new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Oct 21

Shared-Prefix KV Reuse Across Standard LoRA Adapters: Quality and Serving Tradeoffs

A common small-model deployment runs one shared backbone with several LoRA specialists that answer over the same context. Serving them naively re-prefills that shared context once per specialist. We study a narrow, practical question: for already-trained standard LoRA adapters -- not adapters retrained for cache compatibility -- how much task quality is preserved if the backbone's prefill KV cache is computed once and reused across specialists, and what does that buy in serving cost? On a Qwen3-1.7B backbone with two adapters (extractive QA on HotpotQA, arithmetic reasoning on GSM8K), we sweep the boundary at which the specialist takes over from the reused base cache and measure paired quality differences and serving cost. Full-prefix reuse had the lowest prefill cost and a small quality difference on held-out GSM8K (Delta = -4.6 EM at a 160-token budget; -3.0 at 320 tokens; -0.8 under a second training seed -- all favoring native, only the first excluding zero, and the magnitude not consistent). Partial recomputation provided no demonstrated advantage. Neither quality equivalence nor a general boundary-selection rule is established. We also report a closed-form ridge KV translator that did not beat direct reuse, and specialist-dependence contrasts whose intervals all include zero. The measured serving benefit is warm-cache time-to-first-token, which grows with context (~16x at 8K); two-branch peak memory was only 12% lower and, on inspection, the prefix was never physically shared across branches -- this implementation reuses KV values but copies their storage, so shared-cache memory savings are not achieved.

  • 1 authors
·
Sep 14

RelayCaching: Accelerating LLM Collaboration via Decoding KV Cache Reuse

The increasing complexity of AI tasks has shifted the paradigm from monolithic models toward multi-agent large language model (LLM) systems. However, these collaborative architectures introduce a critical bottleneck: redundant prefill computation for shared content generated by previous agents, which significantly increases KV cache memory usage and time-to-first-token (TTFT). While various KV cache methods have been proposed to mitigate prefill redundancy, they either fail to maintain accuracy on agent-generated outputs or exhibit low reuse rates due to rigid constraints. We present RelayCaching, a training-free inference method that directly reuses decoding phase KV caches from previous agents in subsequent prefill phases. Our key insight is that KV caches for identical content are highly consistent across phases, while prefix-induced deviations are sparse and localized within a limited range of layers and token positions. By selectively recomputing KV caches at these positions, RelayCaching preserves model accuracy with minimal overhead, yielding a superior accuracy-efficiency trade-off over existing methods. Experiments on diverse collaborative LLM tasks spanning mathematical reasoning, general knowledge, and code generation demonstrate that RelayCaching achieves over 80% KV cache reuse, reduces TTFT by up to 4.7times compared to the standard pipeline, all with negligible accuracy degradation.

  • 5 authors
·
Feb 27

LoopCoder-v2: Only Loop Once for Efficient Test-Time Computation Scaling

Looped Transformers scale latent computation by repeatedly applying shared blocks, but sequential looping increases latency and KV-cache memory with the loop count. Parallel loop Transformers (PLT) alleviate this cost through cross-loop position offsets (CLP) and shared-KV gated sliding-window attention, making loop count a practical design choice. We therefore study PLT loop-count selection through a gain--cost view: an extra loop may refine representations, but CLP also introduces a positional mismatch at each loop boundary. We instantiate this study by training LoopCoder-v2, a family of 7B PLT coders with different loop counts, from scratch on 18T tokens, followed by matched instruction tuning and evaluation. Empirically, the two-loop variant delivers broad gains over the non-looped baseline across code generation, code reasoning, agentic software engineering, and tool-use benchmarks, improving SWE-bench Verified from 43.0 to 64.4 points and Multi-SWE from 14.0 to 31.0 points. In contrast, variants with three or more loops regress, revealing a strongly non-monotonic loop-count effect. Our diagnostics show that loop 2 provides the main productive refinement, while later loops yield diminishing, oscillatory updates and reduced representational diversity. Because the CLP-induced mismatch remains roughly fixed as refinement gains shrink, the offset cost increasingly dominates. This gain--cost trade-off explains PLT's saturation at two loops and provides diagnostics for loop-count selection.

  • 19 authors
·
Jun 15 4

CrossPool: Efficient Multi-LLM Serving for Cold MoE Models through KV-Cache and Weight Disaggregation

Emerging LLM services increasingly host many sparse MoE models, yet most models receive sparse requests and remain cold. This creates a GPU memory problem: model weights are stable and model-determined, while KV-cache is transient and demand-determined. Because cold models rarely reach peak KV-cache demand at the same time, reserving worst-case KV capacity per model wastes memory; a shared KV-cache pool can instead provision aggregate active demand. However, KV-cache sharing is not sufficient when weights and KV-cache remain in a monolithic GPU memory pool. Static weights compete with dynamic KV-cache, and KV-head-limited attention under cold, low-concurrency traffic exposes only a fraction of replicated KV capacity, leading to low GPU memory utilization and weak long-context support. We present CrossPool, a serving engine for cold MoE models that separates FFN weights and KV-cache into two GPU memory pools: a weights pool that consolidates FFN weights across cold models, and a KV-cache pool that dynamically serves active requests while keeping attention local to KV-cache. CrossPool combines a KV-cache planner and virtualizer, a layer-wise pipeline scheduler that hides hidden-state transfers, and persistent kernels with control lowering to reduce CPU-GPU control overhead. With efficient GPU memory pooling, CrossPool underpins bursty long-context requests and outperforms the state-of-the-art kvcached-based multi-LLM serving system, reducing P99 TBT by up to 10.4x.

  • 7 authors
·
Jun 25

LRAgent: Efficient KV Cache Sharing for Multi-LoRA LLM Agents

Role specialization in multi-LLM agent systems is often realized via multi-LoRA, where agents share a pretrained backbone and differ only through lightweight adapters. Despite sharing base model weights, each agent independently builds and stores its own KV cache for the same long, tool-augmented trajectories, incurring substantial memory and compute overhead. Existing KV cache sharing methods largely overlook this multi-LoRA setting. We observe that, across agents, cache differences are dominated by adapter outputs, while activations from the shared pretrained backbone remain highly similar. Based on this observation, we propose LRAgent, a KV cache sharing framework for multi-LoRA agents that decomposes the cache into a shared base component from the pretrained weights and an adapter-dependent component from LoRA weights. LRAgent reduces memory overhead by sharing the base component and storing the adapter component in its inherent low-rank form, and further reduces compute overhead, enabled by shared-A multi-LoRA architectures, by also sharing the low-rank cache and avoiding redundant computations for contexts already processed by other agents. To efficiently reconstruct adapter contributions at runtime, we introduce Flash-LoRA-Attention, a kernel that reorders attention computation to avoid materializing the low-rank cache to full dimension. LRAgent achieves throughput and time-to-first-token latency close to fully shared caching, while preserving accuracy near the non-shared caching baseline across agentic question-answering benchmarks.

KVCMAS: Efficient KV cache Correction for Shared Context in Multi-Agent Systems

Prompt-specialized multi-agent systems enable multiple agents to share a model while performing complementary roles to solve complex tasks. However, agent-specific prefixes change the KV cache generated for the same shared context, causing each agent to repeatedly prefill the growing context and construct a separate cache with high computation and memory overhead. Selective recomputation reduces this redundancy but still retains substantial model execution, while existing delta correction methods either support only recurring context relations or maintain memory-intensive online correction states for dynamically changing context. For first seen shared context, these methods also construct a reference cache outside the agent workflow, and an approximate correction at the first agent affects the outputs passed to subsequent agents. We present KVCMAS, an online KV cache correction framework that represents cross-agent cache deviations using compact low-rank states and seamlessly chains corrections along the agent workflow without an additional reference prefill. This design supports dynamically changing shared context while preserving an exact first-agent cache. Across multiple language and vision-language workloads, KVCMAS matches or improves the accuracy of prior KV cache sharing methods while achieving the lowest TTFT under highly concurrent serving. Under controlled serving traces, it provides a 2.0x TTFT speedup over inference without KV cache sharing and reduces peak GPU memory by up to 3.7x relative to a prior KV cache correction method. These results establish KVCMAS as an accurate and scalable KV cache sharing approach for prompt-specialized multi-agent serving.

VideoMLA: Low-Rank Latent KV Cache for Minute-Scale Autoregressive Video Diffusion

Long-rollout causal video diffusion has converged on a fixed-size sliding-window KV cache, with recent progress innovating within this layout by changing which tokens occupy the window or how their positions are encoded. The per-head KV layout itself, a dominant contributor to streaming memory and latency, has been mostly left unchanged. In this paper, we present the first study of Multi-Head Latent Attention (MLA) in video diffusion. VideoMLA replaces per-head keys and values with a shared low-rank content latent and a shared decoupled 3D-RoPE positional key, reducing per-token KV memory by 92.7% at every cached layer. We further investigate why MLA succeeds in video diffusion even though the spectral assumption often used to motivate it in language models does not hold: pretrained video attention is not low-rank, with 99%-energy effective rank far above any practical latent dimension. VideoMLA retains quality at compression ratios where direct spectral approximation would predict large reconstruction error. We show that the MLA bottleneck, rather than the pretrained spectrum, determines the effective rank: both spectral and random initialization occupy nearly the full rank budget from initialization, and training preserves this budget while adapting within it. On VBench, VideoMLA matches short-horizon streaming video diffusion baselines, achieves the best overall score at long horizons among evaluated methods, and improves throughput by 1.23x on a single B200.

mayzovt Virginia Tech
·
May 27 2

Memory-Efficient Looped Transformer: Decoupling Compute from Memory in Looped Language Models

Recurrent LLM architectures have emerged as a promising approach for improving reasoning, as they enable multi-step computation in the embedding space without generating intermediate tokens. Models such as Ouro perform reasoning by iteratively updating internal representations while retaining a standard Key-Value (KV) cache across iterations, causing memory consumption to grow linearly with reasoning depth. Consequently, increasing the number of reasoning iterations can lead to prohibitive memory usage, limiting the practical scalability of such architectures. In this work, we propose Memory-Efficient Looped Transformer (MELT), a novel architecture that decouples reasoning depth from memory consumption. Instead of using a standard KV cache per layer and loop, MELT maintains a single KV cache per layer that is shared across reasoning loops. This cache is updated over time via a learnable gating mechanism. To enable stable and efficient training under this architecture, we propose to train MELT using chunk-wise training in a two phase procedure: interpolated transition, followed by attention-aligned distillation, both from the LoopLM starting model to MELT. Empirically, we show that MELT models fine-tuned from pretrained Ouro parameters outperform standard LLMs of comparable size, while maintaining a memory footprint comparable to those models and dramatically smaller than Ouro's. Overall, MELT achieves constant-memory iterative reasoning without sacrificing LoopLM performance, using only a lightweight post-training procedure.

qualcomm Qualcomm
·
May 7 3

PReCache: Efficient KV Cache Sharing for Multi-LoRA Agents via Low-Rank Precomputation and Neutral Reconstruction

Multi-LoRA agent systems enable efficient role specialization by sharing a common backbone model. However, each agent repeatedly processes the growing shared trajectory and constructs its own KV cache, introducing substantial memory and computation redundancy in long-horizon tasks. Existing KV cache sharing methods reduce this repeated prefill, but they either require additional training or architectural constraints or retain substantial model computation. Moreover, direct cache reuse causes the current agent to rely on cache states generated by the previous agent's adapter, weakening the role-specific behavior encoded by its own LoRA. We present PReCache, a training-free KV cache sharing framework with two designs, namely PreLRShared and ReBaseShared, that share the base cache computed using the pretrained weights and precompute a compact agent-specific low-rank (LR) cache. To remove repeated prefill, PreLRShared precomputes each agent's LR cache when the shared context is first processed, allowing the current agent to use its own LR cache without reprocessing context processed by previous agents. To improve sharing accuracy, ReBaseShared reconstructs the shared base cache from adapter-free hidden states, reducing the remaining error caused by the previous agent's adapted representation. To minimize its reconstruction cost, we propose two inference schemes tailored to single-stream inference and concurrent serving, performing the same reconstruction after each agent's turn or alongside its execution, respectively. Across multiple models and agent benchmarks, PreLRShared achieves up to a 3.1x TTFT speedup and a 2.3x improvement in per-request throughput over inference without KV cache sharing. ReBaseShared best preserves accuracy overall among the evaluated cache-sharing methods, with an average drop of only 1.1 points relative to inference without cache sharing.

TurboMem: High-Performance Lock-Free Memory Pool with Transparent Huge Page Auto-Merging for DPDK

High-speed packet processing on multicore CPUs places extreme demands on memory allocators. In systems like DPDK, fixed-size memory pools back packet buffers (mbufs) to avoid costly dynamic allocation. However, even DPDK's optimized mempool faces scalability limits: lock contention on the shared ring, cache-coherence ping-pong between cores, and heavy TLB pressure from thousands of small pages. To mitigate these issues, DPDK typically uses explicit huge pages (2 MB or 1 GB) for its memory pools. This reduces TLB misses but requires manual configuration and can lead to fragmentation and inflexibility. We propose TurboMem, a novel C++ template-based memory pool that addresses these challenges. TurboMem combines a fully lock-free design (using atomic stacks and per-core local caches) with Transparent Huge Page (THP) auto merging. By automatically promoting pools to 2 MB pages via madvise(MADV_HUGEPAGE), TurboMem achieves the benefits of huge pages without manual setup. We also enforce strict NUMA locality and CPU affinity, so each core allocates and frees objects from its local node. Using Intel VTune on a single-socket 100 Gbps testbed, we show that TurboMem boosts packet throughput by up to 28% while reducing TLB misses by 41% compared to a standard DPDK mempool with explicit huge pages. These results demonstrate that THP auto-merging can outperform manually reserved huge pages in low-fragmentation scenarios, and that modern C++ lock-free programming yields practical gains in data-plane software. Note: The performance claims reported in this preliminary version (up to 28% higher throughput and 41% fewer TLB misses) are based on mock benchmarks. Comprehensive real-system evaluations using Intel VTune are currently underway and will be presented in a future revision.

  • 1 authors
·
Mar 19

Dual-Cache Latent Space Communication between Heterogeneous Language Models

Multi-agent LLM systems split work across models, so answering often requires knowledge that sits in another agent's context: a Sharer has encoded information that a Receiver needs to complete its task. They usually communicate by exchanging text, which puts autoregressive decoding on the critical path and reduces the exchange to a discrete message written without sight of the receiver's state. Recent latent protocols instead translate the sharer's key-value (KV) cache into the receiver's: C2C supports heterogeneous models but requires both to read the same input, while LCF-X removes this shared-context requirement through position-free sharer-cache pooling. Three restrictions remain: LCF-X compresses the sharer alone, supplies the same layer-local summary to every receiver position with no joint cross-layer memory to retrieve from, and assumes matched layer count and KV geometry. We introduce XKV, which lifts all three: learned-query attention pools both caches; self-attention over receiver-aligned layer tokens, with a learned layer map reconciling different depths, mixes the pooled summaries into a compact joint memory; and a shared position decoder lets every raw receiver cache position retrieve its own per-head-gated residual in the receiver's native KV geometry. Both models stay frozen and may differ in family, depth, KV-head count, head dimension, and tokenizer; only the translator is trained. Across 45 dataset-model-pair settings (six heterogeneous and three same-model ordered pairings, five datasets), XKV attains the highest macro score and best average rank, improving on LCF-X on every dataset (by 4.6 exact-match and 4.2 F1 points on ROPES) and surpassing text communication on four of the five, while training 76% fewer parameters and translating a cache pair 10.3x faster (5.8 vs. 59.9 ms); end to end, XKV is 26% faster than LCF-X and 6.8x faster than text communication.

  • 5 authors
·
Aug 19

OxyGen: Unified KV Cache Management for VLA Inference under Multi-Task Parallelism

Embodied AI agents increasingly require parallel execution of multiple tasks, such as manipulation, conversation, and memory construction, from shared observations under distinct time constraints. Recent Mixture-of-Transformers (MoT) Vision-Language-Action Models (VLAs) architecturally support such heterogeneous outputs, yet existing inference systems fail to achieve efficient multi-task parallelism for on-device deployment because of redundant computation and resource contention. We identify isolated KV cache management as the root cause. To address this, we propose unified KV cache management, an inference design that treats the KV cache as a first-class shared resource across tasks and over time. This abstraction enables two key optimizations: cross-task KV sharing eliminates redundant prefill of shared observations, while cross-frame continuous batching decouples variable-length language decoding from fixed-rate action generation across control cycles. We implement this design for π_{0.5}, a popular MoT VLA, and evaluate it on both NVIDIA GeForce RTX 4090 and Jetson AGX Thor, two representative platforms for on-device VLA inference. OxyGen achieves up to 3.7times speedup over isolated execution, delivering over 200 tokens/s language throughput and 70 Hz action frequency simultaneously without degrading action quality, and we further validate the gains on a real humanoid robot with on-board Jetson AGX Thor.

  • 6 authors
·
May 17 2

CloudFormer: An Attention-based Performance Prediction for Public Clouds with Unknown Workload

Cloud platforms are increasingly relied upon to host diverse, resource-intensive workloads due to their scalability, flexibility, and cost-efficiency. In multi-tenant cloud environments, virtual machines are consolidated on shared physical servers to improve resource utilization. While virtualization guarantees resource partitioning for CPU, memory, and storage, it cannot ensure performance isolation. Competition for shared resources such as last-level cache, memory bandwidth, and network interfaces often leads to severe performance degradation. Existing management techniques, including VM scheduling and resource provisioning, require accurate performance prediction to mitigate interference. However, this remains challenging in public clouds due to the black-box nature of VMs and the highly dynamic nature of workloads. To address these limitations, we propose CloudFormer, a dual-branch Transformer-based model designed to predict VM performance degradation in black-box environments. CloudFormer jointly models temporal dynamics and system-level interactions, leveraging 206 system metrics at one-second resolution across both static and dynamic scenarios. This design enables the model to capture transient interference effects and adapt to varying workload conditions without scenario-specific tuning. Complementing the methodology, we provide a fine-grained dataset that significantly expands the temporal resolution and metric diversity compared to existing benchmarks. Experimental results demonstrate that CloudFormer consistently outperforms state-of-the-art baselines across multiple evaluation metrics, achieving robust generalization across diverse and previously unseen workloads. Notably, CloudFormer attains a mean absolute error (MAE) of just 7.8%, representing a substantial improvement in predictive accuracy and outperforming existing methods at least by 28%.

  • 4 authors
·
Sep 3, 2025

Learning Functional Subspaces for Neural Network Compression

Modern transformers pair impressive capabilities with substantial memory and compute demands. Low-rank weight factorization reduces both while keeping the matrices dense, and thus efficient on standard hardware. Existing methods, however, choose the subspace to remove from each weight matrix with local closed-form criteria: activation energy, layer-wise reconstruction error, or a quadratic approximation of the loss. These criteria ignore how errors propagate through the network, so at high compression the errors compound with depth and performance collapses. We introduce Learnable Subspace Projections (LSP), which instead learns the subspaces to discard end-to-end. Each linear layer, or tied group of layers that read the same activations, is assigned an orthogonal projector. All projectors are optimized jointly against a global objective--the KL divergence to the dense model's output distribution or the model's original training loss--while the pretrained weights remain frozen. Projectors are initialized from a whitened SVD truncation, and ranks are allocated by the output KL each projector induces per parameter saved. After training, the projectors merge into standard low-rank factors, with each tied group sharing one factor. In attention, this also lets the model cache one narrow latent in place of full keys and values. Across LLMs (OPT-125M/1.3B, Qwen3-4B, Llama-2-7B) and ViT-B/16, LSP outperforms baselines, and its advantage widens as compression increases. At -70% compression, LSP brings Llama-2-7B to 10.9 WikiText-2 perplexity and 42.2% mean zero-shot accuracy, versus 13.3 and 36.0% for the strongest baseline. The factorized model decodes up to 1.6x faster than the dense model at small batch sizes, and aching the shared latent shrinks the combined memory of weights and KV cache by 13.5x at a 128k-token context, versus at most 6.5x for untied baseline factorizations.

  • 8 authors
·
Sep 29 2

BatchLLM: Optimizing Large Batched LLM Inference with Global Prefix Sharing and Throughput-oriented Token Batching

Many LLM tasks are performed in large batches or even offline, and the performance indictor for which is throughput. These tasks usually show the characteristic of prefix sharing, where different prompt input can partially show the common prefix. However, the existing LLM inference engines tend to optimize the streaming requests and show limitations of supporting the large batched tasks with the prefix sharing characteristic. The existing solutions use the LRU-based cache to reuse the KV context of common prefix. The KV context that is about to be reused may prematurely be evicted with the implicit cache management. Even if not evicted, the lifetime of the shared KV context is extended since requests sharing the same context are not scheduled together, resulting in larger memory usage. These streaming oriented systems schedule the requests in the first-come-first-serve or similar order. As a result, the requests with larger ratio of decoding steps may be scheduled too late to be able to mix with the prefill chunks to increase the hardware utilization. Besides, the token and request number based batching can limit the size of token-batch, which keeps the GPU from saturating for the iterations dominated by decoding tokens. We propose BatchLLM to address the above problems. BatchLLM explicitly identifies the common prefixes globally. The requests sharing the same prefix will be scheduled together to reuse the KV context the best, which also shrinks the lifetime of common KV memory. BatchLLM reorders the requests and schedules the requests with larger ratio of decoding first to better mix the decoding tokens with the latter prefill chunks and applies memory-centric token batching to enlarge the token-batch sizes, which helps to increase the GPU utilization. Extensive evaluation shows that BatchLLM outperforms vLLM by 1.1x to 2x on a set of microbenchmarks and two typical industry workloads.

  • 6 authors
·
Nov 29, 2024

Stochastic KV Routing: Enabling Adaptive Depth-Wise Cache Sharing

Serving transformer language models with high throughput requires caching Key-Values (KVs) to avoid redundant computation during autoregressive generation. The memory footprint of KV caching is significant and heavily impacts serving costs. This work proposes to lessen these memory requirements. While recent work has largely addressed KV cache reduction via compression and eviction along the temporal axis, we argue that the depth dimension offers an orthogonal and robust avenue for optimization. Although prior research suggests that a full cache for every layer is redundant, implementing cross-layer cache sharing remains a practical challenge; existing methods typically suffer from reduced throughput or increased time-to-first-token. In this paper, we demonstrate that dropping a layer's cache offers efficient optimization without information loss. We propose a simple training approach: random cross-layer attention. During training, layers randomly choose to attend either to their own KV states or those of a preceding layer. This stochastic process adapts the model to be robust to various depth-wise cache sharing strategies, ensuring flexibility for unknown hardware constraints at deployment time. Our evaluations show that applying this scheme during pre-training or fine-tuning enables depth-wise cache sharing for various model families. Furthermore, for larger models in data-constrained settings, this approach is suggestive of a regularization-like effect, frequently preserving or improving performance while significantly reducing the cache's memory footprint.

apple Apple
·
Apr 2 1

Hydragen: High-Throughput LLM Inference with Shared Prefixes

Transformer-based large language models (LLMs) are now deployed to hundreds of millions of users. LLM inference is commonly performed on batches of sequences that share a prefix, such as few-shot examples or a chatbot system prompt. Decoding in this large-batch setting can be bottlenecked by the attention operation, which reads large key-value (KV) caches from memory and computes inefficient matrix-vector products for every sequence in the batch. In this work, we introduce Hydragen, a hardware-aware exact implementation of attention with shared prefixes. Hydragen computes attention over the shared prefix and unique suffixes separately. This decomposition enables efficient prefix attention by batching queries together across sequences, reducing redundant memory reads and enabling the use of hardware-friendly matrix multiplications. Our method can improve end-to-end LLM throughput by up to 32x against competitive baselines, with speedup growing with the batch size and shared prefix length. Hydragen also enables the use of very long shared contexts: with a high batch size, increasing the prefix length from 1K to 16K tokens decreases Hydragen throughput by less than 15%, while the throughput of baselines drops by over 90%. Hydragen generalizes beyond simple prefix-suffix decomposition and can be applied to tree-based prompt sharing patterns, allowing us to further reduce inference time on competitive programming problems by 55%.

  • 6 authors
·
Feb 7, 2024 4

Shared Selective Persistent Memory for Agentic LLM Systems

Agentic LLM systems that generate code through multi-turn tool use face a fundamental context problem: each session starts from zero, discarding the configuration choices, domain constraints, data schemas, and tool-use patterns that made previous sessions productive. Naively persisting entire conversation histories is token-inefficient and counterproductive: irrelevant context degrades generation quality. We introduce shared selective persistent memory, an architecture that identifies and retains four categories of reusable context (task specifications, data schemas, tool configurations, and output constraints) while discarding session-specific reasoning traces. Crucially, this memory is shared: workspaces encapsulating selective memory can be transferred across users with role-based access control, enabling collaborative reuse without redundant specification. We implement it in a deployed collaborative workspace platform where LLM agents produce, edit, and maintain git-versioned artifacts (dashboards, reports, and data-driven documents) from heterogeneous sources (CSV, SQL, REST APIs, and MCP servers). A complementary zero-token data refresh mechanism decouples generated programs from runtime data, enabling artifact reuse without re-invocation. Across three enterprise scenarios, shared selective persistent memory achieves 96% task completion (vs. 79% without memory and 71% with full history). Zero-token refresh eliminates LLM re-invocation for recurring updates (14x task-time reduction), while summary-driven generation cuts per-invocation token cost by 97x versus raw data injection. A replication on four public datasets confirms generalizability, with zero-token refresh succeeding in 12/12 trials. Notably, naive full-history persistence actively degrades completion by biasing the agent with stale traces, while selective memory outperforms both extremes.

  • 3 authors
·
Jul 9

SCBench: A KV Cache-Centric Analysis of Long-Context Methods

Long-context LLMs have enabled numerous downstream applications but also introduced significant challenges related to computational and memory efficiency. To address these challenges, optimizations for long-context inference have been developed, centered around the KV cache. However, existing benchmarks often evaluate in single-request, neglecting the full lifecycle of the KV cache in real-world use. This oversight is particularly critical, as KV cache reuse has become widely adopted in LLMs inference frameworks, such as vLLM and SGLang, as well as by LLM providers, including OpenAI, Microsoft, Google, and Anthropic. To address this gap, we introduce SCBench(SharedContextBench), a comprehensive benchmark for evaluating long-context methods from a KV cachecentric perspective: 1) KV cache generation, 2) KV cache compression, 3) KV cache retrieval, 4) KV cache loading. Specifically, SCBench uses test examples with shared context, ranging 12 tasks with two shared context modes, covering four categories of long-context capabilities: string retrieval, semantic retrieval, global information, and multi-task. With it, we provide an extensive KV cache-centric analysis of eight categories long-context solutions, including Gated Linear RNNs, Mamba-Attention hybrids, and efficient methods such as sparse attention, KV cache dropping, quantization, retrieval, loading, and prompt compression. The evaluation is conducted on 8 long-context LLMs. Our findings show that sub-O(n) memory methods suffer in multi-turn scenarios, while sparse encoding with O(n) memory and sub-O(n^2) pre-filling computation perform robustly. Dynamic sparsity yields more expressive KV caches than static patterns, and layer-level sparsity in hybrid architectures reduces memory usage with strong performance. Additionally, we identify attention distribution shift issues in long-generation scenarios. https://aka.ms/SCBench.

  • 11 authors
·
Dec 13, 2024 2

Learning from Others, Acting for You: Cross-User Memory Sharing for LLM Agents

Large language model (LLM) agents serving different users often solve related tasks, yet separate user histories can leave reusable experience inaccessible to other agents. Pooling memories expands access but risks transferring preferences that conflict with the receiving user's requirements. We introduce ShareMem, a memory architecture that shares reusable experience while grounding its application in the receiving user's own preferences. Shared experiences indicate how to act and which preferences to consult; the receiving user's memory supplies their concrete values. Two-stage consolidation refines experience locally before integrating accepted edits into a shared pool. During execution, scope-first retrieval jointly selects local and shared experiences under a common entry budget, while a user-bound channel supports initial and agent-initiated preference retrieval. We evaluate ShareMem across web navigation (Mind2Web), online personalized interaction (VitaBench~2.0), and multi-session coding (MemoryCode) with four backbone models. It improves step success, average task success, and dialogue-macro coding scores, respectively, over matched user-local memory across all four models. Ablations favor two-stage consolidation for smaller shared pools, lower induction token usage, and better downstream performance, and support complementarity between experience guidance and active preference retrieval. Further analyses show that sharing helps most when relevant local experience is scarce, while source quality and cross-user preference interference limit useful transfer.

  • 7 authors
·
Sep 25

Cross-Platform Fused MoE Dispatch in Triton: Portable Expert Routing Without CUDA

Mixture-of-Experts (MoE) architectures power the majority of frontier large language models, but their inference is bottlenecked by irregular memory access patterns and expert routing overhead. Existing optimized MoE kernels (Megablocks, Tutel, FasterMoE) are implemented in CUDA and locked to NVIDIA hardware. We present TritonMoE, a fused MoE dispatch kernel written entirely in OpenAI Triton that performs the complete forward pass -- router scoring, token permutation, expert GEMMs, and weighted output combination -- using only portable Triton primitives. Our key optimization is a fused gate+up GEMM kernel that computes both SwiGLU projections from shared L2-cached input tiles with in-register SiLU activation, eliminating 35% of global memory traffic. On an NVIDIA A100, TritonMoE achieves 89-131% of the throughput of the CUDA-optimized Megablocks at inference batch sizes (<= 512 tokens) across Mixtral-8x7B, DeepSeek-V3, and Qwen2-MoE configurations. All 162 correctness tests pass on both NVIDIA A100 and AMD MI300X with zero code changes, validating cross-platform portability. We additionally characterize sensitivity to routing imbalance under Zipfian-skewed expert assignments and identify the regime -- 64+ experts under extreme skew -- where our fixed-tile scheduling underperforms Megablocks' block-sparse layout, motivating dynamic block-to-expert assignment as future work. Code is available at https://github.com/bassrehab/triton-kernels.

  • 1 authors
·
Apr 6

vAttention: Dynamic Memory Management for Serving LLMs without PagedAttention

Efficient use of GPU memory is essential for high throughput LLM inference. Prior systems reserved memory for the KV-cache ahead-of-time, resulting in wasted capacity due to internal fragmentation. Inspired by OS-based virtual memory systems, vLLM proposed PagedAttention to enable dynamic memory allocation for KV-cache. This approach eliminates fragmentation, enabling high-throughput LLM serving with larger batch sizes. However, to be able to allocate physical memory dynamically, PagedAttention changes the layout of KV-cache from contiguous virtual memory to non-contiguous virtual memory. This change requires attention kernels to be rewritten to support paging, and serving framework to implement a memory manager. Thus, the PagedAttention model leads to software complexity, portability issues, redundancy and inefficiency. In this paper, we propose vAttention for dynamic KV-cache memory management. In contrast to PagedAttention, vAttention retains KV-cache in contiguous virtual memory and leverages low-level system support for demand paging, that already exists, to enable on-demand physical memory allocation. Thus, vAttention unburdens the attention kernel developer from having to explicitly support paging and avoids re-implementation of memory management in the serving framework. We show that vAttention enables seamless dynamic memory management for unchanged implementations of various attention kernels. vAttention also generates tokens up to 1.97x faster than vLLM, while processing input prompts up to 3.92x and 1.45x faster than the PagedAttention variants of FlashAttention and FlashInfer.

  • 5 authors
·
May 7, 2024

Learning to Share: Selective Memory for Efficient Parallel Agentic Systems

Agentic systems solve complex tasks by coordinating multiple agents that iteratively reason, invoke tools, and exchange intermediate results. To improve robustness and solution quality, recent approaches deploy multiple agent teams running in parallel to explore diverse reasoning trajectories. However, parallel execution comes at a significant computational cost: when different teams independently reason about similar sub-problems or execute analogous steps, they repeatedly perform substantial overlapping computation. To address these limitations, in this paper, we propose Learning to Share (LTS), a learned shared-memory mechanism for parallel agentic frameworks that enables selective cross-team information reuse while controlling context growth. LTS introduces a global memory bank accessible to all teams and a lightweight controller that decides whether intermediate agent steps should be added to memory or not. The controller is trained using stepwise reinforcement learning with usage-aware credit assignment, allowing it to identify information that is globally useful across parallel executions. Experiments on the AssistantBench and GAIA benchmarks show that LTS significantly reduces overall runtime while matching or improving task performance compared to memory-free parallel baselines, demonstrating that learned memory admission is an effective strategy for improving the efficiency of parallel agentic systems. Project page: https://joefioresi718.github.io/LTS_webpage/

  • 5 authors
·
Feb 5

Collaborative Memory: Multi-User Memory Sharing in LLM Agents with Dynamic Access Control

Complex tasks are increasingly delegated to ensembles of specialized LLM-based agents that reason, communicate, and coordinate actions-both among themselves and through interactions with external tools, APIs, and databases. While persistent memory has been shown to enhance single-agent performance, most approaches assume a monolithic, single-user context-overlooking the benefits and challenges of knowledge transfer across users under dynamic, asymmetric permissions. We introduce Collaborative Memory, a framework for multi-user, multi-agent environments with asymmetric, time-evolving access controls encoded as bipartite graphs linking users, agents, and resources. Our system maintains two memory tiers: (1) private memory-private fragments visible only to their originating user; and (2) shared memory-selectively shared fragments. Each fragment carries immutable provenance attributes (contributing agents, accessed resources, and timestamps) to support retrospective permission checks. Granular read policies enforce current user-agent-resource constraints and project existing memory fragments into filtered transformed views. Write policies determine fragment retention and sharing, applying context-aware transformations to update the memory. Both policies may be designed conditioned on system, agent, and user-level information. Our framework enables safe, efficient, and interpretable cross-user knowledge sharing, with provable adherence to asymmetric, time-varying policies and full auditability of memory operations.

  • 6 authors
·
May 22, 2025

SAW-INT4: System-Aware 4-Bit KV-Cache Quantization for Real-World LLM Serving

KV-cache memory is a major bottleneck in real-world LLM serving, where systems must simultaneously support latency-sensitive small-batch requests and high-throughput concurrent workloads. Although many KV-cache compression methods improve offline accuracy or compression ratio, they often violate practical serving constraints such as paged memory layouts, regular memory access, and fused attention execution, limiting their effectiveness in deployment. In this work, we identify the minimal set of 4-bit KV-cache quantization methods that remain viable under these constraints. Our central finding is that a simple design--token-wise INT4 quantization with block-diagonal Hadamard rotation--consistently achieves the best accuracy-efficiency trade-off. Across multiple models and benchmarks, this approach recovers nearly all of the accuracy lost by naive INT4, while more complex methods such as vector quantization and Hessian-aware quantization provide only marginal additional gains once serving compatibility is taken into account. To make this practical, we implement a fused rotation-quantization kernel that integrates directly into paged KV-cache layouts and introduces zero measurable end-to-end overhead, matching plain INT4 throughput across concurrency levels. Our results show that effective KV-cache compression is fundamentally a systems co-design problem: under real serving constraints, lightweight block-diagonal Hadamard rotation is a viable method that delivers near-lossless accuracy without sacrificing serving efficiency.

  • 11 authors
·
Apr 20

LMCache: An Efficient KV Cache Layer for Enterprise-Scale LLM Inference

KV cache has traditionally been stored in GPU memory to accelerate the decoding phase of large language model (LLM) inference. However, it is increasingly necessary to move KV caches outside GPU devices, to enable cache reuse across different queries and inference engines. Our real-world usage statistics confirm this trend: over time, the total KV cache stored by users has grown rapidly, far exceeding the capacity of GPU memory. Despite this need, there lacks an efficient solution for offloading and transferring KV caches. We present LMCACHE, the first and so far the most efficient open-source KV caching solution, which extracts and stores KV caches generated by modern LLM engines (vLLM and SGLang) out of the GPU memory and shares them across engines and queries. LMCACHE supports both cache offloading (prefix reuse across queries) and prefill-decode (PD) disaggregation (cross-engine/GPU cache transfer). LMCACHE's high performance and wide adoption stem from the following contributions: (1) highly optimized KV cache data movement powered by batched data movement operations, compute and I/O pipelining; (2) a modular KV cache connector component, decoupling LMCACHE from the rapid evolution of inference engines; (3) a first-class control API for flexible cache orchestration across GPU, CPU, storage, and network layers. Our evaluation shows that combining LMCACHE with vLLM achieves up to 15x improvement in throughput across workloads such as multi-round question answering and document analysis. Large-scale adoption of LMCACHE in enterprise settings provides us valuable insights, for example, fetching KV cache from remote storage has unsurprisingly benefits to prefill delay, and that context truncation, which is a widely applied technique in industry, can greatly reduce prefix cache hit ratio by half. The source code of LMCACHE is at: https://github.com/LMCache/LMCache.

  • 11 authors
·
Oct 7, 2025

SiliconBench: Speed, Memory, and Fidelity for LLM Serving on Unified-Memory Desktops

Concurrent local LLM serving on unified-memory desktops must preserve memory headroom and output fidelity, which speed-only rankings overlook. We introduce SiliconBench, which evaluates nine Apple Silicon serving engines through three lenses: speed, memory, and fidelity. We evaluate chat and agent serving on Qwen3, Qwen3.5, and Gemma 4. We use a classification task to check for quality regressions against an NVIDIA reference. DGX Spark provides a complementary serving-performance reference. Three desiderata guide interpretation: serving architecture readiness, memory discipline, and multi-node scaling. On Qwen3-0.6B, vllm-metal alone more than doubles throughput on both workloads from concurrency 1 to 16. CUDA vLLM and SGLang show stronger concurrency scaling on the same prompts. Explicit memory budgets do not guarantee memory headroom: two stacks complete every request while memory use approaches physical capacity and throughput declines. The newer model architectures have narrower engine support. Their evaluated implementations match the fidelity reference. Only three stacks satisfy the completion, fidelity, and model-coverage gates. Comparisons on larger dense and MoE models reinforce the importance of scheduling prompt processing alongside ongoing generation: vllm-metal's packed prefill-decode path maintains lower first-token latency than omlx under concurrent load. In the tested two-machine configurations, tensor parallelism over Thunderbolt RDMA scales while pipeline parallelism over TCP regresses. We release benchmark code, per-run results, and maintenance journals, supported by a workflow combining bounded agent fixes with human review.

FastSwitch: Optimizing Context Switching Efficiency in Fairness-aware Large Language Model Serving

Serving numerous users and requests concurrently requires good fairness in Large Language Models (LLMs) serving system. This ensures that, at the same cost, the system can meet the Service Level Objectives (SLOs) of more users , such as time to first token (TTFT) and time between tokens (TBT), rather than allowing a few users to experience performance far exceeding the SLOs. To achieve better fairness, the preemption-based scheduling policy dynamically adjusts the priority of each request to maintain balance during runtime. However, existing systems tend to overly prioritize throughput, overlooking the overhead caused by preemption-induced context switching, which is crucial for maintaining fairness through priority adjustments. In this work, we identify three main challenges that result in this overhead. 1) Inadequate I/O utilization. 2) GPU idleness. 3) Unnecessary I/O transmission during multi-turn conversations. Our key insight is that the block-based KV cache memory policy in existing systems, while achieving near-zero memory waste, leads to discontinuity and insufficient granularity in the KV cache memory. To respond, we introduce FastSwitch, a fairness-aware serving system that not only aligns with existing KV cache memory allocation policy but also mitigates context switching overhead. Our evaluation shows that FastSwitch outperforms the state-of-the-art LLM serving system vLLM with speedups of 1.4-11.2x across different tail TTFT and TBT.

  • 3 authors
·
Nov 27, 2024

A Survey on Large Language Model Acceleration based on KV Cache Management

Large Language Models (LLMs) have revolutionized a wide range of domains such as natural language processing, computer vision, and multi-modal tasks due to their ability to comprehend context and perform logical reasoning. However, the computational and memory demands of LLMs, particularly during inference, pose significant challenges when scaling them to real-world, long-context, and real-time applications. Key-Value (KV) cache management has emerged as a critical optimization technique for accelerating LLM inference by reducing redundant computations and improving memory utilization. This survey provides a comprehensive overview of KV cache management strategies for LLM acceleration, categorizing them into token-level, model-level, and system-level optimizations. Token-level strategies include KV cache selection, budget allocation, merging, quantization, and low-rank decomposition, while model-level optimizations focus on architectural innovations and attention mechanisms to enhance KV reuse. System-level approaches address memory management, scheduling, and hardware-aware designs to improve efficiency across diverse computing environments. Additionally, the survey provides an overview of both text and multimodal datasets and benchmarks used to evaluate these strategies. By presenting detailed taxonomies and comparative analyses, this work aims to offer useful insights for researchers and practitioners to support the development of efficient and scalable KV cache management techniques, contributing to the practical deployment of LLMs in real-world applications. The curated paper list for KV cache management is in: https://github.com/TreeAI-Lab/Awesome-KV-Cache-Management{https://github.com/TreeAI-Lab/Awesome-KV-Cache-Management}.

  • 10 authors
·
Dec 26, 2024

Out of the Memory Barrier: A Highly Memory Efficient Training System for LLMs with Million-Token Contexts

Training Large Language Models (LLMs) on long contexts is severely constrained by prohibitive GPU memory overhead, not training time. The primary culprits are the activations, whose memory footprints scale linearly with sequence length. We introduce OOMB, a highly memory-efficient training system that directly confronts this barrier. Our approach employs a chunk-recurrent training framework with on-the-fly activation recomputation, which maintains a constant activation memory footprint (O(1)) and shifts the primary bottleneck to the growing KV cache. To manage the KV cache, OOMB integrates a suite of synergistic optimizations: a paged memory manager for both the KV cache and its gradients to eliminate fragmentation, asynchronous CPU offloading to hide data transfer latency, and page-level sparse attention to reduce both computational complexity and communication overhead. The synergy of these techniques yields exceptional efficiency. Our empirical results show that for every additional 10K tokens of context, the end-to-end training memory overhead increases by a mere 10MB for Qwen2.5-7B. This allows training Qwen2.5-7B with a 4M-token context on a single H200 GPU, a feat that would otherwise require a large cluster using context parallelism. This work represents a substantial advance in resource efficiency for long-context LLM training. The source code is available at https://github.com/wenhaoli-xmu/OOMB.

  • 10 authors
·
Feb 28

RedKnot: Efficient Long-Context LLM Serving with Head-Aware KV Reuse and SegPagedAttention

As the input length of large language model (LLM) serving continues to grow, the KV cache has become a dominant bottleneck in AI infrastructure. It limits GPU memory capacity, serving concurrency, cache reuse, and distributed scalability. Multiple important problems, including position-independent KV cache, prefix KV cache compression, hot/cold KV cache separation, and distributed KV cache management, all depend on how the KV cache is represented and managed. However, existing serving systems largely rely on a monolithic KV cache abstraction, where the KV cache is treated as a homogeneous sequence of token-level memory blocks and managed with similar policies across attention heads and serving scenarios. We observe that KV cache utility is highly structured across KV heads: different heads exhibit different functional roles, attention distances, and runtime importance. Therefore, a full KV cache is not always necessary for every head, token range, or serving scenario. We present RedKnot, a head-aware KV cache management system for LLM serving. RedKnot breaks the conventional monolithic KV cache abstraction by decomposing the KV cache along KV heads, whose importance and effective attention ranges vary significantly across serving scenarios. This head-level decomposition turns the KV cache from a monolithic tensor abstraction into a structured memory object, enabling RedKnot to uniformly support position-independent KV reuse, prefix KV compression, hot/cold KV separation, and distributed KV placement while preserving output fidelity and improving resource efficiency, without requiring model retraining or fine-tuning. RedKnot establishes a new foundation for AI infrastructure by transforming the KV cache from a monolithic, passive runtime artifact into a dynamic, model-aware runtime substrate for scalable LLM serving.

  • 8 authors
·
Jun 25

Efficient Arbitrary Precision Acceleration for Large Language Models on GPU Tensor Cores

Large language models (LLMs) have been widely applied but face challenges in efficient inference. While quantization methods reduce computational demands, ultra-low bit quantization with arbitrary precision is hindered by limited GPU Tensor Core support and inefficient memory management, leading to suboptimal acceleration. To address these challenges, we propose a comprehensive acceleration scheme for arbitrary precision LLMs. At its core, we introduce a novel bipolar-INT data format that facilitates parallel computing and supports symmetric quantization, effectively reducing data redundancy. Building on this, we implement an arbitrary precision matrix multiplication scheme that decomposes and recovers matrices at the bit level, enabling flexible precision while maximizing GPU Tensor Core utilization. Furthermore, we develop an efficient matrix preprocessing method that optimizes data layout for subsequent computations. Finally, we design a data recovery-oriented memory management system that strategically utilizes fast shared memory, significantly enhancing kernel execution speed and minimizing memory access latency. Experimental results demonstrate our approach's effectiveness, with up to 2.4\times speedup in matrix multiplication compared to NVIDIA's CUTLASS. When integrated into LLMs, we achieve up to 6.7\times inference acceleration. These improvements significantly enhance LLM inference efficiency, enabling broader and more responsive applications of LLMs.

  • 4 authors
·
Sep 26, 2024

The Evolution of Attention in Large Language Models: Mechanisms, Trade-offs, and Emerging Trends

Self-attention gives LLMs fine-grained, query-dependent access to context, but dense token interactions incur quadratic prefill cost and a key--value cache growing with context length. Research thus spans explicit-memory compression, sparse access, recurrent state construction, structured state dynamics, and heterogeneous mechanism composition. This survey analyzes these developments as model-internal contextual memory. We introduce a five-dimensional lens---Memory Representation, Memory Update, Access, Readout, and Integration---describing what is represented, how it changes, what is query-eligible, how it is read, and how readouts form outputs. This lens compares overlapping research lines without imposing one computational model. We reconstruct mechanism-level developments and architectural adoption using 59 release-level records from 14 major model lineages and 11 high-performing open-weight endpoints. First, explicit-memory and recurrent-state methods retain distinct interfaces but increasingly control overlapping memory functions. Second, heterogeneous architectures increasingly coordinate across network depth: layer-wise composition distributes complementary memory processing across representational stages, while cross-layer reuse carries selected memory and routing artifacts forward. Depth thus becomes a dimension along which contextual memory is constructed and managed. Third, these developments motivate a stateful multidimensional memory-routing hypothesis: persistent memory is organized across temporal scope, network depth, substrate type, and representation granularity, while coordinated Sparse Write and Sparse Read determine what is maintained and what contributes to each query. Overall, efficient sequence architecture design increasingly concerns the organization, lifecycle, and selective use of contextual memory rather than an isolated Attention operator.

  • 6 authors
·
Sep 29 2

HYPIC: Accelerating Hybrid-Attention LLM Serving with Position-Independent Caching

In retrieval-augmented generation and agentic LLM serving, prompts are assembled from independent segments into long contexts, making the prefill stage dominate per-request cost. Two directions have emerged to reduce this cost: position-independent caching (PIC) admits KV reuse for non-contiguous segments shared across requests, while hybrid-attention models cut computation by replacing most full-attention layers with linear attention. However, they cannot coexist: applying existing PIC methods to hybrid-attention models breaks down because per-token KV-cache reuse primitives do not transfer to the per-request recurrent state. We present Hypic, the first system to accelerate hybrid-attention LLM serving with position-independent caching. For linear-attention layers, we identify the segment-cumulative transition operator as the missing algebraic primitive and cache it alongside each segment's zero-start end-state, enabling near-exact and constant-time composition of independently cached segments. For the remaining full-attention layers, existing PIC methods also fail because linear layers do not expose the per-token hidden states needed for selective recomputation. We show that the largest deviations concentrate at segment beginnings and construct a small seam window that propagates hidden states through the hybrid-attention stack to repair cross-segment attention. Finally, Hypic introduces segment parallelism, which exploits PIC's segment-level self-containment to parallelize cache-miss prefill across instances, turning long cold requests into an accelerable workload. Evaluated across four hybrid-attention models and five workloads, Hypic reduces time-to-first-token by 3.25times on average and improves QPS by 1.66times over Prefix Cache, while preserving task quality with a 1.71-point gap from Full Recompute.

  • 7 authors
·
Jul 11

IC-Cache: Efficient Large Language Model Serving via In-context Caching

Large language models (LLMs) have excelled in various applications, yet serving them at scale is challenging due to their substantial resource demands and high latency. Our real-world studies reveal that over 70% of user requests to LLMs have semantically similar counterparts, suggesting the potential for knowledge transfer among requests. However, naively caching and reusing past responses leads to a big quality drop. In this paper, we introduce IC-Cache, a caching system that enables live LLM capability augmentation to improve serving efficiency: by leveraging historical request-response pairs from larger models as in-context examples, IC-Cache empowers small LLMs to imitate and even exceed the compositional abilities (e.g., reasoning) of their larger counterparts, enabling selective offloading of requests to reduce cost and latency. Achieving this live augmentation at scale introduces intricate trade-offs between response quality, latency, and system throughput. For a new request, IC-Cache efficiently selects similar, high-utility examples to prepend them to the new request's input. At scale, it adaptively routes requests across LLMs of varying capabilities, accounting for response quality and serving loads. IC-Cache employs a cost-aware cache replay mechanism that refines example quality offline to maximize online cache utility and efficiency. Evaluations on millions of realistic requests demonstrate that IC-Cache improves LLM serving throughput by 1.4-5.9x and reduces latency by 28-71% without hurting response quality.

  • 10 authors
·
Jan 22, 2025

Efficient Inference of Vision Instruction-Following Models with Elastic Cache

In the field of instruction-following large vision-language models (LVLMs), the efficient deployment of these models faces challenges, notably due to the high memory demands of their key-value (KV) caches. Conventional cache management strategies for LLMs focus on cache eviction, which often fails to address the specific needs of multimodal instruction-following models. Recognizing this gap, in this paper, we introduce Elastic Cache, a novel approach that benefits from applying distinct acceleration methods for instruction encoding and output generation stages. We investigate the metrics of importance in different stages and propose an importance-driven cache merging strategy to prune redundancy caches. Instead of discarding less important caches, our strategy identifies important key/value vectors as anchor points. Surrounding less important caches are then merged with these anchors, enhancing the preservation of contextual information in the KV caches while yielding an arbitrary acceleration ratio. For instruction encoding, we utilize the frequency to evaluate the importance of caches. Regarding output generation, we prioritize tokens based on their distance with an offset, by which both the initial and most recent tokens are retained. Results on a range of LVLMs demonstrate that Elastic Cache not only boosts efficiency but also notably outperforms existing pruning methods in language generation across various tasks. Code is available at https://github.com/liuzuyan/ElasticCache

  • 8 authors
·
Jul 25, 2024 2

SJMalloc: the security-conscious, fast, thread-safe and memory-efficient heap allocator

Heap-based exploits that leverage memory management errors continue to pose a significant threat to application security. The root cause of these vulnerabilities are the memory management errors within the applications, however various hardened allocator designs have been proposed as mitigation. A common feature of these designs is the strategic decision to store heap metadata separately from the application data in use, thereby reducing the risk of metadata corruption leading to security breaches. Despite their potential benefits, hardened allocators have not been widely adopted in real-world applications. The primary barrier to their adoption is the performance overheads they introduce. These overheads can negatively impact the efficiency and speed of applications, which is a critical consideration for developers and system administrators. Having learned from previous implementations, we developed SJMalloc, a general-purpose, high-performance allocator that addresses these concerns. SJMalloc stores its metadata out-of-band, away from the application's data on the heap. This design choice not only enhances security but also improves performance. Across a variety of real-world workloads, SJMalloc demonstrates a ~6% performance improvement compared to GLibcs allocator, while using only ~5% more memory. Furthermore, SJMalloc successfully passes the generic elements of the GLibc malloc testsuite and can thus be used as a drop-in replacement for the standard allocator, offering an easy upgrade path for enhanced security and performance without requiring changes to existing applications.

  • 1 authors
·
Oct 23, 2024

Characterizing High Bandwidth Flash for LLM Serving

Large language model (LLM) serving requires substantial memory to store model weights and KV caches. As models grow larger and contexts become longer, memory capacity and bandwidth increasingly become bottlenecks for serving performance. Agentic workloads compound this pressure through repeated interactions over growing contexts, making it increasingly important to retain KV state for reuse. High-bandwidth flash (HBF) offers a way to expand accelerator memory capacity for large language model (LLM) serving, but its access costs and limited write endurance complicate its use. We evaluate HBF for high-throughput agentic serving across system design and scheduling choices to understand when additional capacity improves serving performance and energy efficiency. We introduce an HBM-HBF-host hierarchical storage system and buffered cache-aware scheduling, and use trace-driven simulations to analyze their effects on performance, energy consumption, and HBF write lifetime. Across the evaluated workloads, the fastest HBF-augmented systems reduce completion time by 36.1-87.7% relative to HBM-only systems. Modeled energy savings reach 59.1%, with benefits depending on the workload and weight placement. Buffered cache-aware scheduling extends estimated HBF write lifetime from 1.21 to 14.82 years in the evaluated configuration. These results demonstrate the importance of coordinating data placement and scheduling to improve serving efficiency while sustaining a practical HBF write lifetime.

  • 10 authors
·
Oct 4

Model Tells You Where to Merge: Adaptive KV Cache Merging for LLMs on Long-Context Tasks

How to efficiently serve Large Language Models (LLMs) has become a pressing issue because of their huge computational cost in their autoregressive generation process. To mitigate computational costs, LLMs often employ the KV Cache technique to improve the generation speed. While improving the computational efficiency, the storage requirements of the KV cache are substantial, particularly in long-context scenarios, leading to significant memory consumption. Existing KV cache eviction methods often degrade the performance of LLMs in long-context scenarios due to the information loss introduced by eviction. In this paper, we propose a novel KV cache merging approach, called KVMerger, to achieve adaptive KV cache compression for long-context tasks without significant performance degradation under constrained memory budgets. Our approach is inspired by the intriguing observation that key states exhibit high similarity at the token level within a single sequence. To facilitate merging, we develop an effective yet straightforward merging set identification algorithm to identify suitable KV states for merging. Our merging set identification algorithm stimulates the second observation that KV cache sparsity, from similarity perspective, is independent of the dataset and remains persistent at the model level. Subsequently, we propose a Gaussian kernel weighted merging algorithm to selectively merge all states within each merging set. We conduct extensive experiments to demonstrate the effectiveness of KVMerger for long-context tasks under constrained memory budgets, applying it to models including Llama2-7B-chat and Llama2-13B-chat. Using the LongBench and ZeroScroll benchmarks, we compare our method with other KV cache compression techniques, including H2O and CaM, showing that our method achieves superior performance across tasks with both 50% and 35% KV cache budgets.

  • 4 authors
·
Jul 11, 2024 2

AGENTSERVESIM: A Hardware-aware Simulator for Multi-Turn LLM Agent Serving

Multi-turn LLM agents interleave model calls with external tool invocations, shifting serving from stateless request processing to stateful program execution. Serving these workloads requires scheduling, KV-cache management, and routing policies that use program-level context, including turn dependencies, tool-induced gaps, and reusable KV state. Evaluating such policies directly on real systems is costly, since each design point may require dedicated accelerator time across arrival rates, model scales, serving-instance counts, and memory hierarchies. Simulation offers a scalable alternative, but existing LLM serving simulators target stateless request-level workloads and therefore omit the core dynamics of agent serving: multi-turn program execution, cross-turn cache locality, and KV-cache residency during tool gaps. We present AGENTSERVESIM, a hardware-aware simulator for multi-turn LLM agent serving. AGENTSERVESIM evaluates serving policies at program granularity through composable modules: a Program Orchestrator preserves program identity and turn order, a Tool Simulator materializes tool-induced gaps, a Session-Aware Router maintains program-to-instance affinity for cache-aware dispatch, and a KV Residency Model tracks policy-defined KV placement across HBM, host DRAM/CXL, and eviction. Across real serving deployments and hardware configurations, AGENTSERVESIM reproduces real-system behavior within 6% error across key performance metrics while running entirely on commodity CPUs. These results show that AGENTSERVESIM enables controlled, repeatable exploration of agent-serving policies without requiring exhaustive deployment on costly accelerators.

  • 3 authors
·
Jun 17

LLM Inference in a Flash!

Large Language Models (LLMs) have shown impressive capabilities across a range of natural language processing tasks, and LLM inference has emerged as a critical workload for enabling downstream applications. The demands of serving LLM inference are becoming increasingly challenging as requests shift toward longer sequences and heavier inference, driven by retrieval-augmented generation, inference-time compute scaling, and long-context applications. Additionally, these challenges are compounded by hardware trends, as memory capacity and communication bandwidth are not scaling as fast as increases in workload complexity. Compute-in-Flash is a promising solution to address memory bandwidth limitations by moving computation close to memory, and to exploit the large capacity of SSD technologies. However, it is challenging to deploy LLMs on these systems as they lack support for high-precision floating point operations and have limited write endurance. In our work, we aim to address these challenges by designing inference algorithms to enable LLM inference on Flash compute-in-memory devices. We present an end-to-end integer-only quantization approach to eliminate expensive floating-point computations. To address the limited write endurance, we design a dictionary-based KV cache compression strategy based on sparse dictionary coding that represents each KV vector as a linear combination of static dictionary vectors. These algorithmic improvements enable us to exploit the benefits of Compute-in-Flash for both model weights and KV cache, and to minimize expensive data transfer operations. Across Llama-3.1-8B and Qwen-2.5-7B, our combined method exhibits limited accuracy degradation while reducing dynamic KV cache traffic by 15times.

  • 8 authors
·
Sep 13

Flash-dLLM: IO-Aware KV Caching and Parallel Decoding for Fast, Memory-Efficient Diffusion LLMs

Diffusion Large Language Models (dLLMs) have recently emerged as a promising alternative to autoregressive LLMs by enabling non-autoregressive text generation. However, their practical deployment remains limited by inefficient inference, largely due to the absence of effective Key-Value (KV) caching and scalable parallel decoding mechanisms. Existing acceleration methods typically study KV caching and parallel decoding in isolation, overlooking the I/O bottlenecks that arise when cache reuse and parallel token verification are jointly applied. In this work, we introduce Flash-dLLM, a training-free inference acceleration framework for fast and memory-efficient dLLMs. Flash-dLLM first identifies GPU memory I/O as a dominant bottleneck in KV-cache-enabled dLLM inference and addresses it with an I/O-aware fused KV-cache kernel that reduces redundant memory movement. Building on this optimized cache mechanism, Flash-dLLM further proposes an efficient KV-cache-driven draft-and-verify decoding strategy, where the dLLM itself serves as both drafter and verifier without requiring an auxiliary model. This unified design enables faster decoding while preserving generation quality and improving scalability to longer sequences and larger batch size. Extensive experiments on mathematical reasoning and code-generation benchmarks demonstrate that Flash-dLLM consistently outperforms existing state-of-the-art dLLM acceleration methods in both inference speed and memory efficiency. In particular, it achieves 5.1times and 11.0times speedups over prior strongest baseline Elastic-Cache on GSM8K and HumanEval, respectively.

WindowKV: Task-Adaptive Group-Wise KV Cache Window Selection for Efficient LLM Inference

With the advancements in long-context inference capabilities of large language models (LLMs), the KV cache has become one of the foundational components. However, its substantial GPU memory consumption makes KV cache compression a key technique for enabling efficient LLM inference in industrial scenarios. While recent studies have focused on optimizing the memory occupied by the KV cache, they overlook two critical factors: preserving semantic coherence and considering task-specific characteristic during compression. To address these limitations, we propose a novel task-adaptive KV cache window selection method, WindowKV. WindowKV dynamically selects local semantic windows consisting of consecutive tokens, according to task-specific characteristics, ensuring the retained KV cache captures continuous, essential context. Additionally, we introduce an intra-group layer KV cache indices sharing strategy to reduce computational overhead, achieving a balance between performance and efficiency. We rigorously evaluate WindowKV on the LongBench benchmark, and the results demonstrate that it maintains a performance comparable to full KV cache retention while using only 12% of the original KV cache, significantly reducing memory requirements. Furthermore, our method also achieves state-of-the-art results in the Needle-in-a-Haystack evaluation, highlighting its effectiveness and robustness.

  • 6 authors
·
Mar 22, 2025

KEEP: A KV-Cache-Centric Memory Management System for Efficient Embodied Planning

Memory-augmented Large Language Models (LLMs) have demonstrated remarkable capability for complex and long-horizon embodied planning. By keeping track of past experiences and environmental states, memory enables LLMs to maintain a global view, thereby avoiding repetitive exploration. However, existing approaches often store the memory as raw text, leading to excessively long prompts and high prefill latency. While it is possible to store and reuse the KV caches, the efficiency benefits are greatly undermined due to frequent KV cache updates. In this paper, we propose KEEP, a KV-cache-centric memory management system for efficient embodied planning. KEEP features 3 key innovations: (1) a Static-Dynamic Memory Construction algorithm that reduces KV cache recomputation by mixed-granularity memory group; (2) a Multi-hop Memory Re-computation algorithm that dynamically identifies important cross-attention among different memory groups and reconstructs memory interactions iteratively; (3) a Layer-balanced Memory Loading that eliminates unbalanced KV cache loading and cross-attention computation across different layers. Extensive experimental results have demonstrated that KEEP achieves 2.68x speedup with negligible accuracy loss compared with text-based memory methods on ALFRED dataset. Compared with the KV re-computation method CacheBlend (EuroSys'25), KEEP shows 4.13% success rate improvement and 1.90x time-to-first-token (TTFT) reduction. Our code is available on https://github.com/PKU-SEC-Lab/KEEP_Embodied_Memory.

  • 6 authors
·
Mar 16

Cache-Craft: Managing Chunk-Caches for Efficient Retrieval-Augmented Generation

Retrieval-Augmented Generation (RAG) is often used with Large Language Models (LLMs) to infuse domain knowledge or user-specific information. In RAG, given a user query, a retriever extracts chunks of relevant text from a knowledge base. These chunks are sent to an LLM as part of the input prompt. Typically, any given chunk is repeatedly retrieved across user questions. However, currently, for every question, attention-layers in LLMs fully compute the key values (KVs) repeatedly for the input chunks, as state-of-the-art methods cannot reuse KV-caches when chunks appear at arbitrary locations with arbitrary contexts. Naive reuse leads to output quality degradation. This leads to potentially redundant computations on expensive GPUs and increases latency. In this work, we propose Cache-Craft, a system for managing and reusing precomputed KVs corresponding to the text chunks (we call chunk-caches) in RAG-based systems. We present how to identify chunk-caches that are reusable, how to efficiently perform a small fraction of recomputation to fix the cache to maintain output quality, and how to efficiently store and evict chunk-caches in the hardware for maximizing reuse while masking any overheads. With real production workloads as well as synthetic datasets, we show that Cache-Craft reduces redundant computation by 51% over SOTA prefix-caching and 75% over full recomputation. Additionally, with continuous batching on a real production workload, we get a 1.6X speed up in throughput and a 2X reduction in end-to-end response latency over prefix-caching while maintaining quality, for both the LLaMA-3-8B and LLaMA-3-70B models.

  • 9 authors
·
Feb 5, 2025

LOCI: Spatial Linear Memory for Streaming World Models

When a camera revisits a previously observed region, a video world model should reproduce what was there before. This requires both remembering past observations and retrieving the right one for the current viewpoint. Key-value caches preserve visual detail but grow with video length; recurrent memory is compact but compresses history into a fixed-size state, so individual past observations are no longer directly accessible. We introduce LOCI, a hybrid spatial-memory architecture that keeps both representations. In half of the transformer blocks, main attention keeps a key-value cache of past observations; in the other half, it is restricted to the current chunk and complemented by a recurrent linear-attention memory whose reads and writes are conditioned on projective camera geometry, so viewpoint enters both memory addressing and stored content. Recurrent readouts flow into subsequent cache-backed blocks and supply their queries with accumulated scene context. On the public MIND memory benchmark and on held-out recorded trajectories, LOCI reproduces revisited content more faithfully than representative world models and a same-recipe full-softmax model; with full history, it lowers peak memory at equal length by about 30% relative to full softmax. With a bounded bank of retained observations, it streams long videos at constant memory and remains more faithful than full softmax under the same budget.

Memory for Large Language Models

Memory has evolved into a foundational architectural dimension in large language models (LLMs), shifting from an implicit byproduct of computation to a spectrum of explicit, controllable mechanisms. While recent advances introduce diverse strategies---spanning transient attention, recurrent state dynamics, parameter-efficient adaptations, and scalable lookup storage---this rapid evolution has led to a highly fragmented research landscape. In this survey, we present a systematic, architecture-centric taxonomy of memory in LLMs. Our framework characterizes memory along three orthogonal axes: representation (implicit versus explicit), update dynamics (offline versus online), and persistence (short-term versus long-term). We further formalize the granular mechanisms dictating memory writing, routing, state transitions, and consolidation. This unified perspective elucidates the conceptual boundaries between computation-coupled and independently addressable memory, effectively bridging disparate architectural paradigms. Additionally, we critically analyze hybrid memory architectures, system-level efficiency trade-offs, and multi-dimensional evaluation methodologies. By consolidating these scattered advancements into a cohesive framework, this survey charts the trajectory of memory-centric LLM design and provides a principled foundation for future innovations in scalable and adaptive language modeling.

When Classic Cache Policies Fail: Learning-Augmented Replacement for Semantic Retrieval Buffers

LLM agents increasingly rely on retrieval buffers to store and reuse past experience, yet the cache management policies governing these buffers remain largely ad-hoc. We formalize this as an online semantic cache replacement problem with switching costs, where items are matched by embedding similarity and hit quality is continuous rather than binary. Through experiments on two datasets from MemoryBench-Full (LoCoMo, DialSim) with 8 replacement policies, we reveal a surprising finding: classic heuristics (LRU, LFU) consistently underperform the naive FIFO baseline on semantic workloads, due to the absence of temporal locality and frequency concentration. We propose SOLAR, a learning-augmented framework that derives modification timing from regret accumulation (achieving sim17\% modification rate) and content selection from Bayesian online learning over implicit retrieval feedback. We prove SOLAR achieves a constant competitive ratio leq 3, independent of cache size and horizon (vs.\ Ω(K) for FIFO), and eviction regret O(KTlog T), matching the Ω(KT) lower bound up to logarithmic factors. Experiments demonstrate 5--75\% relative improvement over FIFO at tight cache sizes, with a clearly characterized phase transition at the working set boundary. Synthetic experiments with 5000-item pools further reveal an inverted-U relationship between pool size and retrieval quality, justifying capacity constraints as a retrieval noise phenomenon rather than a storage limitation.

tencent Tencent
·
Jun 30 2

LLMServingSim 2.0: A Unified Simulator for Heterogeneous and Disaggregated LLM Serving Infrastructure

Large language model (LLM) serving infrastructures are undergoing a shift toward heterogeneity and disaggregation. Modern deployments increasingly integrate diverse accelerators and near-memory processing technologies, introducing significant hardware heterogeneity, while system software increasingly separates computation, memory, and model components across distributed resources to improve scalability and efficiency. As a result, LLM serving performance is no longer determined by hardware or software choices in isolation, but by their runtime interaction through scheduling, data movement, and interconnect behavior. However, understanding these interactions remains challenging, as existing simulators lack the ability to jointly model heterogeneous hardware and disaggregated serving techniques within a unified, runtime-driven framework. This paper presents LLMServingSim 2.0, a unified system-level simulator designed to make runtime-driven hardware-software interactions in heterogeneous and disaggregated LLM serving infrastructures explicit and analyzable. LLMServingSim 2.0 embeds serving decisions and hardware behavior into a single runtime loop, enabling interaction-aware modeling of batching, routing, offloading, memory, and power. The simulator supports extensible integration of emerging accelerators and memory systems through profile-based modeling, while capturing dynamic serving behavior and system-level effects. We validate LLMServingSim 2.0 against real deployments, showing that it reproduces key performance, memory, and power metrics with an average error of 0.95%, while maintaining simulation times of around 10 minutes even for complex configurations. These results demonstrate that LLMServingSim 2.0 provides a practical bridge between hardware innovation and serving-system design, enabling systematic exploration and co-design for next-generation LLM serving infrastructures.

  • 4 authors
·
Feb 26

KVShare: An LLM Service System with Efficient and Effective Multi-Tenant KV Cache Reuse

Recent advances in long-text understanding have pushed the context length of large language models (LLMs) up to one million tokens. It boosts LLMs's accuracy and reasoning capacity but causes exorbitant computational costs and unsatisfactory Time to First Token (TTFT). KV cache reuse, which reuses the exact same KV cache of prefixes and templates or shares similar ones but with extra selective recomputation, offers a promising way to tackle this issue. However, prior studies overlook the cross-request KV reuse and the attention deviations introduced by new tokens during the decoding stage. In this paper, we present a KV cache management module that shares the KV cache across requests under multi-tenant scenarios without sacrificing model accuracy. Our system, KVShare, enables accurate and efficient LLM serving by 1) a Dual-Stage High Deviation algorithm (DHD) that conditionally selects a small portion of KV cache to be recomputed during both prefill and decode phases, and 2) a cache-aware scheduler that prioritizes requests based on their KV cache hit rates and orchestrates continuous batching to achieve enhanced system efficiency and faster TTFT. Multi-task experiments conducted on models such as Qwen2.5-7B,Llama3.1-8B and Yi1.5-9B demonstrate that KVShare reduces TTFT by up to 9.39x and increases 1.2x of the throughput compared to the full KV recompute. Moreover, KVShare achieves 20.38% boost in terms of accuracy compared to SOTA methods.

  • 8 authors
·
Mar 17, 2025

MiniCache: KV Cache Compression in Depth Dimension for Large Language Models

A critical approach for efficiently deploying computationally demanding large language models (LLMs) is Key-Value (KV) caching. The KV cache stores key-value states of previously generated tokens, significantly reducing the need for repetitive computations and thereby lowering latency in autoregressive generation. However, the size of the KV cache grows linearly with sequence length, posing challenges for applications requiring long context input and extensive sequence generation. In this paper, we present a simple yet effective approach, called MiniCache, to compress the KV cache across layers from a novel depth perspective, significantly reducing the memory footprint for LLM inference. Our approach is based on the observation that KV cache states exhibit high similarity between the adjacent layers in the middle-to-deep portion of LLMs. To facilitate merging, we propose disentangling the states into the magnitude and direction components, interpolating the directions of the state vectors while preserving their lengths unchanged. Furthermore, we introduce a token retention strategy to keep highly distinct state pairs unmerged, thus preserving the information with minimal additional storage overhead. Our MiniCache is training-free and general, complementing existing KV cache compression strategies, such as quantization and sparsity. We conduct a comprehensive evaluation of MiniCache utilizing various models including LLaMA-2, LLaMA-3, Phi-3, Mistral, and Mixtral across multiple benchmarks, demonstrating its exceptional performance in achieving superior compression ratios and high throughput. On the ShareGPT dataset, LLaMA-2-7B with 4-bit MiniCache achieves a remarkable compression ratio of up to 5.02x, enhances inference throughput by approximately 5x, and reduces the memory footprint by 41% compared to the FP16 full cache baseline, all while maintaining near-lossless performance.

  • 6 authors
·
May 23, 2024 2

Back from the Future: Key-Value Cache Management by Counter-Causal Surprise

Key-value (KV) cache management through compression and eviction strategies has emerged as an important research direction in recent years. Computational demands of large language models (LLMs) and their multi-modal variants during output generation can be partially alleviated by caching previous key and value calculations needed by subsequent scaled dot-product attention operations. However, this leads to another problem: the size of the resulting KV cache grows linearly with context length and quickly consumes all available GPU memory when either the prompt or the generated output are long. KV cache management periodically prunes entries from the cache thereby reducing its memory footprint while attempting to retain sufficient information for accurate generation. A by-product is faster inference speed. We propose a simple yet effective KV eviction scheme motivated by the insight that past tokens which can be well-predicted from more recent tokens are redundant and their associated keys and values can be removed from the cache. To score entries for eviction we run the model on the tokens in their original order, reusing the key and value representations already stored in the KV cache, and applying a counter-causal attention mask so that each position attends only to its future context. This is in-distribution, tied directly to the actual cache contents, and requires no additional training. To further reduce cost, we additionally propose a fast single-layer approximation that restricts the counter-causal pass to the last transformer layer, achieving a significant speedup per refresh cycle at marginal accuracy cost. We evaluate our strategy on various open-source LLMs and benchmark datasets showing competitive or improved performance over other state-of-the-art methods. Reference code is available at https://github.com/metacognitionai/counter_causal.

  • 2 authors
·
Jul 29

SpecRouter: Adaptive Routing for Multi-Level Speculative Decoding in Large Language Models

Large Language Models (LLMs) present a critical trade-off between inference quality and computational cost: larger models offer superior capabilities but incur significant latency, while smaller models are faster but less powerful. Existing serving strategies often employ fixed model scales or static two-stage speculative decoding, failing to dynamically adapt to the varying complexities of user requests or fluctuations in system performance. This paper introduces , a novel framework that reimagines LLM inference as an adaptive routing problem solved through multi-level speculative decoding. dynamically constructs and optimizes inference "paths" (chains of models) based on real-time feedback, addressing the limitations of static approaches. Our contributions are threefold: (1) An adaptive model chain scheduling mechanism that leverages performance profiling (execution times) and predictive similarity metrics (derived from token distribution divergence) to continuously select the optimal sequence of draft and verifier models, minimizing predicted latency per generated token. (2) A multi-level collaborative verification framework where intermediate models within the selected chain can validate speculative tokens, reducing the verification burden on the final, most powerful target model. (3) A synchronized state management system providing efficient, consistent KV cache handling across heterogeneous models in the chain, including precise, low-overhead rollbacks tailored for asynchronous batch processing inherent in multi-level speculation. Preliminary experiments demonstrate the validity of our method.

  • 6 authors
·
May 11, 2025

XQuant: Breaking the Memory Wall for LLM Inference with KV Cache Rematerialization

Although LLM inference has emerged as a critical workload for many downstream applications, efficiently inferring LLMs is challenging due to the substantial memory footprint and bandwidth requirements. In parallel, compute capabilities have steadily outpaced both memory capacity and bandwidth over the last few decades, a trend that remains evident in modern GPU hardware and exacerbates the challenge of LLM inference. As such, new algorithms are emerging that trade increased computation for reduced memory operations. To that end, we present XQuant, which takes advantage of this trend, enabling an order-of-magnitude reduction in memory consumption through low-bit quantization with substantial accuracy benefits relative to state-of-the-art KV cache quantization methods. We accomplish this by quantizing and caching the layer input activations X, instead of using standard KV caching, and then rematerializing the Keys and Values on-the-fly during inference. This results in an immediate 2times memory savings compared to KV caching. By applying XQuant, we achieve up to sim 7.7times memory savings with <0.1 perplexity degradation compared to the FP16 baseline. Furthermore, our approach leverages the fact that X values are similar across layers. Building on this observation, we introduce XQuant-CL, which exploits the cross-layer similarity in the X embeddings for extreme compression. Across different models, XQuant-CL attains up to 10times memory savings relative to the FP16 baseline with only 0.01 perplexity degradation, and 12.5times memory savings with only 0.1 perplexity degradation. XQuant exploits the rapidly increasing compute capabilities of hardware platforms to eliminate the memory bottleneck, while surpassing state-of-the-art KV cache quantization methods and achieving near-FP16 accuracy across a wide range of models.

  • 10 authors
·
Aug 14, 2025 2

Cache-to-Cache: Direct Semantic Communication Between Large Language Models

Multi-LLM systems harness the complementary strengths of diverse Large Language Models, achieving performance and efficiency gains unattainable by a single model. In existing designs, LLMs communicate through text, forcing internal representations to be transformed into output token sequences. This process both loses rich semantic information and incurs token-by-token generation latency. Motivated by these limitations, we ask: Can LLMs communicate beyond text? Oracle experiments show that enriching the KV-Cache semantics can improve response quality without increasing cache size, supporting KV-Cache as an effective medium for inter-model communication. Thus, we propose Cache-to-Cache (C2C), a new paradigm for direct semantic communication between LLMs. C2C uses a neural network to project and fuse the source model's KV-cache with that of the target model to enable direct semantic transfer. A learnable gating mechanism selects the target layers that benefit from cache communication. Compared with text communication, C2C utilizes the deep, specialized semantics from both models, while avoiding explicit intermediate text generation. Experiments show that C2C achieves 8.5-10.5% higher average accuracy than individual models. It further outperforms the text communication paradigm by approximately 3.0-5.0%, while delivering an average 2.0x speedup in latency. Our code is available at https://github.com/thu-nics/C2C.

nics-efc Tsinghua-NICS-EFC
·
Oct 3, 2025 9

VeriCache: Turning Lossy KV Cache into Lossless LLM Inference

The large size of the KV cache has become a major bottleneck for serving LLMs with increasing context lengths. In response, many KV cache compression methods, such as token dropping and quantization, have been proposed. However, almost all of these methods are inherently lossy-despite minimal accuracy degradation for short outputs, their outputs increasingly diverge from full-KV-cache outputs as more tokens are decoded, which leads to catastrophic failures in code generation and tool calling. We present VeriCache, the first inference framework that ensures the same output as full-KV-cache decoding but largely preserves the high decoding throughput of a range of KV cache compression algorithms. VeriCache uses the compressed KV cache to draft tokens, then verifies them against the full KV cache. While it may seem like just speculative decoding, VeriCache requires addressing a key system challenge to work-keeping the full KV cache out of GPU memory and minimizing the overhead of swapping it in for verification. The insight is two-fold: (1) compressed-KV decoding can be parallelized with full-KV swap, because one is HBM-bandwidth-bound and the other is PCIe/network-bound, and (2) the compressed KV cache often produces output similar to the full KV cache, allowing a long drafting horizon to amortize each full-KV swap. VeriCache applies to both long-context decoding and remote prefix caching, supports a broad family of token-dropping and quantization methods through a uniform compressor interface, and composes with traditional speculative decoding. Experimental results show that VeriCache achieves up to 4X higher throughput than full-KV inference while producing identical outputs.

  • 10 authors
·
May 16

Analysis and Optimized CXL-Attached Memory Allocation for Long-Context LLM Fine-Tuning

The growing prevalence of Large Language Models (LLMs) and their substantial memory requirements have prompted renewed interest in CPU offloading as a method to compensate for limited GPU memory. In particular, when CPU memory is leveraged to temporarily store intermediate states of LLMs, CPU memory becomes a new bottleneck and soon reaches the capacity limitation of commodity CPUs. In this work, we investigate the effectiveness of Compute Express Link (CXL) add-in card (AIC) memory as an extension to CPU memory, enabling larger model sizes and longer context lengths during fine-tuning. Through extensive benchmarking, this study quantifies the performance overhead introduced by transferring data between CXL memory, CPU, and GPUs, focusing on how concurrency and data volume influence bandwidth utilization and latency. This study also compares CPUbased optimizer steps when model parameters, gradients, and optimizer states reside in local memory versus CXL memory, revealing that naive adoption of CXL often degrades performance during the optimizer phase. To overcome these challenges, this study proposes a CXL-aware allocation to strategically partition CPU offloading workloads across both local and CXL memory. This study further demonstrates that employing multiple AICs significantly reduces bandwidth contention, thus improving scalability. Experimental results show that these optimizations enable efficient long-context LLM fine-tuning, underscoring CXL as a promising avenue for unlocking the full potential of CPU offloading in long-context LLM fine-tuning.

  • 2 authors
·
Jul 4, 2025

Comparative Characterization of KV Cache Management Strategies for LLM Inference

Efficient inference with Large Language Models (LLMs) increasingly relies on Key-Value (KV) caches to store previously computed key and value vectors at each layer. These caches are essential to minimize redundant computation during autoregressive token generation, lowering computational complexity from quadratic to linear. However, the growth of KV caches has posed significant system-level challenges, particularly as model sizes increase, context lengths grow, and concurrent requests compete for limited memory resources. Even though several recent frameworks for KV cache management have emerged, their comparative trade-offs in memory consumption and inference performance have not been fully understood, especially under varying request sizes and model configurations. In this work, we conduct an empirical study of three state-of-the-art KV cache management frameworks: vLLM, InfiniGen, and H2O. These frameworks employ techniques such as tensor offloading, token eviction heuristics, and speculative scheduling to balance memory usage and performance. We evaluate their performance in terms of a range of metrics such as latency, throughput, and memory usage across a spectrum of key parameters including request rates, model sizes, and sparsity levels. Our results pinpoint the conditions for each framework to perform the best, revealing the most suitable selection and configuration of KV cache strategies under memory and performance constraints.

  • 4 authors
·
Apr 5

IceCache: Memory-efficient KV-cache Management for Long-Sequence LLMs

Key-Value (KV) cache plays a crucial role in accelerating inference in large language models (LLMs) by storing intermediate attention states and avoiding redundant computation during autoregressive generation. However, its memory footprint scales linearly with sequence length, often leading to severe memory bottlenecks on resource-constrained hardware. Prior work has explored offloading KV cache to the CPU while retaining only a subset on the GPU, but these approaches often rely on imprecise token selection and suffer performance degradation in long-generation tasks such as chain-of-thought reasoning. In this paper, we propose a novel KV cache management strategy, IceCache, which integrates semantic token clustering with PagedAttention. By organizing semantically related tokens into contiguous memory regions managed by a hierarchical, dynamically updatable data structure, our method enables more efficient token selection and better utilization of memory bandwidth during CPU-GPU transfers. Experimental results on LongBench show that, with a 256-token budget, IceCache maintains 99% of the original accuracy achieved by the full KV cache model. Moreover, compared to other offloading-based methods, IceCache attains competitive or even superior latency and accuracy while using only 25% of the KV cache token budget, demonstrating its effectiveness in long-sequence scenarios. The code is available on our project website at https://yuzhenmao.github.io/IceCache/.

  • 4 authors
·
Apr 11 2

KIVI: A Tuning-Free Asymmetric 2bit Quantization for KV Cache

Efficiently serving large language models (LLMs) requires batching many requests together to reduce the cost per request. Yet, the key-value (KV) cache, which stores attention keys and values to avoid re-computations, significantly increases memory demands and becomes the new bottleneck in speed and memory usage. This memory demand increases with larger batch sizes and longer context lengths. Additionally, the inference speed is limited by the size of KV cache, as the GPU's SRAM must load the entire KV cache from the main GPU memory for each token generated, causing the computational core to be idle during this process. A straightforward and effective solution to reduce KV cache size is quantization, which decreases the total bytes taken by KV cache. However, there is a lack of in-depth studies that explore the element distribution of KV cache to understand the hardness and limitation of KV cache quantization. To fill the gap, we conducted a comprehensive study on the element distribution in KV cache of popular LLMs. Our findings indicate that the key cache should be quantized per-channel, i.e., group elements along the channel dimension and quantize them together. In contrast, the value cache should be quantized per-token. From this analysis, we developed a tuning-free 2bit KV cache quantization algorithm, named KIVI. With the hardware-friendly implementation, KIVI can enable Llama (Llama-2), Falcon, and Mistral models to maintain almost the same quality while using 2.6times less peak memory usage (including the model weight). This reduction in memory usage enables up to 4times larger batch size, bringing 2.35times sim 3.47times throughput on real LLM inference workload. The source code is available at https://github.com/jy-yuan/KIVI.

  • 8 authors
·
Feb 5, 2024 1

MemForest: An Efficient Agent Memory System with Hierarchical Temporal Indexing

Memory is a fundamental component for enabling long-context LLM agents, supporting persistent state across interactions through a continuous serve-and-update lifecycle. Despite substantial prior work, existing systems suffer from significant maintenance overhead due to two key limitations: coarse-grained state management and inherently sequential update pipelines. In particular, updates are often tightly coupled with LLM inference and require full-state rewrites, leading to poor scalability and growing latency as memory accumulates. To address these challenges, we present MemForest, a memory framework that reformulates agent memory as a write-efficient temporal data management problem. MemForest breaks the sequential bottleneck via parallel chunk extraction, decoupling memory construction into concurrent, independent operations. To further eliminate coarse-grained maintenance, we introduce MemTree, a hierarchical temporal index that organizes memory as time-ordered trees rather than flat global summaries. This design replaces full-state rewrites with localized per-node updates, reducing maintenance cost to the affected tree paths while naturally preserving temporally evolving states. We evaluate MemForest on two long-context memory benchmarks, LongMemEval-S and LoCoMo. On LongMemEval-S, MemForest achieves the best overall performance among stateful baselines, reaching 79.8% pass@1 accuracy while sustaining a memory construction throughput approximately 6x higher than state-of-the-art approaches including EverMemOS.

  • 9 authors
·
May 15 3

KV Cache Optimization Strategies for Scalable and Efficient LLM Inference

The key-value (KV) cache is a foundational optimization in Transformer-based large language models (LLMs), eliminating redundant recomputation of past token representations during autoregressive generation. However, its memory footprint scales linearly with context length, imposing critical bottlenecks on GPU memory capacity, memory bandwidth, and inference throughput as production LLMs push context windows from thousands to millions of tokens. Efficient KV cache management has thus become a first-order challenge for scalable LLM deployment. This paper provides a systematic review of recent KV cache optimization techniques, organizing them into five principal directions: cache eviction, cache compression, hybrid memory solutions, novel attention mechanisms, and combination strategies. For each category we analyze the underlying mechanisms, deployment trade-offs, and empirical performance across memory reduction, throughput, and model accuracy metrics. We further map techniques to seven practical deployment scenarios, including long-context single requests, high-throughput datacenter serving, edge devices, multi-turn conversations, and accuracy-critical reasoning, providing actionable guidance for practitioners selecting among competing approaches. Our analysis reveals that no single technique dominates across all settings; instead, the optimal strategy depends on context length, hardware constraints, and workload characteristics, pointing toward adaptive, multi-stage optimization pipelines as a promising direction for future research.

  • 3 authors
·
Mar 19

DiffSynth-Music: Audio-Conditioned KV-Cache Adapters for Controllable Music Generation

Text and lyrics specify broad musical characteristics and sung content but offer limited control over musical timing, melody, and reference-based style. We introduce DiffSynth-Music (https://modelscope.cn/models/DiffSynth-Studio/DiffSynth-Music), a framework that adds composable audio conditioning to a music synthesis backbone through layer-wise key-value injection. The three template models, Control, Prosody, and Reference, are initialized from the backbone diffusion transformer and trained with conditional flow matching. They support five control types: beats, vocals, accompaniment, prosody, and reference audio. A shared variational autoencoder maps conditioning waveforms into a common latent space, enabling their attention memories to be combined. With the template timestep fixed at the clean-data endpoint and other inputs held constant, each control cache is computed once and reused throughout sampling. Training pairs are derived from music recordings using beat extraction, source separation, vocal resynthesis, and reference-excerpt selection. Single-control evaluations on Mandarin and English songs demonstrate improved adherence across all five control types and better lyric fidelity under vocal conditioning relative to the backbone. Automatic music-quality and instruction-following scores remain broadly comparable to those of the evaluated base models, with metric-specific trade-offs. We release the three template models to support research and creative applications in controllable music generation.

  • 4 authors
·
Sep 10

Lineage-Aware Memory Governance: A Derivation-Gated Framework for Privacy-Preserving Column-Level Access Control in Enterprise AI Agents

Enterprise AI agents that share a memory store face two unaddressed risks: sensitive data can leak through legitimately computed results the requester could not derive, and departments can silently compute a same-named key performance indicator (KPI) through conflicting logic. Existing agent-memory systems (e.g., MemGPT, Zep, A-MEM) gate retrieval by content, ownership, and role, not derivation, missing a cached insight that embeds a forbidden column. We introduce the Analytical Memory Unit (AMU), a memory schema that attaches a full derivation (lineage) graph to every cached result, gated by a retrieval policy that serves a hit only when the requester is authorised for every column touched. Provided lineage recording is complete, we prove by construction that the policy blocks retrieval of results derived from a sensitive column outside the requester's permissions, at O(n) worst case -- a conditional design guarantee, not an empirical claim, that excludes derived features encoding sensitive information without naming their source. Eliminating measured leakage required 75-90% recorded lineage completeness, so we treat 90% as a conservative deployment target. Across six experiments, lineage-gated retrieval removes the 18.8-25.5% cross-department leakage naive content-gated memory suffers, keeping 81.5-82.6% of memory reuse at 13.8 microsecond worst-case overhead. A real-agent proof-of-concept with LLM-generated SQL is consistent with the guarantee: zero leaks over 9 round-trips, two conflicts caught automatically -- though a feasibility demonstration, not evidence of production viability. This offers a practical governance layer for shared agent memory, complementing source-layer access control and supporting EU AI Act compliance.

  • 2 authors
·
Oct 4 2

HiSparse: Scaling Sparse-Attention Decoding with Hierarchical KV Cache Management

Top-k sparse attention makes long-context LLM decoding cheap to compute: each step reads only a few thousand selected KV entries rather than the full context. Serving systems, however, typically keep the entire KV cache in GPU HBM so that every position stays selectable, so a request's memory bill still grows with its full context length--decoding hits a capacity wall long before it runs out of compute, and a context whose KV cache exceeds HBM cannot be served at all. We present HiSparse, an exact, indexer-agnostic hierarchical KV cache for sparse-attention serving. HiSparse keeps each request's full KV history in host memory and bounds its decode footprint with a small, fixed-size GPU cache; a fused CUDA kernel resolves each layer's selections--hit detection, LRU replacement, and host-to-device fetches--inside the decode CUDA graph; and, for models that share selections across layers, exact layer-wise prefetching hides roughly half of the remaining miss overhead. Because only KV placement changes, model outputs are unchanged. HiSparse is merged into upstream SGLang and evaluated across three sparse-attention families (DSA, NSA, and Quest) on H200, B200, and GH200 platforms: it improves peak generation throughput by up to 4.7x on long-context workloads while preserving comparable per-token latency and reducing time-to-first-token at high load--and a no-IO oracle shows the resolution mechanism itself adds no measurable per-token cost, leaving host-device IO as the only price of bounded residency.

  • 6 authors
·
Aug 6

CacheBlend: Fast Large Language Model Serving for RAG with Cached Knowledge Fusion

Large language models (LLMs) often incorporate multiple text chunks in their inputs to provide the necessary contexts. To speed up the prefill of the long LLM inputs, one can pre-compute the KV cache of a text and re-use the KV cache when the context is reused as the prefix of another LLM input. However, the reused text chunks are not always the input prefix, and when they are not, their precomputed KV caches cannot be directly used since they ignore the text's cross-attention with the preceding text in the LLM input. Thus, the benefits of reusing KV caches remain largely unrealized. This paper tackles just one question: when an LLM input contains multiple text chunks, how to quickly combine their precomputed KV caches in order to achieve the same generation quality as the expensive full prefill (i.e., without reusing KV cache)? We present CacheBlend, a scheme that reuses the pre-computed KV caches, regardless prefix or not, and selectively recomputes the KV values of a small subset of tokens to partially update each reused KV cache. In the meantime,the small extra delay for recomputing some tokens can be pipelined with the retrieval of KV caches within the same job,allowing CacheBlend to store KV caches in slower devices with more storage capacity while retrieving them without increasing the inference delay. By comparing CacheBlend with the state-of-the-art KV cache reusing schemes on three open-source LLMs of various sizes and four popular benchmark datasets of different tasks, we show that CacheBlend reduces time-to-first-token (TTFT) by 2.2-3.3X and increases the inference throughput by 2.8-5X, compared with full KV recompute, without compromising generation quality or incurring more storage cost.

  • 9 authors
·
May 26, 2024

Locret: Enhancing Eviction in Long-Context LLM Inference with Trained Retaining Heads

Large language models (LLMs) have shown remarkable advances in supporting long-context comprehension and processing tasks. However, scaling the generation inference of LLMs to such long contexts incurs significant additional computation load, and demands a substantial GPU memory footprint to maintain the key-value (KV) cache of transformer-based LLMs. Existing KV cache compression methods, such as quantization, face memory bottlenecks as context length increases, while static-sized caches, such as eviction, suffer from inefficient policies. These limitations restrict deployment on consumer-grade devices like a single Nvidia 4090 GPU. To overcome this, we propose Locret, a framework for long-context LLM inference that introduces retaining heads to evaluate the causal importance of KV cache units, allowing for more accurate eviction within a fixed cache size. Locret is fine-tuned on top of the frozen backbone LLM using a minimal amount of data from standard long-context SFT datasets. During inference, we evict low-importance cache units along with a chunked prefill pattern, significantly reducing peak GPU memory usage. We conduct an extensive empirical study to evaluate Locret, where the experimental results show that Locret outperforms the recent competitive approaches, including InfLLM, Quantization, SirLLM, and MInference, in terms of memory efficiency and the quality of generated contents -- Locret achieves over a 20x and 8x KV cache compression ratio compared to the full KV cache for Phi-3-mini-128K and Llama-3.1-8B-instruct. Additionally, Locret can be combined with other methods, such as quantization and token merging. To our knowledge, Locret is the first framework capable of deploying Llama-3.1-8B or similar models on a single Nvidia 4090 GPU, enabling 128K long-context inference without compromising generation quality, and requiring little additional system optimizations.

  • 5 authors
·
Oct 2, 2024