design coherence.

Speculative decoding enhances the efficiency of large language models (LLMs) by leveraging a draft model to draft for a larger target model to review. However, drafting in speculative decoding involves slow autoregressive generation and generating tokens of different importance with the same time allocation. These two inefficiencies lead to its suboptimal performance. To address this issue, we introduce Cascade Speculative Drafting (CS. Drafting), a novel approach that employs two types of cascades. The Vertical Cascade eliminates autoregressive generation from neural models. The Horizontal Cascade constitutes efficient time allocation in drafting with its optimality supported by our theoretical analysis. Combining both cascades, our CS. Drafting algorithm has achieved up to 72 percent additional speedup over speculative decoding in our experiments while keeping the same output distribution.

Multi-LLM revision pipelines, in which a second model reviews and improves a draft produced by a first, are widely assumed to derive their gains from genuine error correction. We question this assumption with a controlled decomposition experiment that uses four matched conditions to separate second-pass gains into three additive components: re-solving, scaffold, and content. We evaluate this design across two model pairs on three benchmarks spanning knowledge-intensive MCQ and competitive programming. Our results show that the gains of multi-LLM revision are not monolithic, but depend on task structure, draft quality, and the type of draft information. On MCQ tasks, where the answer space is constrained and drafts provide little structural guidance, most gains are consistent with stronger-model re-solving, and directly routing queries to the stronger model can be more effective than revising a weak draft. On code generation tasks, however, two-stage prompting remains useful because even semantically null drafts can provide substantial structural scaffolding, while weak draft content can be harmful. Finally, role-reversed experiments show that strong drafts clearly benefit weak reviewers. Ultimately, our findings demonstrate that the utility of multi-LLM revision is dynamically bottlenecked by task structure and draft quality, necessitating more targeted pipeline designs rather than blanket revision strategies.

Computer-aided design (CAD) is the backbone of modern industrial design, yet learned CAD generators still fall short of real engineering pipelines: they neither iterate like engineers nor evaluate what engineering requires. Prior work has treated CAD generation as two disjoint steps, part synthesis and assembly, where the former is graded by proximity to a gold reference and the latter, when handled at all, is reduced to a separate constraint solving step. In this work, we introduce a more industry-native task formulation that requires a model to produce a fully assembled multi-part STEP file from a free-form engineering brief, which is then validated via finite element analysis (FEA). FEA validation reveals that Codex (GPT-5.5) and Claude Code (Opus-4.7) agents do not produce a single strict-passing artifact in the main first-attempt sweep, with the best configuration meeting only about 20% of typed requirements on average. Moreover, we introduce two additional supervision signals, a novel text-only blueprint schema and a 21-view image renderer that aids the agent's visual inspection, that better align the generation loop with how engineers iterate in practice. On S2O and Fusion360, the same feedback tools improve geometric reconstruction, with GPT-5.5/xhigh rising from 0.444 to 0.592 Box-IoU on S2O and from 0.397 to 0.505 on Fusion360. Together these signals move CAD programs toward artifacts that are not only visually plausible but also checked against physical and structural requirements.

Many real-world games do not admit a fixed, compact rule set: instead, their dynamics are defined by interactions among a large and often evolving collection of game pieces, making general-purpose policy learning impractical. Magic: the Gathering (MTG) exemplifies this setting, where the cards themselves define and alter gameplay rules, strategic constraints, and long-term outcomes, while the pool of available cards is ever-changing. We study Draft, a constrained deck-building format of MTG in which eight players make 39-45 sequential selections from semi-random packs to construct a 40-card deck under partial information. By isolating the card selection process from gameplay, Draft provides a tractable yet non-trivial setting for studying decision-making driven by combinatorial card synergies. We propose an encoder-based model that produces set-contextualized card embeddings to encode the draft decision sequence, with a consistent improvement over linear baselines on large-scale real-world data, establishing a first learned benchmark for outcome prediction in MTG Draft. Our code is available at github.com/akulen/MtGDraftEncoder.

The autoregressive nature of large language models (LLMs) remains a significant bottleneck for inference, particularly in complex agentic workloads. While speculative decoding (SD) accelerates inference, current approaches rely on static drafting paradigms, utilising either autoregressive drafting models for reasoning or diffusion-based parallel drafting models for structured outputs. We empirically find that drafting accuracy fluctuates dramatically within a single sequence, leaving significant performance unrealised by static paradigms and coarse-grained routing. To address this volatility, we introduce WhiFlash, the first cross-paradigm SD method that unifies autoregressive and diffusion-based parallel drafting under a single token-level controller. WhiFlash adopts a fine-grained routing mechanism that employs either a lightweight entropy-based or a learned neural policy, both parametrised to provide a tunable balance between expected token gain and latency. To make high-frequency switching computationally viable, we introduce novel cache-management optimisations, Lazy Catch-up and KV-only Prefill, reducing switching overhead to below 7% of per-round latency. By capitalising on the complementary strengths of fundamentally distinct drafting architectures, WhiFlash achieves significantly higher acceptance lengths, yielding category-specific throughput gains of up to 69.6% over the state-of-the-art autoregressive EAGLE-3 and 37.3% over the diffusion-based DFlash.

In this report, we introduce UltraShape 1.0, a scalable 3D diffusion framework for high-fidelity 3D geometry generation. The proposed approach adopts a two-stage generation pipeline: a coarse global structure is first synthesized and then refined to produce detailed, high-quality geometry. To support reliable 3D generation, we develop a comprehensive data processing pipeline that includes a novel watertight processing method and high-quality data filtering. This pipeline improves the geometric quality of publicly available 3D datasets by removing low-quality samples, filling holes, and thickening thin structures, while preserving fine-grained geometric details. To enable fine-grained geometry refinement, we decouple spatial localization from geometric detail synthesis in the diffusion process. We achieve this by performing voxel-based refinement at fixed spatial locations, where voxel queries derived from coarse geometry provide explicit positional anchors encoded via RoPE, allowing the diffusion model to focus on synthesizing local geometric details within a reduced, structured solution space. Our model is trained exclusively on publicly available 3D datasets, achieving strong geometric quality despite limited training resources. Extensive evaluations demonstrate that UltraShape 1.0 performs competitively with existing open-source methods in both data processing quality and geometry generation. All code and trained models will be released to support future research.

As large language models (LLMs) scale up, accuracy improves, but the autoregressive (AR) nature of decoding increases latency since each token requires a serial forward pass. Speculative decoding addresses this by employing a fast drafter to propose multi-token drafts, which are then verified in parallel by the target model. However, many deployments still rely on AR drafters, where sequential passes limit wall-clock gains. We revisit the drafting stage and present DiffuSpec, a training-free drop-in framework that uses a pretrained diffusion language model (DLM) to produce multi-token drafts in a single forward pass, while remaining compatible with standard AR verifiers. Because DLM drafts are generated under bidirectional conditioning, parallel per-position candidates form a token lattice in which the locally highest-probability token at each position need not form a causal left-to-right path. Moreover, DLM drafting requires pre-specifying a draft length, inducing a speed-quality trade-off. To address these challenges, we introduce two practical components: (i) a causal-consistency path search (CPS) over this lattice that extracts a left-to-right path aligned with AR verification; and (ii) an adaptive draft-length (ADL) controller that adjusts next proposal size based on recent acceptance feedback and realized generated length. Across benchmarks, DiffuSpec yields up to 3x wall-clock speedup, establishing diffusion-based drafting as a robust alternative to autoregressive drafters for speculative decoding.

Computer-aided design (CAD) tools are utilized in the manufacturing industry for modeling everything from cups to spacecraft. These programs are complex to use and typically require years of training and experience to master. Structured and well-constrained 2D sketches and 3D constructions are crucial components of CAD modeling. A well-executed CAD model can be seamlessly integrated into the manufacturing process, thereby enhancing production efficiency. Deep generative models of 3D shapes and 3D object reconstruction models have garnered significant research interest. However, most of these models produce discrete forms of 3D objects that are not editable. Moreover, the few models based on CAD operations often have substantial input restrictions. In this work, we fine-tuned pre-trained models to create OpenECAD models (0.55B, 0.89B, 2.4B and 3.1B), leveraging the visual, logical, coding, and general capabilities of visual language models. OpenECAD models can process images of 3D designs as input and generate highly structured 2D sketches and 3D construction commands, ensuring that the designs are editable. These outputs can be directly used with existing CAD tools' APIs to generate project files. To train our network, we created a series of OpenECAD datasets. These datasets are derived from existing public CAD datasets, adjusted and augmented to meet the specific requirements of vision language model (VLM) training. Additionally, we have introduced an approach that utilizes dependency relationships to define and generate sketches, further enriching the content and functionality of the datasets.

Recently, there is a growing interest in creating computer-aided design (CAD) models based on user intent, known as controllable CAD generation. Existing work offers limited controllability and needs separate models for different types of control, reducing efficiency and practicality. To achieve controllable generation across all CAD construction hierarchies, such as sketch-extrusion, extrusion, sketch, face, loop and curve, we propose FlexCAD, a unified model by fine-tuning large language models (LLMs). First, to enhance comprehension by LLMs, we represent a CAD model as a structured text by abstracting each hierarchy as a sequence of text tokens. Second, to address various controllable generation tasks in a unified model, we introduce a hierarchy-aware masking strategy. Specifically, during training, we mask a hierarchy-aware field in the CAD text with a mask token. This field, composed of a sequence of tokens, can be set flexibly to represent various hierarchies. Subsequently, we ask LLMs to predict this masked field. During inference, the user intent is converted into a CAD text with a mask token replacing the part the user wants to modify, which is then fed into FlexCAD to generate new CAD models. Comprehensive experiments on public dataset demonstrate the effectiveness of FlexCAD in both generation quality and controllability. Code will be available at https://github.com/microsoft/FlexCAD.

Automated analysis for engineering structures offers considerable potential for boosting efficiency by minimizing repetitive tasks. Although AI-driven methods are increasingly common, no systematic framework yet leverages Large Language Models (LLMs) for automatic structural analysis. To address this gap, we propose a novel framework that integrates LLMs with structural analysis software. LLMs serve as the core engine: they parse structural descriptions from text and translate them into executable Python scripts. Moreover, the framework integrates the generative capabilities of LLMs with code-based finite element (FE) tools like OpenSeesPy. It employs domain-specific prompt design and in-context learning strategies to enhance the LLM's problem-solving capabilities and generative stability, enabling fully automated structural analysis from descriptive text to model outputs. In our experiments, we introduce a well-curated small-scale benchmark dataset of 20 structural analysis word problems (SAWPs) with ground-truth solutions and evaluate the performance of different LLMs within our framework in solving these SAWPs. The role of system instructions, crafted by structural engineers, is also investigated to understand their impact on LLM-driven structural analysis. Additionally, the generative stability of our framework is examined. Through multiple validation experiments on the benchmark, our results demonstrate that the proposed framework can substantially increase the level of automation in solving SAWPs compared to traditional methods. Quantitatively, the framework, built on GPT-4o, achieved 100% accuracy, surpassing GPT-4 (85%), Gemini 1.5 Pro (80%), and Llama-3.3 (30%) on the test examples. Furthermore, integrating domain-specific instructions enhanced performance by 30% on problems with asymmetrical structural configurations.

Speculative decoding (SD) accelerates autoregressive Large Language Models (LLMs) by drafting multiple tokens and verifying them in parallel, but it faces a scaling limitation: increasing the draft budget improves speed only when acceptance remains high and drafting overhead stays low. This ceiling has been difficult to break because prior head-based SD methods face a causality-efficiency dilemma. Autoregressive drafters produce path-conditioned candidates that are effective for tree speculative decoding with higher acceptance length, but their drafting cost grows with tree depth. Bidirectional block-diffusion drafters generate all positions in one pass, but their branch-agnostic marginals can form individually plausible yet mutually inconsistent trees, wasting budget and reducing acceptance. We propose JetSpec, a head-based SD framework that combines one-forward drafting efficiency with branch-wise causal conditioning. JetSpec trains a causal parallel draft head over fused hidden states from the frozen target model, producing candidate trees whose scores align with the target model's autoregressive factorization. This enables JetSpec to convert larger draft budgets into longer accepted prefixes and higher end-to-end speedup. Across math, coding, and chat benchmarks on dense and MoE Qwen3 models, JetSpec consistently outperforms bidirectional-head and tree-based SD baselines. On H100 GPUs, JetSpec achieves up to 9.64x speedup on MATH-500 and 4.58x on open-ended conversational workloads, with further latency gains demonstrated through vLLM integration under realistic serving loads. Our code and models are available at https://github.com/hao-ai-lab/JetSpec.

Speculative decoding accelerates memory-bound LLM decoding with a lightweight drafter, and parallel drafters extend this speedup by drafting a whole block in one forward pass. However, it remains unclear whether their released systems (stock) attain the full speedup that parallel drafting permits. We identify three challenges. First, with one request, each step accepts few tokens but reads every target weight. Second, with batching, per-request verification work roughly halves the speedup over autoregressive (AR) decoding. Third, speculative decoding is deployment-specific, and no universal optimization fits every serving regime, drafter, target model and GPU. To address these challenges, we present SpecPilot, an autonomous agentic loop that discovers algorithms and systems optimizations for each deployment. In each round, a cost model locates the largest gaps between the current system and its ceiling. Parallel agents explore directions and integrate the successful ones. Token forcing checks every output token against stock to detect reward hacking. A structured memory carries validated mechanisms to new rounds and deployments. SpecPilot discovered a general lossless 12-bit weight format, tree verification for hybrid recurrent targets, two-level verification and three batching mechanisms. We evaluate it across four target models, three drafters, two GPU platforms and five benchmarks. Without training or quality loss, it raises the speedup over AR from stock's 4.46times to 10.87times with one request, and from 1.94times to 3.93times with batching.

This paper introduces StructDiff, a generative framework based on a single-scale diffusion model for single-image generation. Single-image generation aims to synthesize diverse samples with similar visual content to the source image by capturing its internal statistics, without relying on external data. However, existing methods often struggle to preserve the structural layout, especially for images with large rigid objects or strict spatial constraints. Moreover, most approaches lack spatial controllability, making it difficult to guide the structure or placement of generated content. To address these challenges, StructDiff introduces an adaptive receptive field module to maintain both global and local distributions. Building on this foundation, StructDiff incorporates 3D positional encoding (PE) as a spatial prior, allowing flexible control over positions, scale, and local details of generated objects. To our knowledge, this spatial control capability represents the first exploration of PE-based manipulation in single-image generation. Furthermore, we propose a novel evaluation criterion for single-image generation based on large language models (LLMs). This criterion specifically addresses the limitations of existing objective metrics and the high labor costs associated with user studies. StructDiff also demonstrates broad applicability across downstream tasks, such as text-guided image generation, image editing, outpainting, and paint-to-image synthesis. Extensive experiments demonstrate that StructDiff outperforms existing methods in structural consistency, visual quality, and spatial controllability. The project page is available at https://butter-crab.github.io/StructDiff/.

We present a novel task: text-to-3D sketch animation, which aims to bring freeform sketches to life in dynamic 3D space. Unlike prior works focused on photorealistic content generation, we target sparse, stylized, and view-consistent 3D vector sketches, a lightweight and interpretable medium well-suited for visual communication and prototyping. However, this task is very challenging: (i) no paired dataset exists for text and 3D (or 4D) sketches; (ii) sketches require structural abstraction that is difficult to model with conventional 3D representations like NeRFs or point clouds; and (iii) animating such sketches demands temporal coherence and multi-view consistency, which current pipelines do not address. Therefore, we propose 4-Doodle, the first training-free framework for generating dynamic 3D sketches from text. It leverages pretrained image and video diffusion models through a dual-space distillation scheme: one space captures multi-view-consistent geometry using differentiable Bézier curves, while the other encodes motion dynamics via temporally-aware priors. Unlike prior work (e.g., DreamFusion), which optimizes from a single view per step, our multi-view optimization ensures structural alignment and avoids view ambiguity, critical for sparse sketches. Furthermore, we introduce a structure-aware motion module that separates shape-preserving trajectories from deformation-aware changes, enabling expressive motion such as flipping, rotation, and articulated movement. Extensive experiments show that our method produces temporally realistic and structurally stable 3D sketch animations, outperforming existing baselines in both fidelity and controllability. We hope this work serves as a step toward more intuitive and accessible 4D content creation.

To combat the memory bandwidth-bound nature of autoregressive LLM inference, previous research has proposed the speculative decoding framework. To perform speculative decoding, a small draft model proposes candidate continuations of the input sequence, that are then verified in parallel by the base model. One way to specify the draft model, as used in the recent Medusa decoding framework, is as a collection of light-weight heads, called draft heads, that operate on the base model's hidden states. To date, all existing draft heads have been sequentially independent, meaning that they speculate tokens in the candidate continuation independently of any preceding tokens in the candidate continuation. In this work, we propose Hydra heads, a sequentially dependent, drop-in replacement for standard draft heads that significantly improves speculation accuracy. Decoding with Hydra heads improves throughput compared to Medusa decoding with standard draft heads. We further explore the design space of Hydra head training objectives and architectures, and propose a carefully-tuned Hydra head recipe, which we call Hydra++, that improves decoding throughput by 1.31x and 2.71x compared to Medusa decoding and autoregressive decoding, respectively. Overall, Hydra heads are a simple intervention on standard draft heads that significantly improve the end-to-end speed of draft head based speculative decoding.

Speculative decoding is an effective and lossless approach for accelerating LLM inference. However, existing widely adopted model-based draft designs, such as EAGLE3, improve accuracy at the cost of multi-step autoregressive inference, resulting in high drafting latency and ultimately rendering the drafting stage itself a performance bottleneck. Inspired by diffusion-based large language models (dLLMs), we propose DART, which leverages parallel generation to reduce drafting latency. DART predicts logits for multiple future masked positions in parallel within a single forward pass based on hidden states of the target model, thereby eliminating autoregressive rollouts in the draft model while preserving a lightweight design. Based on these parallel logit predictions, we further introduce an efficient tree pruning algorithm that constructs high-quality draft token trees with N-gram-enforced semantic continuity. DART substantially reduces draft-stage overhead while preserving high draft accuracy, leading to significantly improved end-to-end decoding speed. Experimental results demonstrate that DART achieves a 2.03x--3.44x wall-clock time speedup across multiple datasets, surpassing EAGLE3 by 30% on average and offering a practical speculative decoding framework. Code is released at https://github.com/fvliang/DART.

Drafting, i.e., the selection of a subset of items from a larger candidate set, is a key element of many games and related problems. It encompasses team formation in sports or e-sports, as well as deck selection in many modern card games. The key difficulty of drafting is that it is typically not sufficient to simply evaluate each item in a vacuum and to select the best items. The evaluation of an item depends on the context of the set of items that were already selected earlier, as the value of a set is not just the sum of the values of its members - it must include a notion of how well items go together. In this paper, we study drafting in the context of the card game Magic: The Gathering. We propose the use of a contextual preference network, which learns to compare two possible extensions of a given deck of cards. We demonstrate that the resulting network is better able to evaluate card decks in this game than previous attempts.

We present Muses, the first training-free method for fantastic 3D creature generation in a feed-forward paradigm. Previous methods, which rely on part-aware optimization, manual assembly, or 2D image generation, often produce unrealistic or incoherent 3D assets due to the challenges of intricate part-level manipulation and limited out-of-domain generation. In contrast, Muses leverages the 3D skeleton, a fundamental representation of biological forms, to explicitly and rationally compose diverse elements. This skeletal foundation formalizes 3D content creation as a structure-aware pipeline of design, composition, and generation. Muses begins by constructing a creatively composed 3D skeleton with coherent layout and scale through graph-constrained reasoning. This skeleton then guides a voxel-based assembly process within a structured latent space, integrating regions from different objects. Finally, image-guided appearance modeling under skeletal conditions is applied to generate a style-consistent and harmonious texture for the assembled shape. Extensive experiments establish Muses' state-of-the-art performance in terms of visual fidelity and alignment with textual descriptions, and potential on flexible 3D object editing. Project page: https://luhexiao.github.io/Muses.github.io/.

Speculative decoding accelerates autoregressive generation in large language models. In each drafting stage, a lightweight draft model proposes tokens that the target model subsequently verifies. With increasingly capable draft models, we find that the target model frequently accepts all tokens produced in a drafting stage. A verification nevertheless follows each drafting stage, resulting in unnecessary target-model forward passes even when drafting could have continued. Adaptive draft length methods decide during decoding how many draft tokens precede a verification, but they raise the speedup only for autoregressive draft models. For a parallel draft model, drafting further requires target-model hidden states for draft tokens that have not been verified. We propose DLoop, a looped form of speculative decoding that adaptively performs multiple drafting stages before verification. DLoop continues drafting while the draft model remains confident and verifies all accumulated draft tokens together. Loop-aware training keeps the draft model reliable in the additional drafting stages by exposing it to its own hidden states for unverified draft tokens. By spending additional draft-model forward passes, DLoop reduces the number of target-model forward passes required for verification. Across diverse speculative decoding methods including EAGLE-3, DFlash, Domino, DSpark, and multi-token prediction modules, DLoop improves the wall-clock speedup by 5 to 41 percent while preserving lossless decoding. Code will be available at https://github.com/naver-ai/DLoop.

Creating graphic layouts is a fundamental step in graphic designs. In this work, we present a novel generative model named LayoutDiffusion for automatic layout generation. As layout is typically represented as a sequence of discrete tokens, LayoutDiffusion models layout generation as a discrete denoising diffusion process. It learns to reverse a mild forward process, in which layouts become increasingly chaotic with the growth of forward steps and layouts in the neighboring steps do not differ too much. Designing such a mild forward process is however very challenging as layout has both categorical attributes and ordinal attributes. To tackle the challenge, we summarize three critical factors for achieving a mild forward process for the layout, i.e., legality, coordinate proximity and type disruption. Based on the factors, we propose a block-wise transition matrix coupled with a piece-wise linear noise schedule. Experiments on RICO and PubLayNet datasets show that LayoutDiffusion outperforms state-of-the-art approaches significantly. Moreover, it enables two conditional layout generation tasks in a plug-and-play manner without re-training and achieves better performance than existing methods.

One-shot block drafters for speculative decoding generate the full draft in a single forward pass, achieving strong throughput by eliminating sequential token generation. However, they predict each draft token conditioned only on the prefix context, with no dependence on previously drafted tokens. This non-autoregressive conditioning causes the drafter's distribution to diverge from the verifier's true autoregressive distribution as draft depth grows. This problem becomes more severe in tree-based drafting, where distinct branches are forced to share the same marginal distribution for subsequent tokens. We propose TreeFlash, which addresses this by incorporating an MLP layer conditioned on the drafter's hidden state and the previous token to approximate an autoregressive distribution. TreeFlash retains the O(1) decoding time complexity of one-shot drafters by employing a two-stage approximation mechanism. TreeFlash achieves state-of-the-art performance across a variety of tasks and models, improving over marginal tree drafting by 12% higher block efficiency and 9% higher speedup.

Recurrent delta-rule models keep a fixed-size state matrix S (d_v x d_k) that compresses all past context. The state of the art (GDN-2) gates this update with element-wise matrix erase/write masks. This is powerful but has two defects. First, both gates are computed from the incoming token alone, making the model memory-blind: it decides what to erase without seeing what it has stored. Second, value-axis coupling in the erase gate blocks the WY-form triangular chunk solver that drives efficient training -- the intra-chunk system splits into d_v independent solves, collapsing throughput to serial-recurrence cost. We introduce CARVE (Content-Aware Recurrent with Value Efficiency), which fixes both and, via a single-launch "megakernel" scheduling of the same WY-form math, trains faster than the matrix-gated baseline it replaces. The key idea is architectural: restricting all gating to the key axis makes the intra-chunk coupling independent of the value index, restoring one unmodified WY-form solve. Within this constraint, CARVE conditions both gates on a content signal read once per chunk from the chunk-boundary state and folded algebraically into each gate's low-rank projection (by associativity, U(Sq)=(US)q), giving memory-aware gating at negligible extra traffic. At init the content projections are zero, so CARVE is bit-identical to the baseline; we prove the one-chunk staleness perturbs gates by only O(1/sqrt(L)), matching a measured 0.18% deviation flat up to L=128. At 1.3B parameters / 100B FineWeb-Edu tokens on H100 (three seeds), CARVE improves every axis: WikiText perplexity 15.72 vs 15.90 (hybrid 15.41 vs 15.62), +0.63 pp average common-sense accuracy, and state-of-the-art RULER and real-world recall -- while training +1.4% faster at matched depth and +19.3% at iso-quality depth, at +13% peak memory. Backed by six formal guarantees.

Speculative decoding accelerates autoregressive generation by having a cheap draft propose tokens that a target verifies in parallel. Frontier models increasingly ship a built-in Multi-Token-Prediction (MTP/NEXTN) draft head under the assumption that the draft is negligibly cheap. At million-token context this breaks: an MTP draft head typically runs full attention over the entire KV cache at every draft step, so its read grows linearly with context and comes to dominate the draft cost -- precisely where speculation is most valuable. The effect compounds with draft length (a deep native draft can turn net-negative, slower than no speculation) and sharpens under hybrid/linear-attention targets, where cheaper verification leaves the draft's full-attention read exposed. We apply a StreamingLLM-style sliding window plus attention sink to the draft's attention only (Windowed-MTP), leaving full-attention verification intact. It is training-free, drop-in, and lossless by construction: the full-attention target still decides every accepted token, so windowing changes only which tokens are proposed, never which are accepted. It bounds the draft's KV working set to a constant, dropping ~99% of KV entries at 1M. Across three architecture families (Qwen GDN-MoE 35B/122B and a Mamba2-hybrid NoPE 120B) at 1M context on a single GPU in SGLang, windowing cuts the per-decode-step cost over the shipping native MTP draft by +28% to +44%, an input-invariant margin that widens with context. Since per-token latency is this cost divided by acceptance length, at matched acceptance end-to-end decode latency improves by the same amount, and more where windowing also lifts acceptance, while preserving the target's verified output distribution. Finally, the unread draft KV -- 7.7-11% of total KV at 1M -- is reclaimed via a compact ring buffer at no acceptance or quality cost.

Using a diffusion model for parallel drafting is a promising approach for speculative decoding. By predicting tokens at multiple future positions in a single forward pass, diffusion drafters substantially reduce drafting latency. However, this shifts the bottleneck to verification: verifying a single sequence limits acceptance length, while verifying large draft trees incurs excessive target-model latency. We identify a key mismatch in existing draft-tree methods: existing diffusion-tree methods rank nodes by the marginal probability, ignoring that verification is prefix-conditioned. As a result, they may verify unreachable descendants of rejected prefixes, increasing latency with limited acceptance gains. To address this, we propose TAPS, a target-aware prefix selection method that turns diffusion marginals into path-conditioned acceptance estimates. TAPS then selects a compact prefix-closed subtree under a fixed verification budget, improving the acceptance-cost tradeoff rather than simply expanding the draft tree. Experiments across diverse datasets and model families demonstrate that TAPS achieves up to 7.9x lossless end-to-end speedup over vanilla autoregressive decoding, outperforming state-of-the-art DFlash and DDTree by 1.36x and 1.74x respectively. Our work is available at https://anonymous.4open.science/r/TAPS-EMNLP2026-53DD

Mechanical design and manufacturing workflows conventionally begin with conceptual design, followed by the creation of a computer-aided design (CAD) model and fabrication through material-extrusion (MEX) printing. This process requires converting CAD geometry into machine-readable G-code through slicing and path planning. While each step is well established, dependence on CAD modeling remains a major bottleneck: constructing object-specific 3D geometry is slow and poorly suited to rapid prototyping. Even minor design variations typically necessitate manual updates in CAD software, making iteration time-consuming and difficult to scale. To address this limitation, we introduce Image2Gcode, an end-to-end data-driven framework that bypasses the CAD stage and generates printer-ready G-code directly from images and part drawings. Instead of relying on an explicit 3D model, a hand-drawn or captured 2D image serves as the sole input. The framework first extracts slice-wise structural cues from the image and then employs a denoising diffusion probabilistic model (DDPM) over G-code sequences. Through iterative denoising, the model transforms Gaussian noise into executable print-move trajectories with corresponding extrusion parameters, establishing a direct mapping from visual input to native toolpaths. By producing structured G-code directly from 2D imagery, Image2Gcode eliminates the need for CAD or STL intermediates, lowering the entry barrier for additive manufacturing and accelerating the design-to-fabrication cycle. This approach supports on-demand prototyping from simple sketches or visual references and integrates with upstream 2D-to-3D reconstruction modules to enable an automated pipeline from concept to physical artifact. The result is a flexible, computationally efficient framework that advances accessibility in design iteration, repair workflows, and distributed manufacturing.

Machine-learning generative methods for material design are constructed by representing a given chemical structure, either a solid or a molecule, over appropriate atomic features, generally called structural descriptors. These must be fully descriptive of the system, must facilitate the training process and must be invertible, so that one can extract the atomic configurations corresponding to the output of the model. In general, this last requirement is not automatically satisfied by the most efficient structural descriptors, namely the representation is not directly invertible. Such drawback severely limits our freedom of choice in selecting the most appropriate descriptors for the problem, and thus our flexibility to construct generative models. In this work, we present a general optimization method capable of inverting any local many-body descriptor of the chemical environment, back to a cartesian representation. The algorithm is then implemented together with the bispectrum representation of the local structure and demonstrated for a number of molecules. The scheme presented here, thus, represents a general approach to the inversion of structural descriptors, enabling the construction of efficient structural generative models.

Computer-Aided Design (CAD) generative modeling is driving significant innovations across industrial applications. Recent works have shown remarkable progress in creating solid models from various inputs such as point clouds, meshes, and text descriptions. However, these methods fundamentally diverge from traditional industrial workflows that begin with 2D engineering drawings. The automatic generation of parametric CAD models from these 2D vector drawings remains underexplored despite being a critical step in engineering design. To address this gap, our key insight is to reframe CAD generation as a sequence-to-sequence learning problem where vector drawing primitives directly inform the generation of parametric CAD operations, preserving geometric precision and design intent throughout the transformation process. We propose Drawing2CAD, a framework with three key technical components: a network-friendly vector primitive representation that preserves precise geometric information, a dual-decoder transformer architecture that decouples command type and parameter generation while maintaining precise correspondence, and a soft target distribution loss function accommodating inherent flexibility in CAD parameters. To train and evaluate Drawing2CAD, we create CAD-VGDrawing, a dataset of paired engineering drawings and parametric CAD models, and conduct thorough experiments to demonstrate the effectiveness of our method. Code and dataset are available at https://github.com/lllssc/Drawing2CAD.

Closed drafting or "pick and pass" is a popular game mechanic where each round players select a card or other playable element from their hand and pass the rest to the next player. Games employing closed drafting make for great studies on memory and turn order due to their explicitly calculable memory of other players' hands. In this paper, we establish first-principle benchmarks for studying model-free reinforcement learning algorithms and their comparative ability to learn memory in a popular family of closed drafting games called "Sushi Go Party!", producing state-of-the-art results on this environment along the way. Furthermore, as Sushi Go Party! can be expressed as a set of closely-related games based on the set of cards in play, we quantify the generalizability of reinforcement learning algorithms trained on various sets of cards, establishing key trends between generalized performance and the set distance between the train and evaluation game configurations. Finally, we fit decision rules to interpret the strategy of the learned models and compare them to the ranking preferences of human players, finding intuitive common rules and intriguing new moves.

Recent text-to-CAD approaches have shown promising results by leveraging large language models, but they often struggle with maintaining structural consistency in complex designs and accurately grounding geometric parameters. To address these issues, we propose HierCAD, a hierarchical text-to-CAD framework that improves both structural reasoning and parameter prediction. HierCAD reformulates CAD generation as progressive reasoning by decomposing CAD construction trees into object-level procedural reasoning and part-level topology reasoning trajectories. To further improve generation fidelity, we introduce a unified Structure Alignment and Parameter Grounding (SAPG) learning strategy. Structure alignment aligns topology reasoning trajectories with their corresponding parametric CAD spans, while parameter grounding mitigates shortcut learning through structure-preserving parameter perturbations and ranking-based supervision. Experiments demonstrate that HierCAD outperforms prior state-of-the-art methods on both CAD sequence generation and reconstructed CAD model evaluation. Our code is available at https://github.com/Collab-Gen/HierCAD.

Speculative decoding accelerates large language model inference without changing the target distribution, but no single drafting structure performs best across real-world workloads. Autoregressive multi-token prediction (MTP) is a lightweight, stable proposal mechanism, whereas block-parallel diffusion amortizes drafting latency over much longer candidate sequences; the better choice depends strongly on the output distribution. We present AngelSpec, a unified training framework for MTP and block-parallel speculative decoding that addresses this heterogeneity at three levels. At the training level, rather than fitting one universal drafter to a uniform data mixture, we co-specialize structure and data: the MTP drafter is trained on diverse conversational data for high-entropy open-ended chat, and the block-diffusion drafter on code and mathematics data for longer predictable continuations. At the architecture level, we propose DFly, a block-diffusion framework combining a hybrid target-conditioning backbone with a predecessor-conditioned autoregressive head, improving target-feature utilization and intra-block dependency modeling while keeping generation parallel. At the inference level, both acceptance length and verification cost vary with domain, request, online load, and hardware, so DFly treats verification as a shared batch-level resource: it reallocates compute toward high-confidence prefixes across requests and combines expected utility with a profiled cost model to adapt verification depth online. Across the Hy3 series, DFly raises the average accepted length on Hy3-A21B by roughly 30% and attains the highest average throughput at every tested concurrency from 4 to 64, a 1.98-2.40x speedup over autoregressive decoding and 10.5-11.8% higher throughput than DFlash. We release AngelSpec to support training and extending these methods.

Speculative decoding accelerates LLM inference by having a small drafter propose tokens that a larger target model verifies in parallel. Recent diffusion-based parallel drafters such as DFlash predict the full B-token block in one forward pass, enabling deeper drafters and longer accepted blocks. However, existing multi-token drafter objectives often use fixed position-dependent weighting schedules, such as head-dependent weights or block-position decays, which do not adapt as the positions limiting acceptance change during training. To address this, we derive per-position training weights from a differentiable surrogate of expected accepted draft length, matching the weight of each position to its log-probability gradient contribution. The resulting loss, D-PACE (Dynamic Position-Aware Cross-Entropy), shifts training signal toward positions that currently limit acceptance as the drafter improves. Across six benchmarks, two Qwen3-4B draft depths, two decoding temperatures, and two additional target models, D-PACE consistently improves both wall-clock speedup and average emitted length, with 2.3\% measured training-time overhead and no changes to the drafter architecture or inference procedure.

This study introduces a human-in-the-loop pipeline that converts unscaled, hand-drawn floor plan sketches into semantically consistent 3D BIM models. The workflow leverages multimodal large language models (MLLMs) within a multi-agent framework, combining perceptual extraction, human feedback, schema validation, and automated BIM scripting. Initially, sketches are iteratively refined into a structured JSON layout of walls, doors, and windows. Later, these layouts are transformed into executable scripts that generate 3D BIM models. Experiments on ten diverse floor plans demonstrate strong convergence: openings (doors, windows) are captured with high reliability in the initial pass, while wall detection begins around 83% and achieves near-perfect alignment after a few feedback iterations. Across all categories, precision, recall, and F1 scores remain above 0.83, and geometric errors (RMSE, MAE) progressively decrease to zero through feedback corrections. This study demonstrates how MLLM-driven multi-agent reasoning can make BIM creation accessible to both experts and non-experts using only freehand sketches.

We consider multi-draft speculative sampling, where the proposal sequences are sampled independently from different draft models. At each step, a token-level draft selection scheme takes a list of valid tokens as input and produces an output token whose distribution matches that of the target model. Previous works have demonstrated that the optimal scheme (which maximizes the probability of accepting one of the input tokens) can be cast as a solution to a linear program. In this work we show that the optimal scheme can be decomposed into a two-step solution: in the first step an importance sampling (IS) type scheme is used to select one intermediate token; in the second step (single-draft) speculative sampling is applied to generate the output token. For the case of two identical draft models we further 1) establish a necessary and sufficient condition on the distributions of the target and draft models for the acceptance probability to equal one and 2) provide an explicit expression for the optimal acceptance probability. Our theoretical analysis also motives a new class of token-level selection scheme based on weighted importance sampling. Our experimental results demonstrate consistent improvements in the achievable block efficiency and token rates over baseline schemes in a number of scenarios.

Computer-Aided Design (CAD) is a foundational component of industrial prototyping, where models are defined not by raw coordinates but by construction sequences such as sketches and extrusions. This sequential structure enables both efficient prototype initialization and subsequent editing. Text-guided CAD prototyping, which unifies Text-to-CAD generation and CAD editing, has the potential to streamline the entire design pipeline. However, prior work has not explored this setting, largely because standard large language model (LLM) tokenizers decompose CAD sequences into natural-language word pieces, failing to capture primitive-level CAD semantics and hindering attention modules from modeling geometric structure. We conjecture that a multimodal tokenization strategy, aligned with CAD's primitive and structural nature, can provide more effective representations. To this end, we propose CAD-Tokenizer, a framework that represents CAD data with modality-specific tokens using a sequence-based VQ-VAE with primitive-level pooling and constrained decoding. This design produces compact, primitive-aware representations that align with CAD's structural nature. Applied to unified text-guided CAD prototyping, CAD-Tokenizer significantly improves instruction following and generation quality, achieving better quantitative and qualitative performance over both general-purpose LLMs and task-specific baselines.

We present a novel inference scheme, self-speculative decoding, for accelerating Large Language Models (LLMs) without the need for an auxiliary model. This approach is characterized by a two-stage process: drafting and verification. The drafting stage generates draft tokens at a slightly lower quality but more quickly, which is achieved by selectively skipping certain intermediate layers during drafting Subsequently, the verification stage employs the original LLM to validate those draft output tokens in one forward pass. This process ensures the final output remains identical to that produced by the unaltered LLM, thereby maintaining output quality. The proposed method requires no additional neural network training and no extra memory footprint, making it a plug-and-play and cost-effective solution for inference acceleration. Benchmarks with LLaMA-2 and its fine-tuned models demonstrated a speedup up to 1.73times.

Speculative decoding accelerates generation without changing its output, but on vision-language models (VLMs) a self-reinforcing cycle holds it back. Because an autoregressive drafter pays a sequential pass for each drafted token, it must stay small and can ill afford to attend to the image at each pass. Prior work therefore compresses or hides the image, leaving the drafter weakest on the text the image determines. We present GLANCE, a one-pass block drafter that breaks this cycle on an unmodified VLM target. Its block-diffusion head drafts a whole block in one forward pass over the target's already fused vision-language states, reading the multimodal context once, however deep the draft. The target verifies a wide candidate tree in one pass and commits exactly its greedy output. In one production engine at a fixed round budget, GLANCE decodes up to 3.05 times faster than autoregressive decoding and outpaces the production EAGLE3-VL head on average and by about 11% on grounded tasks. An entropy law explains when drafting pays, predicting the longest accepted blocks on grounded tasks, where the target's next-token entropy is lowest. Our code is available at https://github.com/js-lee-AI/GLANCE.

Drafting in Magic the Gathering is a sub-game within a larger trading card game, where several players progressively build decks by picking cards from a common pool. Drafting poses an interesting problem for game and AI research due to its large search space, mechanical complexity, multiplayer nature, and hidden information. Despite this, drafting remains understudied, in part due to a lack of high-quality, public datasets. To rectify this problem, we present a dataset of over 100,000 simulated, anonymized human drafts collected from Draftsim.com. We also propose four diverse strategies for drafting agents, including a primitive heuristic agent, an expert-tuned complex heuristic agent, a Naive Bayes agent, and a deep neural network agent. We benchmark their ability to emulate human drafting, and show that the deep neural network agent outperforms other agents, while the Naive Bayes and expert-tuned agents outperform simple heuristics. We analyze the accuracy of AI agents across the timeline of a draft, and describe unique strengths and weaknesses for each approach. This work helps to identify next steps in the creation of humanlike drafting agents, and can serve as a benchmark for the next generation of drafting bots.

Parametric Computer-Aided Design (CAD) is central to contemporary mechanical design. However, it encounters challenges in achieving precise parametric sketch modeling and lacks practical evaluation metrics suitable for mechanical design. We harness the capabilities of pre-trained foundation models, renowned for their successes in natural language processing and computer vision, to develop generative models specifically for CAD. These models are adept at understanding complex geometries and design reasoning, a crucial advancement in CAD technology. In this paper, we propose CadVLM, an end-to-end vision language model for CAD generation. Our approach involves adapting pre-trained foundation models to manipulate engineering sketches effectively, integrating both sketch primitive sequences and sketch images. Extensive experiments demonstrate superior performance on multiple CAD sketch generation tasks such as CAD autocompletion, CAD autoconstraint, and image conditional generation. To our knowledge, this is the first instance of a multimodal Large Language Model (LLM) being successfully applied to parametric CAD generation, representing a pioneering step in the field of computer-aided mechanical design.

Speculative decoding accelerates LLM inference by drafting multiple tokens and verifying them in parallel with the target model. However, its practical speedup is constrained by the trade-off between draft quality and drafting cost: autoregressive drafters model causal dependencies among draft tokens but incur sequential overhead, while parallel drafters reduce drafting cost but weaken intra-block dependency modeling. In this paper, we propose Domino, a speculative decoding framework that decouples causal dependency modeling from expensive autoregressive draft execution. Domino first uses a parallel draft backbone to produce preliminary draft distributions for the entire block, and then applies a lightweight Domino head to refine them with prefix-dependent causal information. To stabilize teacher-forced causal encoding, we further introduce a base-anchored training curriculum that first strengthens the parallel backbone and then gradually shifts optimization toward the causally corrected final distribution. Experiments on Qwen3 models show that Domino achieves up to \(5.49\times\) end-to-end speedup under the Transformers backend and up to \(5.8\times\) throughput speedup under SGLang serving.

Drafting an answer allows a reasoning model to reconsider each decision in the context of the others. Yet repeated diffusion denoising does not ensure that individually plausible token updates form a better answer together. We introduce Draft Refinement Language Models (DRLMs), which use a single denoiser to propose parallel revisions and evaluate a candidate draft. We train the denoiser to reconstruct every token from uniformly corrupted drafts, teaching both preservation and repair. Its predictions specify revisions directly, without a diffusion reverse transition. Evaluation requires a different use of these predictions: confidence in an existing token reflects both contextual support and evidence from observing the token itself. Using the known corruption process, we correct for this self-token evidence to estimate how well each token is supported by the prompt and the remaining draft. Aggregating these estimates yields a cavity energy computed in one forward pass, without an additional scoring model. Each round proposes a revision, reads the completed candidate in its revised context, and retains it only if its energy is lower. Across Countdown, Sudoku-Extreme, and Maze-Hard, our method outperforms autoregressive and discrete diffusion baselines. With 6M parameters, DRLM reaches 44.4% on Countdown-5 and 93.9% on Sudoku-Extreme. The results establish complete-draft parallel refinement as an effective alternative to reverse diffusion for complex reasoning.

Speculative decoding is an effective and lossless method for Large Language Model (LLM) inference acceleration. It employs a smaller model to generate a draft token sequence, which is then verified by the original base model. In multi-GPU systems, inference latency can be further reduced through tensor parallelism (TP), while the optimal TP size of the draft model is typically smaller than that of the base model, leading to GPU idling during the drafting stage. To solve this problem, we propose EasySpec, a layer-parallel speculation strategy that optimizes the efficiency of multi-GPU utilization.EasySpec breaks the sequential execution order of layers in the drafting model, enabling multi-layer parallelization across devices, albeit with some induced approximation errors. After each drafting-and-verification iteration, the draft model's key-value (KV) cache is calibrated in a single forward pass, preventing long-term error accumulation at minimal additional latency. We evaluated EasySpec on several mainstream open-source LLMs, using smaller versions of models from the same series as drafters. The results demonstrate that EasySpec can achieve a peak speedup of 4.17x compared to vanilla decoding, while preserving the original distribution of the base LLMs. Specifically, the drafting stage can be accelerated by up to 1.62x with a maximum accuracy drop of only 7%, requiring no training or fine-tuning on the draft models.

Speculative decoding accelerates LLM inference by drafting future tokens with a small model, but drafter models degrade sharply under template perturbation and long-context inputs. We identify a previously-unreported phenomenon we call attention drift: as the drafter generates successive tokens within a speculation chain, attention progressively moves from the prompt onto its own recently-generated tokens. We observe this across both EAGLE3 drafters and MTP heads, suggesting drift is a property of drafter designs. We trace this to the un-normalized residual path between chain steps: the drafter's hidden state magnitude grows monotonically with chain depth, which exhibits dynamics consistent with additional pre-norm transformer layers stacked on the target rather than as a standalone autoregressive predictor. In order to limit the growth, we propose two architectural changes: Post-norm on the drafter hidden states and per-hidden-state RMSNorm after capturing target hidden states. Our interventions improve acceptance length over the current leading model, pre-norm EAGLE3, by up to 2times under template perturbation, 1.18times on long-context tasks, and 1.10times on seven standard benchmarks spanning multi-turn chat, math, and coding. Our changes also allow shorter train-time-test depths to generalize over longer drafting sequences.

The field of natural language processing (NLP) has witnessed significant progress in recent years, with a notable focus on improving large language models' (LLM) performance through innovative prompting techniques. Among these, prompt engineering coupled with structures has emerged as a promising paradigm, with designs such as Chain-of-Thought, Tree of Thoughts, or Graph of Thoughts, in which the overall LLM reasoning is guided by a structure such as a graph. As illustrated with numerous examples, this paradigm significantly enhances the LLM's capability to solve numerous tasks, ranging from logical or mathematical reasoning to planning or creative writing. To facilitate the understanding of this growing field and pave the way for future developments, we devise a general blueprint for effective and efficient LLM reasoning schemes. For this, we conduct an in-depth analysis of the prompt execution pipeline, clarifying and clearly defining different concepts. We then build the first taxonomy of structure-enhanced LLM reasoning schemes. We focus on identifying fundamental classes of harnessed structures, and we analyze the representations of these structures, algorithms executed with these structures, and many others. We refer to these structures as reasoning topologies, because their representation becomes to a degree spatial, as they are contained within the LLM context. Our study compares existing prompting schemes using the proposed taxonomy, discussing how certain design choices lead to different patterns in performance and cost. We also outline theoretical underpinnings, relationships between prompting and others parts of the LLM ecosystem such as knowledge bases, and the associated research challenges. Our work will help to advance future prompt engineering techniques.

The immense model sizes of large language models (LLMs) challenge deployment on memory-limited consumer GPUs. Although model compression and parameter offloading are common strategies to address memory limitations, compression can degrade quality, and offloading maintains quality but suffers from slow inference. Speculative decoding presents a promising avenue to accelerate parameter offloading, utilizing a fast draft model to propose multiple draft tokens, which are then verified by the target LLM in parallel with a single forward pass. This method reduces the time-consuming data transfers in forward passes that involve offloaded weight transfers. Existing methods often rely on pretrained weights of the same family, but require additional training to align with custom-trained models. Moreover, approaches that involve draft model training usually yield only modest speedups. This limitation arises from insufficient alignment with the target model, preventing higher token acceptance lengths. To address these challenges and achieve greater speedups, we propose SubSpec, a plug-and-play method to accelerate parameter offloading that is lossless and training-free. SubSpec constructs a highly aligned draft model by generating low-bit quantized substitute layers from offloaded target LLM portions. Additionally, our method shares the remaining GPU-resident layers and the KV-Cache, further reducing memory overhead and enhance alignment. SubSpec achieves a high average acceptance length, delivering 9.1x speedup for Qwen2.5 7B on MT-Bench (8GB VRAM limit) and an average of 12.5x speedup for Qwen2.5 32B on popular generation benchmarks (24GB VRAM limit).

Structural fidelity is essential to scientific methodology diagrams. To communicate research logic, these diagrams must faithfully render components, directional relations, and textual annotations. Since a single error, such as a reversed arrow or an unreadable equation, can invalidate the entire figure, structural fidelity is inherently conjunctive: correctness on one axis cannot compensate for failure on another. Current open-source models fail to satisfy this criterion. Supervised fine-tuning (SFT) learns plausible layouts but cannot reliably ensure structural correctness, while scalar reward-based post-training obscures which structural dimension has failed. To address this, we introduce SciForma, a framework for the structure faithful generation of scientific methodology diagrams. Specifically, SciForma decomposes diagram quality into three structural axes: Component, Arrow, and Text, guided by a structural inventory. Built on this foundation, we curate SciFormaData-700K for structured training and SciFormaBench-2K for logic-verified evaluation. To close the gap left by SFT, we develop Multi-Dimensional Conjunctive Preference Optimization (M-DPO), which enforces simultaneous correctness across all axes and adaptively routes gradients to the most deficient dimension in post-training. The same structural inventory also enables iterative editing at inference time to correct residual errors. This combination allows SciForma-9B to exceed all open-source baselines and GPT-Image-1.5 on both SciFormaBench-2K and AIBench, bringing open scientific diagram generation close to proprietary-level structural fidelity. Our code and data will be available at: https://github.com/microsoft/SciForma.

The creation of 3D assets with explicit, editable part structures is crucial for advancing interactive applications, yet most generative methods produce only monolithic shapes, limiting their utility. We introduce OmniPart, a novel framework for part-aware 3D object generation designed to achieve high semantic decoupling among components while maintaining robust structural cohesion. OmniPart uniquely decouples this complex task into two synergistic stages: (1) an autoregressive structure planning module generates a controllable, variable-length sequence of 3D part bounding boxes, critically guided by flexible 2D part masks that allow for intuitive control over part decomposition without requiring direct correspondences or semantic labels; and (2) a spatially-conditioned rectified flow model, efficiently adapted from a pre-trained holistic 3D generator, synthesizes all 3D parts simultaneously and consistently within the planned layout. Our approach supports user-defined part granularity, precise localization, and enables diverse downstream applications. Extensive experiments demonstrate that OmniPart achieves state-of-the-art performance, paving the way for more interpretable, editable, and versatile 3D content.

Autoregressive language models demonstrate excellent performance in various scenarios. However, the inference efficiency is limited by its one-step-one-word generation mode, which has become a pressing problem recently as the models become increasingly larger. Speculative decoding employs a "draft and then verify" mechanism to allow multiple tokens to be generated in one step, realizing lossless acceleration. Existing methods mainly adopt fixed heuristic draft structures, which fail to adapt to different situations to maximize the acceptance length during verification. To alleviate this dilemma, we proposed OPT-Tree, an algorithm to construct adaptive and scalable draft trees. It searches the optimal tree structure that maximizes the mathematical expectation of the acceptance length in each decoding step. Experimental results reveal that OPT-Tree outperforms the existing draft structures and achieves a speed-up ratio of up to 3.2 compared with autoregressive decoding. If the draft model is powerful enough and the node budget is sufficient, it can generate more than ten tokens in a single step. Our code is available at https://github.com/Jikai0Wang/OPT-Tree.

We consider a family of linear systems A_mu alpha=C with system matrix A_mu depending on a parameter mu and for simplicity parameter-independent right-hand side C. These linear systems typically result from the finite-dimensional approximation of a parameter-dependent boundary-value problem. We derive a procedure based on the Empirical Interpolation Method to obtain a separated representation of the system matrix in the form A_muapproxsum_{m}beta_m(mu)A_{mu_m} for some selected values of the parameter. Such a separated representation is in particular useful in the Reduced Basis Method. The procedure is called nonintrusive since it only requires to access the matrices A_{mu_m}. As such, it offers a crucial advantage over existing approaches that instead derive separated representations requiring to enter the code at the level of assembly. Numerical examples illustrate the performance of our new procedure on a simple one-dimensional boundary-value problem and on three-dimensional acoustic scattering problems solved by a boundary element method.

Speculative decoding accelerates memory-bound LLM inference without quality degradation by using a fast drafter to propose multiple candidate tokens and the target model to verify them in parallel. However, conventional sequential speculative decoding suffers from mutual waiting between drafting and verification, and repeated exchange of intermediate states further increases memory access overhead. Parallel speculative decoding addresses this limitation by performing drafting and verification within a single target forward pass, allowing future drafts to be prepared while current candidates are being verified. Although effective at small batch sizes, existing parallel speculative decoding methods either require costly continual pretraining with quality degradation or suffer from low acceptance rates. More importantly, this paradigm inherently suffers from uncertainty in both the bonus token and the accepted length, leading to draft verification mismatch and causing throughput gains to collapse at large batch sizes. To address these limitations, we introduce FlexDraft, a lossless speculative decoding framework that flexibly adapts to varying batch sizes through three key designs. (1) Attention Tuning enables block diffusion drafting by tuning only the attention projectors of the final few layers on mask tokens, while keeping the autoregressive path frozen to preserve the target distribution and produce high quality drafts with minimal trainable parameters. (2) Bonus-guided Calibration uses a lightweight MLP conditioned on the resolved bonus token to calibrate draft logits, mitigating draft verification mismatch caused by bonus token uncertainty. (3) Flex Decoding dynamically switches between parallel draft and verify at small batch sizes and sequential draft then verify at large batch sizes, and adjusts verification length based on draft confidence to eliminate redundant computation.

Despite the power of Large Language Models (LLMs) like GPT-4, they still struggle with tasks that require generating complex, structured outputs. In this study, we assess the capability of Current LLMs in generating complex structured data and propose a structure-aware fine-tuning approach as a solution to improve this ability. To perform a comprehensive evaluation, we propose Struc-Bench, include five representative LLMs (i.e., GPT-NeoX 20B, GPT-3.5, GPT-4, and Vicuna) and evaluate them on our carefully constructed datasets spanning raw text, HTML, and LaTeX tables. Based on our analysis of current model performance, we identify specific common formatting errors and areas of potential improvement. To address complex formatting requirements, we utilize FormatCoT (Chain-of-Thought) to generate format instructions from target outputs. Our experiments show that our structure-aware fine-tuning method, when applied to LLaMA-7B, significantly improves adherence to natural language constraints, outperforming other evaluated LLMs. Based on these results, we present an ability map of model capabilities from six dimensions (i.e., coverage, formatting, reasoning, comprehension, pragmatics, and hallucination). This map highlights the weaknesses of LLMs in handling complex structured outputs and suggests promising directions for future work. Our code and models can be found at https://github.com/gersteinlab/Struc-Bench.

In this paper, we introduce a simple training-free technique to improve the performance of drafter-based speculative decoding (SpD) methods that incorporates language modeling head (LM head) during drafting process. A drafter-based speculative decoding leverages one or more smaller language models, a.k.a. drafters or draft models, to sample a draft sequence or tree consisting of multiple tokens, followed by verification by a base LLM, a target model, accepting a subset as its valid generation. As it is usually considered that the speculative decoding requires one-to-one mapping between vocabularies of the target model and the draft model, it has been natural to share the vocabulary between them, or even share the LM head as in EAGLE or Medusa. We first identify that this draft token sampling scheme inherently contains an unnecessary inference overhead in drafting, especially for some target LLMs with very large vocabularies. Then, we propose a simple technique, VocabTrim, to mitigate the drafting overhead to improve the generation speed in memory-bound environment. VocabTrim reconstructs the drafter LM head to contain only a limited set of tokens, selected by the most frequently sampled from the vocabulary of the target model. While limiting the vocabulary in drafting slightly degrades the acceptance rate, it significantly reduces the drafting latency in memory-bound process which is often the case on edge devices, resulting in higher memory-bound speed up (MBSU). We show that our method can boost the memory-bound speed-up for Llama-3 models on Spec-Bench, specifically by 16% for Llama-3.2-3B-Instruct.

Speculative decoding accelerates autoregressive LLMs by having a lightweight drafter propose tokens that the target model verifies in parallel. Diffusion-based drafters further reduce drafting latency by proposing multiple tokens at once. However, these tokens are predicted independently, so a single early error causes prefix verification to discard the rest of the draft, even when it contains useful downstream predictions. We introduce DEdit, a diffusion-based drafter that can not only draft by conventional parallel unmasking but also iteratively edit its draft through token-to-token predictions. Through editing, later predictions can serve as bidirectional context for repairing earlier errors and extending the accepted prefix. To teach the model to repair errors while preserving correct predictions, we propose ProposalMix, a training scheme that mixes draft predictions with ground-truth tokens based on first-pass confidence during training. Across seven benchmarks on Qwen3-4B and Qwen3-8B, DEdit achieves the highest macro-average token acceptance and speedup among the evaluated drafters, reaching macro-average speedups of 5.72times and 5.97times over autoregressive generation under greedy decoding, respectively. Further analysis shows that acceptance improves with more editing passes and wider drafting windows, and that ProposalMix halves harmful edits that shorten the accepted prefix. Moreover, restricting the editor to causal attention lowers acceptance, especially on highly predictable outputs, indicating that future context is a key source of these gains.

Computer-aided design (CAD) is vital to modern manufacturing, yet model creation remains labor-intensive and expertise-heavy. To enable non-experts to translate intuitive design intent into manufacturable artifacts, recent large language models-based text-to-CAD efforts focus on command sequences or script-based formats like CadQuery. However, these formats are kernel-dependent and lack universality for manufacturing. In contrast, the Standard for the Exchange of Product Data (STEP, ISO 10303) file is a widely adopted, neutral boundary representation (B-rep) format directly compatible with manufacturing, but its graph-structured, cross-referenced nature poses unique challenges for auto-regressive LLMs. To address this, we curate a dataset of ~40K STEP-caption pairs and introduce novel preprocessing tailored for the graph-structured format of STEP, including a depth-first search-based reserialization that linearizes cross-references while preserving locality and chain-of-thought(CoT)-style structural annotations that guide global coherence. We integrate retrieval-augmented generation to ground predictions in relevant examples for supervised fine-tuning, and refine generation quality through reinforcement learning with a specific Chamfer Distance-based geometric reward. Experiments demonstrate consistent gains of our STEP-LLM in geometric fidelity over the Text2CAD baseline, with improvements arising from multiple stages of our framework: the RAG module substantially enhances completeness and renderability, the DFS-based reserialization strengthens overall accuracy, and the RL further reduces geometric discrepancy. Both metrics and visual comparisons confirm that STEP-LLM generates shapes with higher fidelity than Text2CAD. These results show the feasibility of LLM-driven STEP model generation from natural language, showing its potential to democratize CAD design for manufacturing.

Large language model agents solve tasks through long sequences of tool calls, and the prevailing design has a single strong model generate every step, although many steps are routine enough for a much smaller model. Existing ways of sharing this work keep the strong model as the generator: routers and collaborative agents decide which model handles each query or step, and speculative methods check a small model's drafts one step at a time, usually against the strong model's own action. We introduce SpecAgent, a collaboration protocol that turns the strong model from the author of each step into a reviewer of steps drafted by a weak model. The weak model executes read-only tool calls as it drafts, so that every step is grounded in real observations, and holds the first action that would modify the environment. The strong model then verifies the drafted segment in a single prefill pass, commits the longest prefix it judges semantically valid, and repairs the first rejected step. Because verification replaces autoregressive decoding with parallel prefill, the strong model decodes only short verdicts and occasional repairs rather than every step. On τ^2-Bench, SpecAgent comes within one point of the strong model's success rate while roughly halving memory traffic and wall time, and on AutomationBench and VitaBench it recovers 44-75% of the quality gap while lowering both. In an edge-cloud deployment on MCP-Atlas with three cloud models, it closes 53-75% of the weak-strong quality gap while the strong model generates at most half as many tokens. These results suggest that a strong model need not author every step of an agent: reviewing grounded drafts retains most of its quality while cutting both latency and memory traffic.

We revisit the well-studied problem of approximating a matrix product, A^TB, based on small space sketches S(A) and S(B) of A in R^{n times d} and Bin R^{n times m}. We are interested in the setting where the sketches must be computed independently of each other, except for the use of a shared random seed. We prove that, when A and B are sparse, methods based on coordinated random sampling can outperform classical linear sketching approaches, like Johnson-Lindenstrauss Projection or CountSketch. For example, to obtain Frobenius norm error epsilon|A|_F|B|_F, coordinated sampling requires sketches of size O(s/epsilon^2) when A and B have at most s leq d,m non-zeros per row. In contrast, linear sketching leads to sketches of size O(d/epsilon^2) and O(m/epsilon^2) for A and B. We empirically evaluate our approach on two applications: 1) distributed linear regression in databases, a problem motivated by tasks like dataset discovery and augmentation, and 2) approximating attention matrices in transformer-based language models. In both cases, our sampling algorithms yield an order of magnitude improvement over linear sketching.

Sketch design concepts are recurring patterns found in parametric CAD sketches. Though rarely explicitly formalized by the CAD designers, these concepts are implicitly used in design for modularity and regularity. In this paper, we propose a learning based approach that discovers the modular concepts by induction over raw sketches. We propose the dual implicit-explicit representation of concept structures that allows implicit detection and explicit generation, and the separation of structure generation and parameter instantiation for parameterized concept generation, to learn modular concepts by end-to-end training. We demonstrate the design concept learning on a large scale CAD sketch dataset and show its applications for design intent interpretation and auto-completion.

Speculative decoding (SD) addresses the high inference costs of LLMs by having lightweight drafters generate candidates for large verifiers to validate in parallel. Existing draft-verify methods use binary decisions: accept or fully recompute. Yet we find that many rejected tokens can be verified correctly by a slim submodel derived from the full verifier via intra-model routing, instead of the full verifier. This motivates our slim-verifier to handle tokens requiring moderate verification resources, reducing expensive large-model calls. We propose Verification via Intra-Model Routing for Speculative Decoding (VIA-SD), a multi-tier framework using a routed slim-verifier. Draft tokens are processed hierarchically: direct acceptance for high-confidence cases, slim-verifier regeneration for medium-confidence cases, and full-model verification for uncertain cases. Across four representative tasks and multiple model families, VIA-SD reduces rejection rates by 0.10-0.22 and delivers 10-20% speedups over strong SD baselines, while achieving 2.5-3x acceleration over non-drafting decoding. Moreover, VIA-SD is compatible with existing SD frameworks without modifying their training procedures. Our results suggest multi-tier SD as a general paradigm for scalable and efficient LLM inference. Project page: https://zju-xyc.github.io/VIA-SD-Project-Page/

Autoregressive (AR) language models generate tokens sequentially, so generating long outputs is costly. Speculative decoding mitigates this by using a lightweight drafter to propose multiple tokens for the target AR model to verify in parallel, while a diffusion-based drafter can produce an entire draft block in one forward pass. In models with AR and diffusion modes, one network both drafts and verifies, but drafting still waits for verification, so the standard schedule needs two sequential model calls per iteration. Existing one-call schedules avoid the wait but incur input size quadratic in the speculative width. Motivated by this efficiency bottleneck, we introduce Packed-SS, a self-speculative decoding schedule that verifies and drafts in a single model call with input size linear in the speculative width, while preserving the target model's distribution. The key idea is to let the diffusion drafter run one call ahead: while verifying the current draft, the model simultaneously constructs the next draft from an older verified prefix and keeps its unresolved suffix for the next iteration. Under a mild monotonicity assumption on the drafter, we further show that Packed-SS requires no more model calls than the standard two-call decoding in the greedy setting. Experiments on Nemotron 3B/8B and SetDLM 1.7B show higher throughput and lower mean wall time than both baselines under greedy decoding.

Speculative decoding accelerates autoregressive generation by letting a lightweight draft model propose future tokens that a larger target model then verifies in parallel. In practice, however, draft models are usually trained on broad generic corpora, which leaves it unclear how much speculative decoding quality depends on the draft training distribution. We study this question with lightweight HASS and EAGLE-2 drafters trained on MathInstruct, ShareGPT, and mixed-data variants, evaluated on MT-Bench, GSM8K, MATH-500, and SVAMP. Measured by acceptance length, task-specific training yields clear specialization: MathInstruct-trained drafts are strongest on reasoning benchmarks, while ShareGPT-trained drafts are strongest on MT-Bench. Mixed-data training improves robustness, but larger mixtures do not dominate across decoding temperatures. We also study how to combine specialized drafters at inference time. Naive checkpoint averaging performs poorly, whereas confidence-based routing improves over single-domain drafts and merged-tree verification yields the highest acceptance length overall for both backbones. Finally, confidence is a more useful routing signal than entropy: rejected tokens tend to have higher entropy, but confidence produces much clearer benchmark-level routing decisions. These results show that speculative decoding quality depends not only on draft architecture, but also on the match between draft training data and downstream workload, and that specialized drafters are better combined at inference time than in weight space.

Current 3D generation methods lack explicit local control: geometric adherence is often defined by a global control strength, and appearance cannot be specified locally. We present SpaceFlow, a training-free pipeline for locally controllable 3D generation from text descriptions and a collection of geometric primitives. Each primitive serves as a proxy for an object part and is assigned a local control level, enabling users to specify whether regions should strictly follow the input shape or allow generative completion. During structure generation, we enforce these spatial constraints within the generative flow process. For appearance synthesis, the generated structure is segmented and matched to the primitives. Each generated part is conditioned only on its assigned text or image cue, thereby limiting cross-part leakage. Regional geometry metrics demonstrate that SpaceFlow preserves the specified geometry in high-control regions and enables plausible shape variation in low-control areas. A user study further indicates that the resulting balance between geometric fidelity and generative freedom remains competitive in overall quality. When evaluating appearance on fixed geometry, text-conditioned routing achieves state-of-the-art prompt faithfulness and color/material accuracy. Qualitative results additionally show localized routing of image cues. The project page is available at SpaceFlow3D.github.io.

Automated floor plan generation has recently gained momentum with several methods that have been proposed. The CVAAD Floor Plan Auto-Completion workshop challenge introduced MSD, a new dataset that includes existing structural walls of the building as an additional input constraint. This technical report presents an approach for extending a recent work, HouseDiffusion (arXiv:2211.13287 [cs.CV]), to the MSD dataset. The adaption involves modifying the model's transformer layers to condition on a set of wall lines. The report introduces a pre-processing pipeline to extract wall lines from the binary mask of the building structure provided as input. Additionally, it was found that a data processing procedure that simplifies all room polygons to rectangles leads to better performance. This indicates that future work should explore better representations of variable-length polygons in diffusion models. The code will be made available at a later date.

Speculative Decoding (SD) is a popular lossless technique for accelerating the inference of Large Language Models (LLMs). We show that the decoding speed of SD frameworks with static draft structures can be significantly improved by incorporating context-aware adaptive draft structures. However, current studies on adaptive draft structures are limited by their performance, modeling approaches, and applicability. In this paper, we introduce AdaEAGLE, the first SD framework that explicitly models adaptive draft structures. AdaEAGLE leverages the Lightweight Draft Length Predictor (LDLP) module to explicitly predict the optimal number of draft tokens during inference to guide the draft model. It achieves comparable speedup results without manual thresholds and allows for deeper, more specialized optimizations. Moreover, together with threshold-based strategies, AdaEAGLE achieves a 1.62times speedup over the vanilla AR decoding and outperforms fixed-length SotA baseline while maintaining output quality.

High-fidelity 3D MRI synthesis requires both globally coherent anatomy and fine-grained voxel-level detail. Although latent diffusion makes volumetric generation tractable, its image autoencoder introduces a reconstruction bottleneck that can limit the fine detail recoverable in the final volume. We present VoxStruct3D, a voxel-space flow-matching framework that directly models full-resolution MRI volumes using a clean-data prediction objective. Its Volumetric Voxel Generator (VVG) combines factorized 3D patch embedding with overlapping upsampling, time-modulated residual refinement, and skip fusion, enabling neighboring tokens to jointly reconstruct shared voxel regions and suppress patch-boundary artifacts. To complement direct voxel-space modeling with an explicit anatomical prior, we further introduce a Structure-First, Image-Follows (SFIF) strategy. A frozen pretrained 3D medical encoder and a StructVAE extract compact structure tokens that preserve dominant anatomy, while a structure-leading schedule keeps their trajectory ahead of the image trajectory. Patch-Aligned RoPE spatially aligns the unequal token grids, and asymmetric attention enforces one-way guidance from structure to image. Experiments on pathological and healthy T1-weighted brain MRI datasets show that VoxStruct3D achieves the strongest overall performance across feature-distribution alignment, sample diversity, and perceptual quality, producing anatomically coherent and visually realistic volumes.

Agents driven by large language models are increasingly deployed on long-horizon tasks, where they use tools and modify real workspaces. How well they perform depends as much on the harness around the model as on the model itself. Existing benchmarks measure downstream task success under a fixed harness, leaving harness engineering itself unexplored. We propose Doc2Harness, a two-stage benchmark that evaluates long-horizon harness engineering directly. In Stage 1, a build model operating inside a fixed builder harness receives an interface-only contract skeleton and a development document that consolidates behavior across twelve frontier harnesses, and then constructs a complete candidate harness in an isolated container. In Stage 2, the frozen candidate harness runs in containers separate from the construction environment, one per test case, and is driven end to end by a scripted mock model. We score each test case using four observable channels, namely the requests sent to the model, the files on disk, the process exit code, and the command output; positive controls rule out vacuous passes. Across nineteen frontier models, each evaluated with three independent builds on 328 test cases, GPT-6 Astra achieves the highest pass rate at 53.05%, while the weakest model reaches 27.44%, a gap of roughly twenty-six percentage points. Even the strongest model fails nearly half of the test cases, and failures cluster around how cross-cutting functionality is split across modules. To our knowledge, Doc2Harness provides the first deterministic benchmark for measuring long-horizon harness engineering.

Boundary representation (B-Rep) generation is a fundamental task in computer-aided design, yet the direct synthesis of high-fidelity and structurally valid B-Reps remains a major challenge. Existing deep generative methods suffer from two forms of brittleness: representation brittleness, caused by padding noise and feature contamination in the latent space, and generation brittleness, stemming from sequential error propagation and a train-inference mismatch due to non-differentiable validity enforcement. We propose HiFi-BRep, a novel framework that addresses these limitations through two synergistic contributions. First, a topology-aware encoder constructs a high-fidelity latent representation by eliminating padding via learnable queries and preventing feature contamination with topology-guided attention. Second, a single-stage decoder jointly predicts geometry and topology in parallel, embedding core manifold constraints as a differentiable learning objective. This design ensures mutual guidance between geometry and topology while avoiding cascaded errors. Extensive experiments show that HiFi-BRep significantly outperforms state-of-the-art methods in both structural validity and geometric fidelity, providing a robust solution for high-quality B-Rep synthesis. Code and models are publicly available at https://github.com/1nnoh/HiFi-BRep.

Parallel speculative drafting generates multiple candidates in one backbone pass, but independent token selection can produce inconsistent continuations that shorten the accepted prefix. Existing methods mostly leave conditional decoding to a lightweight module after the backbone, which limits the flow of predecessor information to successors. Our analysis of DFlash shows that early positions already form recoverable predictions in shallow layers, and that accurate adjacent predecessors help successors more when they enter earlier. We therefore propose DSpine, a drafter with causal conditioning injection throughout the backbone: at every layer, gated adjacent injection writes each predecessor's predicted feature into its successor, so the causal conditioning chain unfolds over network depth while all positions update in parallel. A unified transfer space built from the target model's output embeddings unifies layer-wise injection with predecessor-conditioned decoding, and layer-wise output-embedding supervision promotes the formation of predicted features in shallow layers. Fused kernels and a transition cache execute both efficiently in parallel within SGLang. Across seven math, code, and chat benchmarks, DSpine achieves the longest acceptance length at both temperatures on Qwen3-4B and Qwen3-8B. At temperature zero on Qwen3-8B, it raises the seven-benchmark mean from DFlash's 3.77 to 4.82 (+27.8%); in SGLang serving tests, it delivers 23.3% higher throughput than DFlash on average.

Native 3D generative models have achieved remarkable fidelity and speed, yet they suffer from a critical limitation: inability to prescribe precise structural articulations, where precise structural control within the native 3D space remains underexplored. This paper proposes SK-Adapter, a simple and yet highly efficient and effective framework that unlocks precise skeletal manipulation for native 3D generation. Moving beyond text or image prompts, which can be ambiguous for precise structure, we treat the 3D skeleton as a first-class control signal. SK-Adapter is a lightweight structural adapter network that encodes joint coordinates and topology into learnable tokens, which are injected into the frozen 3D generation backbone via cross-attention. This smart design allows the model to not only effectively "attend" to specific 3D structural constraints but also preserve its original generative priors. To bridge the data gap, we contribute Objaverse-TMS dataset, a large-scale dataset of 24k text-mesh-skeleton pairs. Extensive experiments confirm that our method achieves robust structural control while preserving the geometry and texture quality of the foundation model, significantly outperforming existing baselines. Furthermore, we extend this capability to local 3D editing, enabling the region specific editing of existing assets with skeletal guidance, which is unattainable by previous methods. Project Page: https://sk-adapter.github.io/

Parametric computer-aided design (CAD) is the dominant paradigm in mechanical engineering for physical design. Distinguished by relational geometry, parametric CAD models begin as two-dimensional sketches consisting of geometric primitives (e.g., line segments, arcs) and explicit constraints between them (e.g., coincidence, perpendicularity) that form the basis for three-dimensional construction operations. Training machine learning models to reason about and synthesize parametric CAD designs has the potential to reduce design time and enable new design workflows. Additionally, parametric CAD designs can be viewed as instances of constraint programming and they offer a well-scoped test bed for exploring ideas in program synthesis and induction. To facilitate this research, we introduce SketchGraphs, a collection of 15 million sketches extracted from real-world CAD models coupled with an open-source data processing pipeline. Each sketch is represented as a geometric constraint graph where edges denote designer-imposed geometric relationships between primitives, the nodes of the graph. We demonstrate and establish benchmarks for two use cases of the dataset: generative modeling of sketches and conditional generation of likely constraints given unconstrained geometry.

We present StdGEN++, a novel and comprehensive system for generating high-fidelity, semantically decomposed 3D characters from diverse inputs. Existing 3D generative methods often produce monolithic meshes that lack the structural flexibility required by industrial pipelines in gaming and animation. Addressing this gap, StdGEN++ is built upon a Dual-branch Semantic-aware Large Reconstruction Model (Dual-Branch S-LRM), which jointly reconstructs geometry, color, and per-component semantics in a feed-forward manner. To achieve production-level fidelity, we introduce a novel semantic surface extraction formalism compatible with hybrid implicit fields. This mechanism is accelerated by a coarse-to-fine proposal scheme, which significantly reduces memory footprint and enables high-resolution mesh generation. Furthermore, we propose a video-diffusion-based texture decomposition module that disentangles appearance into editable layers (e.g., separated iris and skin), resolving semantic confusion in facial regions. Experiments demonstrate that StdGEN++ achieves state-of-the-art performance, significantly outperforming existing methods in geometric accuracy and semantic disentanglement. Crucially, the resulting structural independence unlocks advanced downstream capabilities, including non-destructive editing, physics-compliant animation, and gaze tracking, making it a robust solution for automated character asset production.

While transformers achieve strong performance, their internal decision-making processes remain opaque. We investigate whether architectural constraints can enforce interpretability by design through architectural stream independence: maintaining a token stream (carrying symbolic structure) and contextual semantics in separated streams that remain independently observable throughout processing, with integration delayed until output. We validate this principle through the Late Fusion Architecture (LFA), which demonstrates interpretable symbolic heads through all the final layers, while standard transformers show dissolution by the third of six layers; we quantify this effect by introducing the Token-Position Dependence Score (PDS), with PDS_{max} = 0.276 and 0.058, respectively. Crucially, intervention experiments demonstrate functional modularity: suppressing LFA's recency heads causes minimal semantic damage (Cohen's d = -0.158) versus catastrophic entanglement in baselines (d = -0.672). LFA demonstrates that architectural constraints improve underlying learning mechanisms, averaging 42% stability versus 19% and 11% for baseline comparisons, with extremes from 50% on LFA's best pairs (6 of 12 heads position-invariant) down to 0% complete collapse in over-constrained cases. By preventing premature entanglement, architectural independence steers models toward semantic understanding over positional heuristics, establishing interpretability as an architectural design criterion enforceable through structural constraints rather than post-hoc analysis.

Parametric computer-aided design (CAD) tools are the predominant way that engineers specify physical structures, from bicycle pedals to airplanes to printed circuit boards. The key characteristic of parametric CAD is that design intent is encoded not only via geometric primitives, but also by parameterized constraints between the elements. This relational specification can be viewed as the construction of a constraint program, allowing edits to coherently propagate to other parts of the design. Machine learning offers the intriguing possibility of accelerating the design process via generative modeling of these structures, enabling new tools such as autocompletion, constraint inference, and conditional synthesis. In this work, we present such an approach to generative modeling of parametric CAD sketches, which constitute the basic computational building blocks of modern mechanical design. Our model, trained on real-world designs from the SketchGraphs dataset, autoregressively synthesizes sketches as sequences of primitives, with initial coordinates, and constraints that reference back to the sampled primitives. As samples from the model match the constraint graph representation used in standard CAD software, they may be directly imported, solved, and edited according to downstream design tasks. In addition, we condition the model on various contexts, including partial sketches (primers) and images of hand-drawn sketches. Evaluation of the proposed approach demonstrates its ability to synthesize realistic CAD sketches and its potential to aid the mechanical design workflow.

Speculative Decoding (SD) is a widely used approach to accelerate the inference of large language models (LLMs) without reducing generation quality. It operates by first using a compact model to draft multiple tokens efficiently, followed by parallel verification using the target LLM. This approach leads to faster inference compared to auto-regressive decoding. While there are multiple approaches to create a draft model, one promising approach is to use early-exit methods. These methods draft candidate tokens by using a subset of layers of the primary model and applying the remaining layers for verification, allowing a single model to handle both drafting and verification. While this technique reduces memory usage and computational cost, its performance relies on the choice of the exit layer for drafting and the number of tokens drafted (speculation length) in each SD round. Prior works use hyperparameter exploration to statically select these values. However, our evaluations show that these hyperparameter values are task-specific, and even within a task they are dependent on the current sequence context. We introduce DEL, a plug-and-play method that adaptively selects the exit layer and speculation length during inference. DEL dynamically tracks the token acceptance rate if the tokens are drafted at each layer of an LLM and uses that knowledge to heuristically select the optimal exit layer and speculation length. Our experiments across a broad range of models and downstream tasks show that DEL achieves overall speedups of 2.16timessim2.50times over vanilla auto-regressive decoding and improves upon the state-of-the-art SD methods by up to 0.27times.

In this work, we propose a framework that constructs reduced order models for nonlinear structural mechanics in a nonintrusive fashion, and can handle large scale simulations. We identify three steps that are carried out separately in time, and possibly on different devices: (i) the production of high-fidelity solutions by a commercial software, (ii) the offline stage of the model reduction and (iii) the online stage where the reduced order model is exploited. The nonintrusivity assumes that only the displacement field solution is known, and relies on operations on simulation data during the offline phase by using an in-house code. The compatibility with a new commercial code only needs the implementation of a routine converting the mesh and result format into our in-house data format. The nonintrusive capabilities of the framework are demonstrated on numerical experiments using commercial versions of the finite element softwares Zset and Ansys Mechanical. The nonlinear constitutive equations are evaluated by using the same external plugins as for Zset or Ansys Mechanical. The large scale simulations are handled using domain decomposition and parallel computing with distributed memory. The features and performances of the framework are evaluated on two numerical applications involving elastoviscoplastic materials: the second one involves a model of high-pressure blade, where the framework is used to extrapolate cyclic loadings in 6.5 hours, whereas the reference high-fidelity computation would take 9.5 days.

The paper presents a novel approach for vector-floorplan generation via a diffusion model, which denoises 2D coordinates of room/door corners with two inference objectives: 1) a single-step noise as the continuous quantity to precisely invert the continuous forward process; and 2) the final 2D coordinate as the discrete quantity to establish geometric incident relationships such as parallelism, orthogonality, and corner-sharing. Our task is graph-conditioned floorplan generation, a common workflow in floorplan design. We represent a floorplan as 1D polygonal loops, each of which corresponds to a room or a door. Our diffusion model employs a Transformer architecture at the core, which controls the attention masks based on the input graph-constraint and directly generates vector-graphics floorplans via a discrete and continuous denoising process. We have evaluated our approach on RPLAN dataset. The proposed approach makes significant improvements in all the metrics against the state-of-the-art with significant margins, while being capable of generating non-Manhattan structures and controlling the exact number of corners per room. A project website with supplementary video and document is here https://aminshabani.github.io/housediffusion.

We tackle the task of geometric image editing, where an object within an image is repositioned, reoriented, or reshaped while preserving overall scene coherence. Previous diffusion-based editing methods often attempt to handle all relevant subtasks in a single step, proving difficult when transformations become large or structurally complex. We address this by proposing a decoupled pipeline that separates object transformation, source region inpainting, and target region refinement. Both inpainting and refinement are implemented using a training-free diffusion approach, FreeFine. In experiments on our new GeoBench benchmark, which contains both 2D and 3D editing scenarios, FreeFine outperforms state-of-the-art alternatives in image fidelity, and edit precision, especially under demanding transformations. Code and benchmark are available at: https://github.com/CIawevy/FreeFine

Architectural Knowledge Management (AKM) is crucial for software development but remains challenging due to the lack of standardization and high manual effort. Architecture Decision Records (ADRs) provide a structured approach to capture Architecture Design Decisions (ADDs), but their adoption is limited due to the manual effort involved and insufficient tool support. Our previous work has shown that Large Language Models (LLMs) can assist in generating ADDs. However, simply prompting the LLM does not produce quality ADDs. Moreover, using third-party LLMs raises privacy concerns, while self-hosting them poses resource challenges. To this end, we experimented with different approaches like few-shot, retrieval-augmented generation (RAG) and fine-tuning to enhance LLM's ability to generate ADDs. Our results show that both techniques improve effectiveness. Building on this, we propose Domain Specific Retreival Augumented Few Shot Fine Tuninng, DRAFT, which combines the strengths of all these three approaches for more effective ADD generation. DRAFT operates in two phases: an offline phase that fine-tunes an LLM on generating ADDs augmented with retrieved examples and an online phase that generates ADDs by leveraging retrieved ADRs and the fine-tuned model. We evaluated DRAFT against existing approaches on a dataset of 4,911 ADRs and various LLMs and analyzed them using automated metrics and human evaluations. Results show DRAFT outperforms all other approaches in effectiveness while maintaining efficiency. Our findings indicate that DRAFT can aid architects in drafting ADDs while addressing privacy and resource constraints.

A recent line of synthetic-data work reconstructs the thinking behind existing text rather than rewriting the text itself, but it operates on short web passages, recovers only local thoughts, and leaves the structure of whole documents untouched. Scientific papers are written to a clear and largely uniform structure and make a natural substrate for lifting this paradigm to the document level. We present a pipeline that unfolds each paper into a multi-turn generation trajectory in which a teacher model reconstructs the writing process of the whole paper: a writing request, a global plan, and pre-writing deliberation for each section. All section texts and the abstract are kept verbatim from the source paper. We apply the pipeline to 1.8M quality-filtered arXiv papers and obtain a 60B-token corpus for continued pre-training (CPT) that is roughly twice the source text. The same reverse construction extends to instruction data and evaluation. We build an SFT dataset of 200K samples using answers derived from paper text. We also use held-out papers to construct PAW-Bench, a benchmark of 2,940 academic writing tasks with per-task rubrics and checklists. In controlled experiments, CPT on our corpus followed by SFT on public datasets improves writing performance while preserving general reasoning and improving long document reading. Replacing part of the writing SFT data with our synthetic instruction data further improves performance on PAW-Bench.

Speculative decoding accelerates language model inference by verifying multiple draft tokens in a single target-model pass. Recent parallel drafters have achieved breakthrough performance in frontier production models, but their effectiveness deteriorates as the entropy of target distributions increases due to insufficient draft diversity. To overcome this bottleneck without sacrificing parallelism, we introduce UBTree, a parallel drafter that couples a Unigram proposer with a Bigram selector to construct drafting Trees. The unigram proposer is trained with the standard cross-entropy objective to generate candidate tokens independently for each position, while a lightweight bigram selector predicts transition scores between adjacent candidate pairs. Unlike the proposer, the selector is trained with a renormalized KL objective on high-temperature data. This tree-native training broadens the supervision beyond the greedy path, encouraging plausible alternative branches that improve the chance of accepting additional tokens during tree verification. Across seven standardized benchmarks with Qwen3-4B and Qwen3-8B, UBTree achieves an average speedup of 5.84--6.94times over autoregressive decoding and outperforms DARTree in all 28 comparisons. Production-scale evaluation further demonstrates UBTree's advantage over frontier baselines such as DSpark.

Block diffusion accelerates speculative decoding by drafting multiple tokens in one forward pass. However, each position predicts a marginal distribution without observing earlier proposed tokens, limiting draft quality and acceptance length. We identify a concrete failure, the repetition trap, in which neighboring positions produce redundant copies of the same token. We explain this tendency theoretically and empirically examine its association with shorter accepted drafts. Recent methods refine marginal predictions with an additional causal head or a separately trained drafter, increasing parameter storage and introducing separate training objectives. We instead propose D-Loop, which introduces intra-block causal conditioning within the original diffusion drafter without additional model components. Inspired by semi-autoregressive generation and parameter sharing, D-Loop reuses the same backbone across looped passes. The first pass proposes a block, and the second conditions on a selected prefix to regenerate the suffix in parallel. A complementary prefix--suffix objective trains the shared drafter for both anchor-only prefix prediction and prefix-conditioned suffix prediction. Across eight math, code, and chat benchmarks, D-Loop can beat DFlash and DSpark on Qwen3-4B and Qwen3-8B with obvious gains.

The generation of industrial Computer-Aided Design (CAD) models from user requests and specifications is crucial to enhancing efficiency in modern manufacturing. Traditional methods of CAD generation rely heavily on manual inputs and struggle with complex or non-standard designs, making them less suited for dynamic industrial needs. To overcome these challenges, we introduce Text2CAD, a novel framework that employs stable diffusion models tailored to automate the generation process and efficiently bridge the gap between user specifications in text and functional CAD models. This approach directly translates the user's textural descriptions into detailed isometric images, which are then precisely converted into orthographic views, e.g., top, front, and side, providing sufficient information to reconstruct 3D CAD models. This process not only streamlines the creation of CAD models from textual descriptions but also ensures that the resulting models uphold physical and dimensional consistency essential for practical engineering applications. Our experimental results show that Text2CAD effectively generates technical drawings that are accurately translated into high-quality 3D CAD models, showing substantial potential to revolutionize CAD automation in response to user demands.

We present a novel generative 3D modeling system, coined CraftsMan, which can generate high-fidelity 3D geometries with highly varied shapes, regular mesh topologies, and detailed surfaces, and, notably, allows for refining the geometry in an interactive manner. Despite the significant advancements in 3D generation, existing methods still struggle with lengthy optimization processes, irregular mesh topologies, noisy surfaces, and difficulties in accommodating user edits, consequently impeding their widespread adoption and implementation in 3D modeling software. Our work is inspired by the craftsman, who usually roughs out the holistic figure of the work first and elaborates the surface details subsequently. Specifically, we employ a 3D native diffusion model, which operates on latent space learned from latent set-based 3D representations, to generate coarse geometries with regular mesh topology in seconds. In particular, this process takes as input a text prompt or a reference image and leverages a powerful multi-view (MV) diffusion model to generate multiple views of the coarse geometry, which are fed into our MV-conditioned 3D diffusion model for generating the 3D geometry, significantly improving robustness and generalizability. Following that, a normal-based geometry refiner is used to significantly enhance the surface details. This refinement can be performed automatically, or interactively with user-supplied edits. Extensive experiments demonstrate that our method achieves high efficacy in producing superior-quality 3D assets compared to existing methods. HomePage: https://craftsman3d.github.io/, Code: https://github.com/wyysf-98/CraftsMan

Structural topology optimization (TO) is central to engineering design but remains computationally intensive due to complex physics and hard constraints. Existing deep-learning methods are limited to fixed square grids, a few hand-coded boundary conditions, and post-hoc optimization, preventing general deployment. We introduce Optimize Any Topology (OAT), a foundation-model framework that directly predicts minimum-compliance layouts for arbitrary aspect ratios, resolutions, volume fractions, loads, and fixtures. OAT combines a resolution- and shape-agnostic autoencoder with an implicit neural-field decoder and a conditional latent-diffusion model trained on OpenTO, a new corpus of 2.2 million optimized structures covering 2 million unique boundary-condition configurations. On four public benchmarks and two challenging unseen tests, OAT lowers mean compliance up to 90% relative to the best prior models and delivers sub-1 second inference on a single GPU across resolutions from 64 x 64 to 256 x 256 and aspect ratios as high as 10:1. These results establish OAT as a general, fast, and resolution-free framework for physics-aware topology optimization and provide a large-scale dataset to spur further research in generative modeling for inverse design. Code & data can be found at https://github.com/ahnobari/OptimizeAnyTopology.

Computer-aided design (CAD) significantly enhances the efficiency, accuracy, and innovation of design processes by enabling precise 2D and 3D modeling, extensive analysis, and optimization. Existing methods for creating CAD models rely on latent vectors or point clouds, which are difficult to obtain and costly to store. Recent advances in Multimodal Large Language Models (MLLMs) have inspired researchers to use natural language instructions and images for CAD model construction. However, these models still struggle with inferring accurate 3D spatial location and orientation, leading to inaccuracies in determining the spatial 3D starting points and extrusion directions for constructing geometries. This work introduces CAD-GPT, a CAD synthesis method with spatial reasoning-enhanced MLLM that takes either a single image or a textual description as input. To achieve precise spatial inference, our approach introduces a 3D Modeling Spatial Mechanism. This method maps 3D spatial positions and 3D sketch plane rotation angles into a 1D linguistic feature space using a specialized spatial unfolding mechanism, while discretizing 2D sketch coordinates into an appropriate planar space to enable precise determination of spatial starting position, sketch orientation, and 2D sketch coordinate translations. Extensive experiments demonstrate that CAD-GPT consistently outperforms existing state-of-the-art methods in CAD model synthesis, both quantitatively and qualitatively.

We present SkexGen, a novel autoregressive generative model for computer-aided design (CAD) construction sequences containing sketch-and-extrude modeling operations. Our model utilizes distinct Transformer architectures to encode topological, geometric, and extrusion variations of construction sequences into disentangled codebooks. Autoregressive Transformer decoders generate CAD construction sequences sharing certain properties specified by the codebook vectors. Extensive experiments demonstrate that our disentangled codebook representation generates diverse and high-quality CAD models, enhances user control, and enables efficient exploration of the design space. The code is available at https://samxuxiang.github.io/skexgen.

Speculative decoding mitigates the latency of sequential generation in autoregressive Large Language Models (LLMs) by interleaving draft generation with target verification. However, existing parallel drafting backends often suffer from rapid accuracy degradation over long horizons, leading to high rejection rates during verification and suboptimal wall-clock speedups. We observe that drafting errors are not uniformly distributed but typically stem from localized high-uncertainty tokens that destabilize downstream generation trajectories. Motivated by this token error pattern, we propose CURE, a budget-aware dynamic repair tree designed to repair errors at uncertainty focal points without incurring prohibitive tree-verification overheads. Specifically, our method uses predictive confidence margins to dynamically locate candidate error tokens within a block-parallel draft, expands bounded repair paths only at these fragile nodes, and employs a novel repair resynchronization mechanism to realign draft states post-verification. Evaluations on code-generation benchmarks (HumanEval, MBPP, and LiveCodeBench-lite) and mathematical reasoning benchmark (GSM8K) demonstrate that CURE increases the average accepted length by 4.2-7.5% over parallel baselines without repair, translating to an end-to-end speedup of 2.66-3.49times over target-only decoding. Furthermore, we provide a plug-and-play repair module compatible with standard parallel drafting frameworks. We also characterize the trade-off between draft compute and verification efficiency.

Current diffusion or flow-based generative models for 3D shapes divide to two: distilling pre-trained 2D image diffusion models, and training directly on 3D shapes. When training a diffusion or flow models on 3D shapes a crucial design choice is the shape representation. An effective shape representation needs to adhere three design principles: it should allow an efficient conversion of large 3D datasets to the representation form; it should provide a good tradeoff of approximation power versus number of parameters; and it should have a simple tensorial form that is compatible with existing powerful neural architectures. While standard 3D shape representations such as volumetric grids and point clouds do not adhere to all these principles simultaneously, we advocate in this paper a new representation that does. We introduce Mosaic-SDF (M-SDF): a simple 3D shape representation that approximates the Signed Distance Function (SDF) of a given shape by using a set of local grids spread near the shape's boundary. The M-SDF representation is fast to compute for each shape individually making it readily parallelizable; it is parameter efficient as it only covers the space around the shape's boundary; and it has a simple matrix form, compatible with Transformer-based architectures. We demonstrate the efficacy of the M-SDF representation by using it to train a 3D generative flow model including class-conditioned generation with the 3D Warehouse dataset, and text-to-3D generation using a dataset of about 600k caption-shape pairs.

Autoregressive OCR vision-language models accurately convert document images into text and structured markup, but require one sequential decoding step per output token, limiting inference speed. Unlike open-ended text generation, OCR outputs are strongly grounded in the input image, making diffusion-based parallel generation promising. However, when several tokens are predicted in one diffusion step, each is predicted before the others are known. Committing them directly can therefore introduce errors. We therefore introduce GravityOCR, a parameter-shared AR-block-diffusion model jointly trained for parallel drafting and causal AR verification. Verifying drafts before commitment lets the model commit multiple output tokens per round without a separate drafting network. The causal AR path also enables GRPO with sequence- and structure-level OCR rewards, avoiding diffusion-trajectory likelihood estimation while updating the shared drafter parameters. On OmniDocBench v1.6, AR-path GRPO improves the Overall score from 94.92 to 95.16 without reducing diffusion drafting efficiency, while the final model remains close to the original GLM-OCR score of 95.48. In an SGLang serving deployment, GravityOCR commits an average of 9.7 output tokens per forward pass and achieves a 3.94times decode-only speedup on region crops and a 1.32times end-to-end page-processing speedup over AR decoding.

Computer-Aided Design (CAD) models are defined by their construction history: a parametric recipe that encodes design intent. However, existing large-scale 3D datasets predominantly consist of boundary representations (B-Reps) or meshes, stripping away this critical procedural information. To address this scarcity, we introduce Zero-to-CAD, a scalable framework for synthesizing executable CAD construction sequences. We frame synthesis as an agentic search problem: by embedding a large language model (LLM) within a feedback-driven CAD environment, our system iteratively generates, executes, and validates code using tools and documentation lookup to promote geometric validity and operation diversity. This agentic approach enables the synthesis of approximately one million executable, readable, editable CAD sequences, covering a rich vocabulary of operations beyond sketch-and-extrude workflows. We also release a curated subset of 100,000 high-quality models selected for geometric diversity. To demonstrate the dataset's utility, we fine-tune a vision-language model on our synthetic data to reconstruct editable CAD programs from multi-view images, outperforming strong baselines, including GPT-5.2, and effectively bootstrapping sequence generation capabilities without real construction-history training data. Zero-to-CAD bridges the gap between geometric scale and parametric interpretability, offering a vital resource for the next generation of CAD AI.

Speculative decoding accelerates LLM inference by verifying multiple drafted tokens in parallel, allowing a single target forward pass to accept several tokens. By construction, verification computes representations for both accepted and rejected tokens. Yet, conventional drafters retain only the representations of accepted tokens, leaving the substantial verifier computation spent on rejected tokens effectively wasted. We find that these discarded hidden states generated during target forward retain useful information about future tokens that can improve subsequent drafts. However, realizing this opportunity poses two distinct challenges. At inference, recycling overhead can increase drafting latency, diminishing the speedup gained from increased acceptance length. During training, standard parallel drafter training does not produce inference-aligned rejected states, while obtaining them through sequential rollouts would sacrifice parallelism across training positions. We introduce Carryover Drafting, which addresses both challenges. Carryover recycles rejected target hidden states as temporary KV context, allowing the drafter to selectively attend to them. It reuses the drafter's existing interface and adds only a single learned embedding to distinguish rejected states from committed context. The additional KV context is replaced each drafting round, keeping its length bounded by one proposal block. We introduce parallel draft--verify--draft training that exposes the drafter to inference-aligned rejected states while preserving parallelism across training positions. Experiments with DFlash and a DSpark-derived semi-autoregressive drafter across two target models show that this simple Carryover mechanism improves average acceptance length by 6.5--14.7% and end-to-end vLLM speedup by 7.9--14.4% over the corresponding baselines, with speedup gains reaching 28.8% on translation.

Speculative decoding generally dictates having a small, efficient draft model that is either pretrained or distilled offline to a particular target model series, for instance, Llama or Qwen models. However, within online deployment settings, there are two major challenges: 1) usage of a target model that is incompatible with the draft model; 2) expectation of latency improvements over usage and time. In this work, we propose OmniDraft, a unified framework that enables a single draft model to operate with any target model and adapt dynamically to user data. We introduce an online n-gram cache with hybrid distillation fine-tuning to address the cross-vocabulary mismatch across draft and target models; and further improve decoding speed by leveraging adaptive drafting techniques. OmniDraft is particularly suitable for on-device LLM applications where model cost, efficiency and user customization are the major points of contention. This further highlights the need to tackle the above challenges and motivates the ``one drafter for all'' paradigm. We showcase the proficiency of the OmniDraft framework by performing online learning on math reasoning, coding and text generation tasks. Notably, OmniDraft enables a single Llama-68M model to pair with various target models including Vicuna-7B, Qwen2-7B and Llama3-8B models for speculative decoding; and additionally provides up to 1.5-2x speedup.

Generative models are now used to create a variety of high-quality digital artifacts. Yet their use in designing physical objects has received far less attention. In this paper, we advocate for the construction toy, LEGO, as a platform for developing generative models of sequential assembly. We develop a generative model based on graph-structured neural networks that can learn from human-built structures and produce visually compelling designs. Our code is released at: https://github.com/uoguelph-mlrg/GenerativeLEGO.

Speculative decoding (SD) is a promising method for accelerating the decoding process of Large Language Models (LLMs). The efficiency of SD primarily hinges on the consistency between the draft model and the verify model. However, existing drafting approaches typically require additional modules to be trained, which can be challenging to implement and ensure compatibility across various LLMs. In this paper, we propose CLaSp, an in-context layer-skipping strategy for self-speculative decoding. Unlike prior methods, CLaSp does not require additional drafting modules or extra training. Instead, it employs a plug-and-play mechanism by skipping intermediate layers of the verify model to construct a compressed draft model. Specifically, we develop a dynamic programming algorithm that optimizes the layer-skipping process by leveraging the complete hidden states from the last verification stage as an objective. This enables CLaSp to dynamically adjust its layer-skipping strategy after each verification stage, without relying on pre-optimized sets of skipped layers. Experimental results across diverse downstream tasks demonstrate that CLaSp achieves a speedup of 1.3x ~ 1.7x on LLaMA3 series models without altering the original distribution of the generated text.

Large Language Model (LLM) agents have shown great potential for solving real-world problems and promise to be a solution for tasks automation in industry. However, more benchmarks are needed to systematically evaluate automation agents from an industrial perspective, for example, in Civil Engineering. Therefore, we propose DrafterBench for the comprehensive evaluation of LLM agents in the context of technical drawing revision, a representation task in civil engineering. DrafterBench contains twelve types of tasks summarized from real-world drawing files, with 46 customized functions/tools and 1920 tasks in total. DrafterBench is an open-source benchmark to rigorously test AI agents' proficiency in interpreting intricate and long-context instructions, leveraging prior knowledge, and adapting to dynamic instruction quality via implicit policy awareness. The toolkit comprehensively assesses distinct capabilities in structured data comprehension, function execution, instruction following, and critical reasoning. DrafterBench offers detailed analysis of task accuracy and error statistics, aiming to provide deeper insight into agent capabilities and identify improvement targets for integrating LLMs in engineering applications. Our benchmark is available at https://github.com/Eason-Li-AIS/DrafterBench, with the test set hosted at https://huggingface.co/datasets/Eason666/DrafterBench.

Large language models (LLMs) excel at generating long chains of thought, but long reasoning traces are often verbose and memory-inefficient. In this work, we introduce Structured Thoughts, a framework that organizes reasoning into alternating <try> and <outcome> blocks: <try> captures exploratory scratch work, while <outcome> contains the distilled conclusion of that step. We construct a dataset of structured thoughts by segmenting reasoning traces into <try> blocks and prompting an LLM to summarize each step into its corresponding <outcome>. Fine-tuning pretrained foundation models on this reformatted data produces models that adopt the structured reasoning style, leading to performance gains of up to 8.08\% on reasoning benchmarks compared to standard SFT. The explicit structure also enables context pruning: after each <try>/<outcome> pair, the <try> can be pruned, allowing the model to retain conclusions without keeping the full scratch work in the context. A proof-of-concept pruning implementation achieves an average of 85\% memory / context savings with an 8.67\% performance drop across mathematical tasks.

While the community of 3D point cloud generation has witnessed a big growth in recent years, there still lacks an effective way to enable intuitive user control in the generation process, hence limiting the general utility of such methods. Since an intuitive way of decomposing a shape is through its parts, we propose to tackle the task of controllable part-based point cloud generation. We introduce DiffFacto, a novel probabilistic generative model that learns the distribution of shapes with part-level control. We propose a factorization that models independent part style and part configuration distributions and presents a novel cross-diffusion network that enables us to generate coherent and plausible shapes under our proposed factorization. Experiments show that our method is able to generate novel shapes with multiple axes of control. It achieves state-of-the-art part-level generation quality and generates plausible and coherent shapes while enabling various downstream editing applications such as shape interpolation, mixing, and transformation editing. Project website: https://difffacto.github.io/

Speculative Decoding (SD) has emerged as a widely used paradigm to accelerate the inference of large language models (LLMs) without compromising generation quality. It works by efficiently drafting multiple tokens using a compact model and then verifying them in parallel using the target LLM. Notably, Self-Speculative Decoding proposes skipping certain layers to construct the draft model, which eliminates the need for additional parameters or training. Despite its strengths, we observe in this work that drafting with layer skipping exhibits significant sensitivity to domain shifts, leading to a substantial drop in acceleration performance. To enhance the domain generalizability of this paradigm, we introduce KNN-SSD, an algorithm that leverages K-Nearest Neighbor (KNN) search to match different skipped layers with various domain inputs. We evaluated our algorithm in various models and multiple tasks, observing that its application leads to 1.3x-1.6x speedup in LLM inference.

Computer-use agents are increasingly evaluated in realistic desktop environments, but existing benchmarks provide limited coverage of professional engineering workflows whose outputs are persistent, structured artifacts. Mechanical computer-aided design (CAD) is a particularly demanding setting: an agent must manipulate geometry and constraints over long interaction horizons while producing a native project whose dimensions, construction structure, and downstream engineering state remain valid. We introduce CADWorld, a benchmark for long-horizon computer use in FreeCAD. CADWorld contains 200 tasks spanning 11 mechanical-CAD workflow categories, including sketching, part modeling, assembly, CAM, FEM, measurement, mesh processing, and technical drawing. Agents operate through screenshots and GUI actions, while success is determined by task-specific executable checks over saved FreeCAD artifacts and auxiliary outputs, covering geometric properties, parametric structure, constraints, manufacturing state, and simulation results. Across seven current agents on the full benchmark, the strongest agent achieves 17.5\% success, compared with an 87.0\% expert reference pass. We find that weaker agents often fail before producing a valid artifact, whereas stronger agents increasingly fail on structural, geometric, and construction-process requirements. CADWorld therefore exposes a gap between general GUI competence and reliable execution of persistent, verifiable engineering workflows. Project accessible at https://cad-world.github.io.

Block diffusion speculative decoding accelerates LLM inference by predicting all tokens within a block simultaneously for the target model to verify in parallel. Predicting an entire block at once requires a sufficiently capable draft model and effective utilization of the target model's internal knowledge. However, the state-of-the-art method DFlash constrains all draft layers to share a single fused representation derived from only a few target layers, limiting per-layer expressiveness and hindering further scaling of draft capacity. In this paper, we present \modelname, which flares out the narrow conditioning bottleneck of DFlash through a lightweight layer-wise fusion mechanism: each draft layer attends to its own learnable combination of a broad set of target layers at negligible overhead, simultaneously injecting richer target knowledge and providing every draft layer with a distinct input. This enhanced per-layer expressiveness enables scaling the draft model to deeper architectures with consistent gains. We further scale training data from 800K to 2.4M samples to fully exploit the enlarged capacity. On six benchmarks spanning mathematical reasoning, code generation, and conversation, \modelname attains average wall-clock speedups of 5.52x on Qwen3-4B, 5.46x on Qwen3-8B, and 3.91x on GPT-OSS-20B, improving over DFlash by roughly 11\%, 8\%, and 5\% respectively. Our code is available at https://github.com/Tencent/AngelSlim.

Diffusion-based 3D generation has made remarkable progress in recent years. However, existing 3D generative models often produce overly dense and unstructured meshes, which stand in stark contrast to the compact, structured, and sharply-edged Computer-Aided Design (CAD) models crafted by human designers. To address this gap, we introduce CADDreamer, a novel approach for generating boundary representations (B-rep) of CAD objects from a single image. CADDreamer employs a primitive-aware multi-view diffusion model that captures both local geometric details and high-level structural semantics during the generation process. By encoding primitive semantics into the color domain, the method leverages the strong priors of pre-trained diffusion models to align with well-defined primitives. This enables the inference of multi-view normal maps and semantic maps from a single image, facilitating the reconstruction of a mesh with primitive labels. Furthermore, we introduce geometric optimization techniques and topology-preserving extraction methods to mitigate noise and distortion in the generated primitives. These enhancements result in a complete and seamless B-rep of the CAD model. Experimental results demonstrate that our method effectively recovers high-quality CAD objects from single-view images. Compared to existing 3D generation techniques, the B-rep models produced by CADDreamer are compact in representation, clear in structure, sharp in edges, and watertight in topology.

Computer-aided design (CAD) defines 3D models as compact, precise, and editable representations, making it directly useful for several fields. Recently, CAD generation has been gaining more attention in both the research community and industry. Crafting CAD models has long been a painstaking and time-intensive task, demanding both precision and expertise from designers. Prior works have achieved early success in single-part CAD generation, which is not well-suited for real-world applications, as multiple parts need to be assembled under semantic constraints and geometric compatibility. In this paper, we propose CADKnitter, a compositional CAD generation framework with geometric-guiding cues to steer diffusion sampling. CADKnitter is able to generate a complementary CAD part that follows both the geometric constraints of the given CAD model and the semantic constraints of the desired design text prompt. We also curate a dataset, so-called KnitCAD, containing over 310,000 samples of CAD models, along with textual prompts and assembly metadata that provide semantic and geometric constraints. Intensive experiments demonstrate that our proposed method outperforms other state-of-the-art baselines by a clear margin. Our project page is available at https://cadknitter.github.io/.

Structural modeling is a fundamental component of computational engineering science, in which even minor physical inconsistencies or specification violations may invalidate downstream simulations. The potential of large language models (LLMs) for automatic generation of modeling code has been demonstrated. However, non-executable or physically inconsistent outputs remain prevalent under stringent engineering constraints. A framework for physics-consistent automatic building modeling is therefore proposed, integrating domain knowledge construction, constraint-oriented model alignment, and verification-driven evaluation. CivilInstruct is introduced as a domain-specific dataset that formalizes structural engineering knowledge and constraint reasoning to enable simulation-ready model generation. A two-stage fine-tuning strategy is further employed to enforce constraint satisfaction and application programming interface compliance, substantially reducing hallucinated and non-conforming outputs. MBEval is presented as a verification-driven benchmark that evaluates executability and structural dynamics consistency through closed-loop validation. Experimental results show consistent improvements over baselines across rigorous verification metrics. Our code is available at https://github.com/Jovanqing/AutoBM.

Speculative decoding accelerates large language model (LLM) inference without compromising output quality. Recent parallel drafting methods further improve single-request performance by decoupling draft length from drafting latency, enabling longer drafts and higher mean accepted tokens (MAT). However, under high request concurrency, long drafts waste substantial computation on rejected tokens, increasing verification cost and potentially making speculative decoding slower than autoregressive decoding. We present D-Cut, an adaptive pruning method that selects draft tokens jointly across the batch and concentrates the verification budget on tokens most likely to be accepted. D-Cut is motivated by two observations. First, acceptance lengths vary considerably across concurrent requests; D-Cut therefore performs cross-request pruning, allocating the verification budget adaptively according to draft confidence. Second, verification cost depends strongly on the deployment environment, including GPU architecture and parallelism strategy; D-Cut incorporates a runtime cost model to adapt its pruning depth to the target environment. Experiments on dense and mixture-of-experts (MoE) models show that, under high concurrency, D-Cut improves the average speedup from \(1.26\times\) to \(1.65\times\), restores acceleration in dense-model configurations where long-draft baselines are slower than autoregressive decoding, and achieves up to \(3.0\times\) speedup over autoregressive decoding on MoE models.

Although the recent rapid evolution of 3D generative neural networks greatly improves 3D shape generation, it is still not convenient for ordinary users to create 3D shapes and control the local geometry of generated shapes. To address these challenges, we propose a diffusion-based 3D generation framework -- locally attentional SDF diffusion, to model plausible 3D shapes, via 2D sketch image input. Our method is built on a two-stage diffusion model. The first stage, named occupancy-diffusion, aims to generate a low-resolution occupancy field to approximate the shape shell. The second stage, named SDF-diffusion, synthesizes a high-resolution signed distance field within the occupied voxels determined by the first stage to extract fine geometry. Our model is empowered by a novel view-aware local attention mechanism for image-conditioned shape generation, which takes advantage of 2D image patch features to guide 3D voxel feature learning, greatly improving local controllability and model generalizability. Through extensive experiments in sketch-conditioned and category-conditioned 3D shape generation tasks, we validate and demonstrate the ability of our method to provide plausible and diverse 3D shapes, as well as its superior controllability and generalizability over existing work. Our code and trained models are available at https://zhengxinyang.github.io/projects/LAS-Diffusion.html

LLM-based agents are increasingly capable of generating complex 3D structures, with the potential to reshape how objects are designed and realized in the physical world. Yet, producing elegant geometry is fundamentally different from producing objects that can be built and perform their intended functions. Existing evaluations largely focus on geometric quality while overlooking physical realizability. We introduce LMBuild, a benchmark for evaluating LLM agents on generating buildable and functional structures. LMBuild represents generated objects as assembled structures comprising part decompositions, joints, materials, and sequences. To support reproducible evaluation, we provide a unified framework consisting of: (1) an interactive environment in which agents can use tools to retrieve, create, and place components to construct objects; (2) a curated benchmark that repurposes established CAD datasets and augments them with knowledge from Wikipedia; and (3) a evaluation framework covering structural soundness, functional affordance, design quality, and physical realization. Evaluations across 30 systems reveal several intriguing findings: (a) Soundness and alignment are no longer the primary bottlenecks for frontier closed-source models, while functional affordance and physical operability remain substantially more challenging; (b) stronger models more effectively create new components, whereas weaker models tend to rely on retrieval; and (c) providing functional specifications substantially improves part completeness, kinematics, and physical operability. These results show that generating real-world structures requires deeper reasoning about functional affordances, mechanics, and designing and creating novel components. We expect LMBuild to provide a foundation for measuring progress and incentivizing research toward agents that generate buildable and functional structures.

The rapid development of AR/VR brings tremendous demands for 3D content. While the widely-used Computer-Aided Design (CAD) method requires a time-consuming and labor-intensive modeling process, sketch-based 3D modeling offers a potential solution as a natural form of computer-human interaction. However, the sparsity and ambiguity of sketches make it challenging to generate high-fidelity content reflecting creators' ideas. Precise drawing from multiple views or strategic step-by-step drawings is often required to tackle the challenge but is not friendly to novice users. In this work, we introduce a novel end-to-end approach, Deep3DSketch+, which performs 3D modeling using only a single free-hand sketch without inputting multiple sketches or view information. Specifically, we introduce a lightweight generation network for efficient inference in real-time and a structural-aware adversarial training approach with a Stroke Enhancement Module (SEM) to capture the structural information to facilitate learning of the realistic and fine-detailed shape structures for high-fidelity performance. Extensive experiments demonstrated the effectiveness of our approach with the state-of-the-art (SOTA) performance on both synthetic and real datasets.

Structure reasoning is a fundamental capability of large language models (LLMs), enabling them to reason about structured commonsense and answer multi-hop questions. However, existing benchmarks for structure reasoning mainly focus on horizontal and coordinate structures (e.g. graphs), overlooking the hierarchical relationships within them. Hierarchical structure reasoning is crucial for human cognition, particularly in memory organization and problem-solving. It also plays a key role in various real-world tasks, such as information extraction and decision-making. To address this gap, we propose HiBench, the first framework spanning from initial structure generation to final proficiency assessment, designed to benchmark the hierarchical reasoning capabilities of LLMs systematically. HiBench encompasses six representative scenarios, covering both fundamental and practical aspects, and consists of 30 tasks with varying hierarchical complexity, totaling 39,519 queries. To evaluate LLMs comprehensively, we develop five capability dimensions that depict different facets of hierarchical structure understanding. Through extensive evaluation of 20 LLMs from 10 model families, we reveal key insights into their capabilities and limitations: 1) existing LLMs show proficiency in basic hierarchical reasoning tasks; 2) they still struggle with more complex structures and implicit hierarchical representations, especially in structural modification and textual reasoning. Based on these findings, we create a small yet well-designed instruction dataset, which enhances LLMs' performance on HiBench by an average of 88.84\% (Llama-3.1-8B) and 31.38\% (Qwen2.5-7B) across all tasks. The HiBench dataset and toolkit are available here, https://github.com/jzzzzh/HiBench, to encourage evaluation.

We introduce the Dual-View Pheromone Pathway Network (DPPN), an architecture that routes sparse attention through a persistent pheromone field over latent slot transitions, and use it to discover two independent requirements for persistent structural memory in neural networks. Through five progressively refined experiments using up to 10 seeds per condition across 5 model variants and 4 transfer targets, we identify a core principle: persistent memory requires a stable coordinate system, and any coordinate system learned jointly with the model is inherently unstable. We characterize three obstacles -- pheromone saturation, surface-structure entanglement, and coordinate incompatibility -- and show that neither contrastive updates, multi-source distillation, Hungarian alignment, nor semantic decomposition resolves the instability when embeddings are learned from scratch. Fixed random Fourier features provide extrinsic coordinates that are stable, structure-blind, and informative, but coordinate stability alone is insufficient: routing-bias pheromone does not transfer (10 seeds, p>0.05). DPPN outperforms transformer and random sparse baselines for within-task learning (AULC 0.700 vs 0.680 vs 0.670). Replacing routing bias with learning-rate modulation eliminates negative transfer: warm pheromone as a learning-rate prior achieves +0.003 on same-family tasks (17 seeds, p<0.05) while never reducing performance. A structure completion function over extrinsic coordinates produces +0.006 same-family bonus beyond regularization, showing the catch-22 between stability and informativeness is partially permeable to learned functions. The contribution is two independent requirements for persistent structural memory: (a) coordinate stability and (b) graceful transfer mechanism.

Large language model (LLM)-based systems are becoming increasingly popular for solving tasks by constructing executable workflows that interleave LLM calls, information retrieval, tool use, code execution, memory updates, and verification. This survey reviews recent methods for designing and optimizing such workflows, which we treat as agentic computation graphs (ACGs). We organize the literature based on when workflow structure is determined, where structure refers to which components or agents are present, how they depend on each other, and how information flows between them. This lens distinguishes static methods, which fix a reusable workflow scaffold before deployment, from dynamic methods, which select, generate, or revise the workflow for a particular run before or during execution. We further organize prior work along three dimensions: when structure is determined, what part of the workflow is optimized, and which evaluation signals guide optimization (e.g., task metrics, verifier signals, preferences, or trace-derived feedback). We also distinguish reusable workflow templates, run-specific realized graphs, and execution traces, separating reusable design choices from the structures actually deployed in a given run and from realized runtime behavior. Finally, we outline a structure-aware evaluation perspective that complements downstream task metrics with graph-level properties, execution cost, robustness, and structural variation across inputs. Our goal is to provide a clear vocabulary, a unified framework for positioning new methods, a more comparable view of existing body of literature, and a more reproducible evaluation standard for future work in workflow optimizations for LLM agents.

Industrial Computer-Aided Design (CAD) code generation requires models to produce executable parametric programs from visual or textual inputs. Beyond recognizing the outer shape of a part, this task involves understanding its 3D structure, inferring engineering parameters, and choosing CAD operations that reflect how the part would be designed and manufactured. Despite the promise of Multimodal large language models (MLLMs) for this task, they are rarely evaluated on whether these capabilities jointly hold in realistic industrial CAD settings. We present BenchCAD, a unified benchmark for industrial CAD reasoning. BenchCAD contains 17,900 execution-verified CadQuery programs across 106 industrial part families, including bevel gears, compression springs, twist drills, and other reusable engineering designs. It evaluates models through visual question answering, code question answering, image-to-code generation, and instruction-guided code editing, enabling fine-grained analysis across perception, parametric abstraction, and executable program synthesis. Across 10+ frontier models, BenchCAD shows that current systems often recover coarse outer geometry but fail to produce faithful parametric CAD programs. Common failures include missing fine 3D structure, misinterpreting industrial design parameters, and replacing essential operations such as sweeps, lofts, and twist-extrudes with simpler sketch-and-extrude patterns. Fine-tuning and reinforcement learning improve in-distribution performance, but generalization to unseen part families remains limited. These results position BenchCAD as a benchmark for measuring and improving the industrial readiness of multimodal CAD automation.

The autoregressive nature of large language models (LLMs) limits inference speed. Each forward pass generates only a single token and is often bottlenecked by memory bandwidth. Speculative decoding alleviates this issue using a draft-then-verify approach to accelerate token generation. However, the overhead introduced during the draft phase and the training cost of the draft model limit the efficiency and adaptability of speculative decoding. In this work, we introduce PARallel Draft (PARD), a novel speculative decoding method that enables low-cost adaptation of autoregressive draft models into parallel draft models. PARD enhances inference efficiency by predicting multiple future tokens in a single forward pass of the draft phase, and incorporates a conditional drop token method to accelerate training. Its target-independence property allows a single draft model to be applied to an entire family of different models, minimizing the adaptation cost. Our proposed conditional drop token method can improves draft model training efficiency by 3x. On our optimized inference framework, PARD accelerates LLaMA3.1-8B inference by 4.08x, achieving 311.5 tokens per second.

Understanding the physical structure is essential for real-world applications such as embodied agents, interactive design, and long-horizon manipulation. Yet, prevailing Vision-Language Model (VLM) evaluations still center on structure-agnostic, single-turn setups (e.g., VQA), which fail to assess agents' ability to reason about how geometry, contact, and support relations jointly constrain what actions are possible in a dynamic environment. To address this gap, we introduce the Causal Hierarchy of Actions and Interactions (CHAIN) benchmark, an interactive 3D, physics-driven testbed designed to evaluate whether models can understand, plan, and execute structured action sequences grounded in physical constraints. CHAIN shifts evaluation from passive perception to active problem solving, spanning tasks such as interlocking mechanical puzzles and 3D stacking and packing. We conduct a comprehensive study of state-of-the-art VLMs and diffusion-based models under unified interactive settings. Our results show that top-performing models still struggle to internalize physical structure and causal constraints, often failing to produce reliable long-horizon plans and cannot robustly translate perceived structure into effective actions. The project is available at https://social-ai-studio.github.io/CHAIN/.

End-to-end manga generation is a structured visual storytelling task that requires story decomposition, recurring character and scene grounding, page layout design, panel rendering, page composition, and lettering. However, existing generative models often perform direct page synthesis, entangling these factors in a single visual output and limiting precise control over layout geometry, visual references, and cross-panel consistency. To address these limitations, we propose MangaFlow, an agentic framework for controllable long-form manga generation that decomposes manga creation into planning, grounding, layout construction, reference-conditioned rendering, composition, and text placement. By treating layout and visual references as explicit intermediate variables, MangaFlow enables both simple text-to-manga generation and more precise user-controlled manga creation. This design exposes layout, visual assets, and lettering as editable intermediate controls for refining panel geometry, references, and text placement. To support long-form consistency, MangaFlow introduces a story section memory that links section descriptions with corresponding character, scene, and object references for reuse across panels. We further present a meta-benchmark for evaluating layout controllability, visual consistency, and generation quality. Experiments show that MangaFlow improves layout adherence and cross-panel consistency over direct generation baselines while supporting flexible human control.